Crestron TST-602 User guide

TST-602

5.7" Wireless Touch Screen

Supplemental Guide

Crestron Electronics, Inc.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive,

non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron

website at www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, and Rava are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or

other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other

trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors

in typography or photography.

This document was written by the Technical Publications department at Crestron.

Supplemental Guide – DOC. 7688A Contents

•

i

Contents

Access the Setup Screens 1

Configure the TST-602 2

RF Setup ................................................................................................................. 2

Audio Setup ............................................................................................................ 3

Display Setup .......................................................................................................... 4

Standby Timeout ..................................................................................................... 6

Networking Setup ................................................................................................... 7

LAN Setup ................................................................................................. 8

WiFi Setup ............................................................................................... 10

Diagnostics ........................................................................................................... 13

Keypad Test ............................................................................................. 14

Touch Test ............................................................................................... 15

Mic Test ................................................................................................... 15

LAN Test .................................................................................................. 16

WiFi Test .................................................................................................. 17

RF Test .................................................................................................... 18

Test Patterns............................................................................................ 19

Rava Test ................................................................................................. 20

RTSP Test ................................................................................................ 21

Battery Diagnostics .................................................................................. 22

Dock Test ................................................................................................ 23

Suspend Test ........................................................................................... 23

About .................................................................................................................... 24

Save & Edit ........................................................................................................... 24

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

1

TST-602: 5.7" Wireless Touch Screen

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the Crestron

®

TST-602. If no project is loaded, tap the screen to access the main setup screen. If a

project is running, the main setup screen can be accessed by pressing

HOME

,

MEDIA

, ,

and  (to the left of the touch screen display) in sequence twice (press

HOME

,

MEDIA

, ,

,

HOME

,

MEDIA

, , ) within a 5-second period.

The

TST-602 Setup

screen is displayed.

TST-602 Setup Screen

The

TST-602 Setup

screen is composed of buttons for RF setup, audio setup, display

setup, standby timeout, networking setup, and diagnostics. In addition, there is a button to

toggle system messages on or off, an

About

button that provides information about the

touch screen, and a

Save & Exit

button. The functions of each are detailed in the following

pages of this guide.

2

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

Configure the TST-602

RF Setup

On the

TST-602 Setup

screen, tap

RF Setup

to display the

RF Setup

screen.

RF Setup Screen

The

RF Setup

screen shows RF signal strength, gateway UID, and gateway name. It also

has controls for acquiring the TST-602, setting the RF ID, RF channel, and RF power,

enabling RF roaming, and selecting the series of the control system.

Before a TST-602 can be used with a Crestron control system, it must first be acquired by a

Crestron Extended Range (RF) Wireless gateway (sold separately). To acquire a TST-602,

perform the following procedure:

1. Use a stylus or other thin-tipped object to press

ACQUIRE

on the gateway to enter

Acquire mode. The accompanying LED illuminates, indicating the unit is ready to

link with the touch screen.

2. On the TST-602’s

RF Setup

screen, tap

Acquire

. The screen displays an “Acquire

in progress” message, and the TST-602 is automatically acquired by the gateway

within two minutes.

3. When the screen displays an “Acquire OK” message, press

ACQUIRE

on the

gateway to exit Acquire mode. The LED turns off.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

3

RF Setup – Acquire OK

For installations with multiple gateways, the TST-602 can be set up for RF roaming. For

details, refer to Touch Screen RF Roaming (Doc. 7671) at www.crestron.com/manuals

.

Tap to return to the

TST-602 Setup

screen.

Audio Setup

On the

TST-602 Setup

screen, tap

Audio Setup

to display the

Audio Setup

screen.

Audio Setup Screen

4

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

The

Audio Setup

screen provides controls for muting or unmuting the audio, and for

adjusting levels for the master volume, media volume, and beep volume. The

Media

Volume

controls adjust the H.264 streaming media level in relation to the

Master Volume

controls.

Tap to return to the

TST-602 Setup

screen.

Display Setup

On the

TST-602 Setup

screen, tap

Display Setup

to enter the

Display Setup

screen.

Display Setup Screen

The

Display Setup

screen provides controls to adjust the screen’s LCD brightness and key

backlight brightness, controls to toggle the hard key backlight on and off, and controls to

enable using a hard key to wake the LCD.

Tap

High, Med, & Low Settings

to display the

Display Setup - High, Med, & Low

Settings

screen.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

5

Display Setup - High, Med, & Low Settings Screen

This screen provides access to

Low

,

Med

, and

High

presets for the screen and the key

backlight, in addition to custom adjustment for each of these.

Tap to return to the

Display Setup

screen.

Tap again to return to the

TST-602 Setup

screen.

6

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

Standby Timeout

On the

TST-602 Setup

screen, tap

Standby Timeout

to display the

Standby Timeout

screen.

Standby Timeout Screen

The

Standby Timeout

screen provides controls to adjust standby timeout and power down

for an undocked TST-602, and standby timeout for a docked TST-602. Standby timeouts

can be from 0 to 120 seconds. Power down can be from 0 to 240 seconds.

Tap

Screen Saver Options

to display the

Standby - Screen Saver

screen.

Standby - Screen Saver Screen

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

7

The

Standby - Screen Saver

screen provides controls to turn the digital clock screen saver

on and off, as well as controls to display the time in a 24-hour format and to adjust the

screen saver brightness.

