ESAB MEI 10 User manual

Brand: ESAB

Model: MEI 10

Category: Welding System

Type: User manual

ESAB MEI 10 wire feeder is a reliable and versatile tool designed to enhance your welding performance. With variable wire feed speed ranging from 0.1 to 1.0 m/min, it offers precise control for a wide range of welding applications. The feeder's robust construction and powerful motor ensure consistent wire feeding and smooth operation.

Valid for serial no. 022--xxx--xxxx0444 215 127 080828

MEI 10

104

Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè

-- 2 --

Rights reserved to alter specifications without notice.

Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.

Ðóññêèé 3...............................................

ENGLISH 9..............................................

Ðóññêèé

TOCr

-- 3 --

1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................

2 ÂÂÅÄÅÍÈÅ 6.......................................................

2.1 Äåðæà ò åëü áîëèíû 6.......................................................

3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ 6..........................................

4ÓÑÒÀÍÎÂÊÀ 7.......................................................

4.1 Óêàçàíèå êîäà èíñòðóìåíòà 7...............................................

4.2 Çàìåíà/ââîä ïðîâîëîêè 7..................................................

5ÐÀÁÎÒÀ 8...........................................................

6 ÎÁÑËÓÆÈÂÀÍÈÅ 8.................................................

6.1 ×èñòêà è çàìåíà 8.........................................................

7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 8.......................................

ÃÀÁÀÐÈÒÍÛÉ PÅÐÒÅÆ 16...............................................

ÑÕÅÌÀ 18..............................................................

ÍÎÌÅÐ ÇÀÊÀÇÀ 19.....................................................

dqa9d1ra -- 4 --

1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ

Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è

áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè

áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî

îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû

òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.

Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé

ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü

îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ

îáîðóäîâàíèÿ.

1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:

S èíñòðóêöèè ïî ýêñïëóàòàöèè

S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà

S íàçíà÷åíèå îáîðóäîâàíèÿ

S ïðàâèëà òåõíèêè áåçîïàñíîñòè

S òåõíîëîãèþ ñâàðêè

2. Îïåðàòîð îáåñïå÷èâàåò:

S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå

S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè

3. Ðàáî÷åå ìåñòî äîëæíî:

S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè

S íå èìåòü ñêâîçíÿêîâ

4. Ñðåäñòâà çàùèòû ïåðñîíàëà

S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,

íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.

S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,

øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè

âûçâàò ü îæîãè.

5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè

S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.

S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ

òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.

S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà

ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.

S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî

âðåìÿ ýêñïëóàòàöèè.

ÎÑÒÎÐÎÆÍÎ!

Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè

âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå

èíñòðóêöèè.

Âíèìàíèå!

Ýòî óñòðîéñòâî ïðåäíàçíà÷åíî èñê ëþ÷èòåëüíî äëÿ ýëåêòðîäóãîâîé ñâàðêè!

dqa9d1ra -- 5 --

ÎÑÒÎÐÎÆÍÎ!

Îáîðóäîâàíèå Class À íå ïðåäíàçíà÷å íî äëÿ èñïîëüçîâàíèÿ â

æèëûõ ïîìåùåíèÿõ, ãäå ýëåêòðîñíàáæåíèå îñóùåñòâëÿåòñÿ èç

áûòîâûõ ñåòåé íèçêîãî íàïðÿæåíèÿ. Â òàêèõ ìåñòàõ ìîãóò

ïîÿâèòüñÿ ïîòåíöèàëüíûå òðó äíîñòè îáåñïå÷åíèå

ýëåêòðîìàãíèòíîé ñîâìåñòèìîñòè îáîðóäîâàíèÿ Class À

âñëåäñòâèå êîíäóêòèâíûõ è ðàäèàöèîííûõ ïîìåõ.

Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è

ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ðàáîò.

dqa9d1ra -- 6 --

2 ÂÂÅÄÅÍÈÅ

Áëîê ïîäà÷è ïðîâîëîêè MEI 10 óñòàíàâëèâàåòñÿ íà óñòðîéñòâå ñâàðêè òðóá

PRB èëè PRC ôèðìû ESAB .

