USB+VGA+Stereo Audio Wall Plate Manual
Wall Plate includes:
1 x USB Female to Female
1 x VGA Female to Female
1 x Audio RCA Female to Female white/red
INSTALLATION:
Choose a mounting location that has existing wiring or where you can easily run wire
through the wall. You must use a standard electrical box.
1. Run USB,VGA and RCA cable from the desired source through the wall into the
electrical box.
2. Plug the USB,VGA and RCA cable into the USB,VGA and RCA jack on the
back of the wall plate.
3. Put the wall plate on the electrical box, insert the supplied mounting bolts into the
top and bottom large holes on the mounting bracket, then tighten them.
4. Plug the receiving device's USB,VGA and RCA cable into the USB,VGA and RCA
jack on the front of the wall plate.
USB+VGA+Stereo Audio Wall Plate Manual
Wall Plate includes:
1 x USB Female to Female
1 x VGA Female to Female
1 x Audio RCA Female to Female white/red
INSTALLATION:
Choose a mounting location that has existing wiring or where you can easily run wire
through the wall. You must use a standard electrical box.
1. Run USB,VGA and RCA cable from the desired source through the wall into the
electrical box.
2. Plug the USB,VGA and RCA cable into the USB,VGA and RCA jack on the
back of the wall plate.
3. Put the wall plate on the electrical box, insert the supplied mounting bolts into the
top and bottom large holes on the mounting bracket, then tighten them.
4. Plug the receiving device's USB,VGA and RCA cable into the USB,VGA and RCA
jack on the front of the wall plate.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Calrad Electronics 40-998-HS Datasheet
-
Vision TC2-15MCABLES Specification
-
Extron Hideaway HSA 402 User guide
-
LOGON TCOCMUAB30U User manual
-
Sharp 300-732WH User manual
-
ATEN TAKSATA050DL User manual
-
Atlona AT-LC-1.5 User manual
-
Vision TC2 7M2PHO Datasheet
-
TANDBERG Telepresence T3 User manual
-
Barco DICOM Theater Lite User manual
