Magtek Payment Applications Services Quick Installation Guide
- Category
- POS terminals
- Type
- Quick Installation Guide
This manual is also suitable for
DOWNLOAD: Tap the Google Play Store or Amazon Apps icon on the main screen of your mobile device. Enter Google or Amazon
password and user name. (Create an account if you don’t have one already.) Search for QwickPAY and select from the list. Tap on
INSTALL. The App will automatically install on your device. Once it is installed you will see the icon on your main screen.
DEMO: In the app tap on Menu then Merchant Info> and choose your demo mode (with or without a secure card reader authenticator). The
demo credentials will automatically complete, you just need to enter your Email address and tap DONE. To disable Demo Mode login with
your live Merchant credentials.
Download and Demo
2.
CUSTOMIZE: Custom receipts brand your business and enable you to create receipts with your address, return policies and any other
message you would like. Once you have your QwickPAY subscription credentials and merchant account you are ready to login. Go
to the virtual terminal to set up your custom receipts using your Windows PC or Mac and open a browser (Chrome, Safari, Firefox, or Internet
Explorer). Under SETTINGS go to CUSTOM RECEIPTS add your Logo, header, and footer. You can also add a signature line which allows you to print
out receipts for hard copy signature after transactions are completed. Be certain to SAVE your updates.
The next time you login to your virtual terminal or mobile App the latest version of the custom receipt will automatically load. In the virtual terminal
you can make sales*, create reports, change your password, access documentation, and view sales history.
PASSWORD CHANGE NOTE: If you change your password at the virtual terminal, you will also need to change it on your mobile device.
*VIRTUAL TERMINAL NOTE: If you will be using your virtual terminal to perform transactions, you will need to use a current Windows or Mac based
OS, and install and run a Java Applet.
Customize
3.
MagTek® Inc., 1710 Apollo Court, Seal Beach, CA 90740 p 562.546.6335 | f 562.546.6569 I www.QwickPAY.com | www.magtek.com
Registered to ISO 9001:2008 © Copyright 2016 MagTek, Inc. PN D99800068 rev. 140 5/16
Get your credentials
LOGIN CREDENTIALS: Your merchant service provider, who originally setup your QwickPAY account, will send your login information
(QwickPAY Merchant ID and password) via email. If you have not yet received your credentials, be sure to contact your service provider
directly. You can visit www.qwickpay.com/support/index.html to locate your service provider’s contact information and request your ID and password.
1.
QwickPAY
Virtual Terminal
Android/Desktop - BulleT
Quick Installation Guide
4.
The power switch is located on the front of the reader.
Press to turn ON (default is 120 seconds).
Hold 1 second to extend ON.
Hold 3 seconds to turn OFF.
Power Switch
LED Indicator
Connect - BulleT
LED
Color
LED Condition USB
Connection
Meaning
Off Off n/a No power
Green Steady On -- Ready to read a card—after power button pushed
Green Rapid Flashing No Searching for wireless connection
Green Slow Blinking -- Authentication has been established; ready to
read a card
Green On 2 seconds -- Good Read
Amber Steady On Yes Battery fully charged
Amber Short Flash No After power button is pushed
Amber Slow Blinking Yes Battery charging
Red Steady On -- Authentication failed
Red Rapid Flashing Yes Battery voltage too low to operate normally
Red On 2 seconds -- Bad card swipe
CHARGE: Attach the USB cable. It takes approximately 2.5 hours to fully charge the battery and it will stay charged for approximately
100 card swipes. The LED will slowly blink amber while the battery is charging and then turn solid amber when the battery is fully
charged (for best results, allow the battery to fully charge).
USB HID CONNECTION: Insert the Micro-B end of the cable into
Micro-B port on the bottom of the reader and the Standard-A
connector into a USB port on the PC/Mac. USB connection will
automatically detect your device.
WIRELESS CONNECTION
PAIRING AND CONNECTING
• On your Android device pull up APPLICATIONS or MENU
(depending on your Android device) and select SETTINGS.
• Select WIRELESS AND NETWORK.
• Select WIRELESS SETTINGS.
• Turn on the BulleT reader; a green light will flash when the
device is trying to connect.
• On your Android device select SCAN FOR DEVICES.
• Select the MAGTEK DEVICE when it appears on the screen.
• The screen will prompt you for a PIN (the default is 1234).
• The device is PAIRED BUT NOT CONNECTED to QwickPAY.
• Go to the QwickPAY Application on your device.
• In the App, the top red bar shows the device is not connected.
• Press the ‘Android MENU’ button on your Android device and
choose CONNECT.
• Connect to the desired MAGTEK WIRELESS device.
• The top green bar shows the device is now connected.
• The device is now ready to use.
Make a Sale with QwickPAY or QwickPAY Pro. Visit www.qwickpay.com/support for details
5.
QwickPAY iOS User Manual QwickPAY Android User Manual
QwickPAY Pro iOS User Guide QwickPAY Virtual Terminal User Guide
Your merchant service provider (who originally setup your QwickPAY system) is your best resource for support.
Visit the QwickPAY website [LINK http://www.qwickpay.com/support/index.html] to choose your service provider to find out how you can contact them.
Visit www.qwickpay.com/support
Support
OS: Android 2.3.3 or newer
Connection: Wireless or USB
Interface: Wireless (USB is used for charging the battery)
Power: Battery powered; battery is charged from a 5V source, e.g., USB bus
Card Speed: 4 to 60 ips
Electrical Current: 100mA maximum during charge
Operating Temp: 32°F - 113°F ( 0 - 45°C)
Operating Humidity: 10% to 90% noncondensing
Accessories: Optional stylus is available
Specs.
-
1
-
2
Magtek Payment Applications Services Quick Installation Guide
- Category
- POS terminals
- Type
- Quick Installation Guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Magtek Payment Applications Services User manual
-
-
-
-
-
-
-
-
-