Áëîê ïîäà÷è ïðîâîëîêè ïîñòàâëÿåòñÿ íåñêîëüêèõ âàðèàíòîâ èñïîëíåíèÿ, ñì.

ñòð. 19 .

2.1 Äåðæàò åëü áîëèíû

Êîíñòðóêöèÿ äåðæàòåëÿ áîáèíû íà óñòðîéñòâå ïîçâîëÿåò îòêëîíÿòü åãî ê

ñåðåäèíå ïî òðóáå, ÷òîáû ñíèçèòü âíåøíèé âåñ èíñòðóìåíòà ïðè ñâàðêå.

Íà äåðæàòåëå áîáèíû èìååòñÿ äâà ïîëîæåíèÿ äëÿ ôèêñàöèè.

Ïðè ðàáî òå ñ ðàçìåðàìè 33-90 è 60-17 0, èìååò ñÿ ó÷àñòîê ïðåäâàðèòåëüíîé

óñòàíîâêè. Ïðè òàêîé óñòàíîâêå íåîáõîäèìî îòêðóòèòü áîëò (1).

3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ

MEI 10

Ïðîâîëîêà, äèàìåòð:

Ñòàëü

À ëþìèíèé

0,8 ìì

0,8 - 1,0 ìì

Ñêîðîñòü ïîäà÷è ïðîâîëîêè 0,1 - 1,0 ì/ìèí.

Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî +40˚C

åñ (áåç áîáèíû è êàáåëÿ)

0,5 êã

Äâèãàòåëü

Íîìèíàëüíîå íàïðÿæåíèå

íàÿ ïå

à÷à

159:1

Ìîìåíò ïåðåäà÷è

300 Íìì

Encoder 16 ïóëüñîâ/îáîðîò

Óðîâåíü øóìà 52 ÄÖá

dqa9d1ra -- 7 --

4ÓÑÒÀÍÎÂÊÀ

Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì

ñïåöèàëèñòîì.

ÅÄÓÏ

ÅÆÄÅÍÈÅ !

Âðàùàþùèåñÿ ÷àñòè ìîãóò ïðè÷èíèòü óâå÷üå, áóäüòå îñîáåííî

îñòîðîæíû.

4.1 Óêàçàíèå êîäà èíñòðóìåíòà

Âíèìàíèå! Ïóíêò 5.1 ïðèìåíÿåòñÿ òîëüêî äëÿ MEI 10, óñòàíîâëåííîãî íà

PRB/PRC âìåñòå ñ èñòî÷íèêàìè ïèòàíèÿ LTP è LTS.

Áëîê ïîäà÷è MEI 10 ðàáîòàåò â 2,9 ðàçà ìåäëåííåå åñëè

û âûáåðèòå êîä

èíñòðóìåíòà äëÿ PRB/PRC.

×òîáû ýòîãî íå ïðîèçîøëî, âûáåðèòå PRD/ñîîòâåò ñòâèå â ìåíþ “CHOOSE

CONNECTED TOOL”.

Â ïîä÷èíåííîì ìåíþ âûáåðèòå:

Ïðåäâàðèòåëüíûå äàííûå

√

PRB, PRC

Äëèíà âðàù åíèÿ PRB/PRC 17-49 36900

PRB/PRC 33-90 55350

PRB/PRC 60-170 93726

Ìàñøòàáíûé êîýôèöèåíò, ïîäà÷à ï ðîâîëîêè 79295

Áîëåå ïîäðîáíûå óêàçàíèÿ ïðèâåäåíû â Èíñòðîêöèè ïðîãðàììèðîâàíèÿ.

4.2 Çàìåíà/ââîä ïðîâîëîêè

Ïðè çàìåíå ïðîâîëîêè âûïîëíÿéòå ñëåäóþùèå óêàçàíèÿ.

