6
equipment.
compliance could void the user's authority to operate the
are not expressly approved by the party responsible for
Any changes or modifications in construction of this device which
CAUTION
Interline transfer type CCD
EIA : 290,000 pixels
1/3 Inch
Focal length 2.9mm
Maximum aperture F=2.0
Internal
380TV lines
0.1 Lux Minimum
Minimum 44dB (at AGC off)
12V DC
2.5W
-30 C to +50 C
(-22 F to +122 F)
0.65Kg (1.5lbs)
94(W) X 48(H) X 38(D) mm
Camera bracket : 1 EA
Adhesive vinyl tape : 1 EA
Angle adjusting screws : 4 EA
(with spring. flat washer)
4mm bolts : 4 EA
(with spring. flat washer)
Camera cable 66ft(20m)
Dimensions:
Accessories Supplied
SPECIFICATIONS
MONITOR(BE-255M)
CAMERA(BE-255C)
ft(5m)16.5 cable Power
4EAwashers Flat
Maximum 20W consumption Power
4EAwashers Spring
DC 26V to 10V requirements Power
4EA screws Machine negative
sync.
4EAbolts M ounting p-p :1.0V input Video 4)
2) Audio input Mounting bracket 1EA
1) 12V, 0.2A DC(output) Accessories Supplied:
Inputs 4-pin mini DIN jack Including mounting bracket
Black : Ground : 2Kg (4.4 Ibs) Weight Approx.
Green : Reverse gear 10V to 16V input Including projecting parts and controls
Power connector Red : Positive 10V to 26V input 7.0(W) X 5.0(H) X 7.8(D) Inch
Picture resolution 700 TV lines 176(W) X 127(H) X 196(D) mm
Picture image Factory preset to reverse image Dimensions
90 degree deflection angle -25 C to + 85 C (-13 F to +185 F)
5.5 inch picture measured diagonally Storage Temperature Range
Picture tube Black and White -15 C to + 50 C (+5 F to +122 F)
TV system CCIR Operating Temperature Range
PICK-UP DEVICE:
Imager
Picture elements
Image size
Optical & Other characteristics:
Lens
Synchronization
Horizontal resolution
Required illumination
Signal to noise ratio
Power supply
Power consumption
Operating temp.
Weight
5) Ground
* Design And Specifications Are Subject To Change Without Notice.