S Îòêðóòèòå áîëò (1),

ûðîâíÿéòå íàïðàâëÿþùóþ (2).

S Îñâîáîäèòå äàâëåíèå ïðèæèìíîãî ðîëèêà (4) çàêðóòèâ ñòîïîðíûé âèíò

(3).

S Óñòàíîâèòå ãðà äóñû è ïîïðàâüòå êîíåö ïðîâîëîêè.

âåäèòå ðóêîé ï ðîâîëîêó.

S Ïîäêëþ÷èòå îïÿòü ïðèâîä ïðîâîëîêè è çà ò ÿíèòå áîëò (1).

S Îòïóñòèòå îáðàòíî ïðèæèìàþùèé ðîëèê ñòîïîðíûì âèíòîì (3).

dqa9d1ra -- 8 --

5ÐÀÁÎÒÀ

Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì

ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!

Íèæå â èíñòðóêöèè îïèñàíà ðàáîòà óñòðîéñòâà ñâàðêè òðóá PRB è PRC 17-170,

ñì. ñîî òâåòñòâóþùèå ðóêîâîäñòâà.

6 ÎÁÑËÓÆÈÂÀÍÈÅ

Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ

îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.

Ïðèìå÷àíèå:

Ã àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòå ëú

ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ

íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.

6.1 ×èñòêà è çàìåíà

Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé è íàäåæíîé ðàáîòû, âûïîëíÿéòå ïðèâåäåííûå

íèæå óêàçàíèÿ.

Äëÿ ÷èñòêè ó÷àñòêà âîêðóã êàòóøêè ïîäà÷è (1) èëè åå çàìåíû, ïðîèçâåäèòå ñëåäóþùåå:

S Ñíèìèòå äàâëåíèå íà ðîëèê ïðèæèìíîé ðîëèê (2), çàêðóòèâ ñòîïîðíûé

âèíò (3), è îòêðóòèâ áîëòû (4).

íèìàíèå! Ñëåäèòå çà äèñòàíöèîííûìè

ïðîêëàäêàìè (5).

S Ðàçååäèíèòå ÷àñòè ïðè çàìåíå íàïðàâëÿþùåé ï ðîâîëîêè, íèïïåëåé èëè

ìóíäøòóêà ïðîâîëîêè.

S Îòðåæüòå íàïðàâëÿþùóþ äî ñîîòâåòñòâóþùåé äëèíû íîæîì (íå

ïëîñêîã óáöàìè).

7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ

Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ì îíòàæó äîëæíû âûïîëíÿòüñÿ

êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .

Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé

ESAB.

Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà

ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).

ENGLISH

-- 9 --

TOCe

1 DIRECTIVE 10........................................................

2SAFETY 10...........................................................

3 INTRODUCTION 12...................................................

3.1 Bobbin holder 12.............................................................

4 TECHNICAL DATA 12.................................................

5 INSTALLATION 13....................................................

5.1 Indication of tool code 13......................................................

5.2 Changing/introducing supplementary wire 13.....................................

6 OPERATION 14.......................................................

7 MAINTENANCE 14....................................................

7.1 Cleaning and changing 14.....................................................

8 ORDERING SPARE PARTS 14..........................................

DIMENSION DRAWING 16................................................

DIAGRAM 18............................................................

ORDERING NUMBER 19.................................................

-- 1 0 --

dqa9d1ea

1DIRECTIVE

DECLARATION OF CONFORMITY

ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, declares that Wire feed unit MEI 10 from

serial number 022 (2000 week 22) onwards are constructed and tested in compliance with the stan-

dard EN 12100--2, in accordance with the requirements of directive (98/37/EEC) and standard EN

60974--10 (Class A) in accordance with the requirements of directive (2004/108/EEC).

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

Kent Eimbrodt

Global Director

Equipment and Automation

Laxå 2008--08--12

2SAFETY

Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who

works on or near the equipment observes all the relevant safety precautions. Safety precautions

must meet the requirements that apply to this type of welding equipment. The following recommen-

dations should be observed in addition to the standard regulations that apply to the workplace.

All work must be carried out by trained personnel well--acquainted with the operation of the welding

equipment. Incorrect operation of the equipment may lead to hazardous situations which can result

in injury to the operator and damage to the equipment.

1. Anyone who uses the welding equipment must be familiar with:

S its operation

S location of emergency stops

S its function

S relevant safety precautions

S welding

2. The operator must ensure that:

S no unauthorized person is stationed within the working area of the equipment when it is

started up.

S no--one is unprotected when the arc is struck

3. The workplace must:

S be suitable for the purpose

S be free from drafts

4. Personal safety equipment

S Always wear recommended personal safety equipment, such as safety glasses, flame--proof

clothing, safety gloves.

S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become

trapped or cause burns.

5. General precautions

S Make sure the return cable is connected securely.

S Work on high voltage equipment may only be carried out by a qualified electrician.

S Appropriate fire extinquishing equipment must be clearly marked and close at hand.

S Lubrication and maintenance must not be carried out on the equipment during operation.

-- 1 1 --

dqa9d1ea

WARNING

Read and understand the instruction manual before installing or operating.

Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.

Ask for your employer’s safety practices which should be based on manufacturers’ hazard data.

ELECTRIC SHOCK - Can kill

S Install and earth the welding unit in accordance with applicable standards.

S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

S Insulate yourself from earth and the workpiece.

S Ensure your working stance is safe.

FUMES AND GASES - Can be dangerous to health

S Keep your head out of the fumes.

S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone

and the general area.

ARC RAYS - Can injure eyes and burn skin.

S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

S Protect bystanders with suitable screens or curtains.

FIRE HAZARD

S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE - Excessive noise can damage hearing

S Protect y our ears. Use earmuffs or other hearing protection.

S Warn bystanders of the risk.

MALFUNCTION - Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

CAUTION!

Read and understand the instruction manual before

installing or operating.

CAUTION!

This product is solely intended for arc welding.

CAUTION!

Class A equipment is not intended for use in residential locations where

the electrical power is provided by the public low--voltage supply

system. There may be potential difficulties in ensuring electromagnic

compatibility of class A equipment in those locations, due to conducted

as well as radiated disturbances.

Do not dispose of electrical equipment together with normal waste!

In observance of European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment and its implementation in accordance with national law, electrical equipment

that has reached the end of its life must be collected separately and returned to an

environmentally compatible recycling facility. As the owner of the equipment, you should

get information on approved collection systems from our local representative.

By applying this European Directive you will improve the environment and human

health!

-- 1 2 --

dqa9d1ea

ESAB can provide yo u with all necessary welding protection an d accessories.

3 INTRODUCTION

The MEI 10 wire feed unit is fitted to ESAB’s PRB or PRC pipe welding tools.

The wire feed unit comes in several variants, see page 19.

3.1 Bobbin holder

The bobbin holder on the tool is designed so that it is angled towards the centre of

the pipe in order to minimise the tool’s external dimensions when welding.

The bobbin holder has two stop locations.

When using sizes 33--90 and 60--170, there is an area for rough adjustment. The

screw (1) must be loosened when adjusting this.

4 TECHNICAL DATA

MEI 10

Supplementary wire ∅:

Steel

Aluminium

0.8 mm

0.8--1.0 mm

Feeding wheel speed 0.1--1.0 m/min

Operating temperature -- 1 0 t o + 4 0 ˚C

Weight (without wire drum and cable) 0.5 kg

Motor

Nominal voltage

Ratio

Ratio moment

24 V DC

159:1

300 Nmm

Encoder 16 pulser/r

Continuous balanced acoustic pressure 52 dB

-- 1 3 --

dqa9d1ea

5 I NSTALLATION

The installatio n must be executed by a professional.

WARNING!

Rotating parts can cause injury, take great care.

5.1 Indication of tool code

Note! Chapter 5.1 only applies to MEI 10 installed on PRB/PRC together with power

sources LTP and LT S.

The MEI 10 feeding mechanism operates 2.9 times too slowly if the tool code for

PRB/PRC is chosen.

In order to avoid this, select PRD/adjust in the CHOOSE CONNECTED TOOL menu.

In the sub--menu, choose:

Pre--installed

√

PRB, PRC

Rotation length PRB/PRC 17--49 36900

PRB/PRC 33--90 55350

PRB/PRC 60--170 93726

Scaling factor, feeding wheel 79295

For further instructions, see the programming manual.

5.2 Changing/introducing supplementary wire

Follow the instructions below when changing wire.

S Loosen the screw (1).

S Straighten the wire guide (2).

S Loosen the press roller (4) by tightening the stop screw (3).

S File off burrs and straighten the end of the supplementary wire.

S Feed the supplementary wire in by hand.

S Reattach the wire guide and tighten the screw (1).

S Tighten the press roller again using the stop screw (3).

-- 1 4 --

dqa9d1ea

6 OPERATION

General safety regulations for the handling of the equipment can be found on

page 10. Read through before you start using the equipment!

For operation of the PRB and PRC 17--170 pipe welding tools, see respective

manuals.

7 MAINTENANCE

Regular maintenance is important for safe, reliable operation.

CAUTION!

All guarantee undertakings from the supplier cease to apply if the customer himself

attempts any work in the product during the guarantee period in order to rectify any faults.

7.1 Cleaning and changing

Follow the instructions below for reliable and safe operation.

In order to clean the space around the feeding wheel (1) or to replace it.

S Loosen the press roller (2) by tightening the stop screw (3) and removing the

screws (4). NB! Keep an eye on the spacers (5).

S Unscrew the parts when changing the wire guides, nipples or wire nozzle.

S Cut the wire guide to a suitable length using a knife (not pliers).

8 ORDERING SPARE PARTS

MEI 10 is designed and tested in accordance with the international and European stan-

dards EN 12100--2 and EN 60974--10. It is the obligation of the service unit which has

carried out the service or repair work to make sure that the product still conforms to

the said standard.

Repair and electrical work should be performed by an authorized ESAB serviceman.

Use only ESAB original spare and wear parts.

Spare parts may be ordered through your nearest ESAB dealer, see the last page of

this publication.

-- 1 5 --

Dimension drawing Ãà áà ð è ò í û é P å ðòåæ

-- 1 6 --

dqa9m11a

PRB 17--49/ PRC 17--49

PRB 33--90/ PRC 33--90

R = D/2+65 if D > 80

R = 104 if D < 80

-- 1 7 --

dqa9m11a

PRB 60--170/ PRC 60--170

PRB 17--49/ PRB 33--90/ PRB 60--170/ PRC 17--49/ PRC 33--90/ PRC 60--170

Diagram Ñõåìà

-- 1 8 --

dqa9e11a

MEI 10

Edition 080828

Ordering number Íîìåð çàêàçà

-- 1 9 --

dqa9o11a

Ordering no. Denomination Type

0444 211 880 Wire feed unit MEI 10 for PRB 17--49, PRC 17--49 with AVC*

0444 212 880 Wire feed unit MEI 10 for PRB 33--90, PRC 33--90 with AVC*

PRC 33--90 with AVC* and weaving

0444 213 880 Wire feed unit MEI 10 for PRB 60--170, PRC 60--170 with AVC*

PRC 60--170 with AVC* and weaving

0444 215 990 Spare parts list

AVC* Automatic arc length regulation with the aid of arc voltage.

Instruction manuals and the spare parts list are available on the Internet at www.esab.com

-- 2 0 --

backpage

ESAB MEI 10 User manual

Brand: ESAB

Model: MEI 10

Category: Welding System

Type: User manual

Download PDF

report

ESAB MEI 10 User manual

ESAB MEI 10 User manual

Related papers

Other documents