Tap to return to the

Standby Timeout

screen.

Tap again to return to the

TST-602 Setup

screen.

Networking Setup

On the

TST-602 Setup

screen, tap

Networking Setup

to display the

Networking Setup -

Choose WiFi or LAN

screen.

Networking Setup - Choose WiFi or LAN Screen

The

Networking Setup - Choose WiFi or LAN

screen provides controls for enabling the

Wi-Fi

®

or LAN access. The following paragraphs pertain to LAN setup. For Wi-Fi setup, refer

to page 10.

8

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

LAN Setup

For LAN, tap

LAN Setup

on the

Networking Setup - Choose WiFi or LAN

screen to

display the

Ethernet Setup

screen.

Ethernet Setup Screen

The

Ethernet Setup

screen displays current settings, and provides controls for toggling

DHCP on and off.

The TST-602 ships with DHCP enabled by default. To enter static IP settings, use the

following procedure:

1. On the

Ethernet Setup

screen, tap

Off

under

DHCP Enabled

, and then tap

Set

Static IP Address Settings

to display the

Ethernet Setup - Static IPs

screen.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

9

Ethernet Setup - Static IPs Screen

2. Use the

Ethernet Setup - Static IPs

screen to edit the static IP address, static

subnet mask, static default router, preferred DNS, and alternate preferred DNS.

Tap each field to display a keypad for entering the new setting.

3. Tap

Apply Changes

to save the new settings.

Tap to return to the

Networking Setup - Choose WiFi or LAN

screen.

Tap again to return to the

TST-602 Setup

screen.

10

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

WiFi Setup

For Wi-Fi, tap

WiFi Setup

on the

Networking Setup - Choose WiFi or LAN

screen to

display the

WiFi Setup

screen.

WiFi Setup Screen

The

WiFi Setup

screen displays current settings and provides controls for toggling DHCP

on and off, and for selecting and managing access points.

To enter Wi-Fi settings, use the following procedure:

1. If using a static IP address, tap

Off

under

DHCP Enabled

, and then tap

Set Static

IP Address Settings

to display the

WiFi Setup - Static IPs

screen. If using DHCP,

skip to step 4 to connect to a Wi-Fi access point.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

11

WiFi Setup - Static IPs

2. Use the

WiFi Setup - Static IPs

screen to edit the static IP address, static subnet

mask, static default router, preferred DNS, and alternate preferred DNS. Tap each

field to display a keypad for entering the new setting.

3. Tap to return to the

WiFi Setup

screen. Then tap

Apply Changes

. (Refer

to the image of the

WiFi Setup

screen on the previous page.)

4. On the

WiFi Setup

screen, tap

Select a WiFi Access Point

to display the

Connect

to a WiFi Access Point: 1-2-3

screen.

Connect to a WiFi Access Point: 1-2-3 Screen

12

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

5. Choose from the list of available access points displayed on the left side of the

screen. Once selected, the name and security type for the selected access point

are displayed on the right side of the screen.

Connect to a WiFi Access Point: 1-2-3 Screen

6. Tap the

Password

field to display a keyboard and then enter the password. Once a

password is entered, tap

Save

.

7. Tap

Step 3 - Make this my Access Point

.

Tap to return to the

Networking Setup - Choose WiFi or LAN

screen.

Tap again to return to the

TST-602 Setup

screen.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

13

Diagnostics

On the

TST-602 Setup

screen, tap

Diagnostics

to display the

Diagnostics

screen.

Diagnostics Screen

The

Diagnostics

screen displays the CPU temperature and the available memory, and it

provides controls to open various test screens. These are explained in the sections that

follow.

14

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

Keypad Test

On the

Diagnostics

screen, tap

Keypad Test

to display the

Diagnostics - Keypad Test

screen.

Diagnostics - Keypad Test Screen

The

Diagnostics - Keypad Test

screen can be used to test the function of the hard keys.

When a hard key is pressed, its corresponding indicator on the screen lights.

Tap to return to the

Diagnostics

screen.

Supplemental Guide – DOC. 7688A TST-602: 5.7˝ Wireless Touch Screen

•

15

Touch Test

On the

Diagnostics

screen, tap

Touch Test

to display the touch test screen.

Touch Test Screen

The touch test screen can be used to test the function of the screen. When a location

button is tapped, its indicator on the screen lights.

Tap to return to the

Diagnostics

screen.

Mic Test

On the

Diagnostics

menu, tap

Mic Test

to begin a microphone test.

The built-in microphone (located above the touch screen display) records your voice for five

seconds and plays it back to confirm the microphone is functioning. When playback is

finished, the display returns to the

Diagnostics

screen.

16

•

TST-602: 5.7˝ Wireless Touch Screen Supplemental Guide – DOC. 7688A

LAN Test

On the

Diagnostics

screen, tap

LAN Test

to display the

Diagnostics - LAN

screen.

Diagnostics - LAN Screen

The

Diagnostics - LAN

screen displays current settings. This screen also contains a Link

indicator to show the status of the Ethernet connection, and controls to test the connection

to the default router.

Tap to return to the

Diagnostics

screen.

Page is loading ...

Crestron TST-602 User guide

Crestron TST-602 User guide

Related papers

Other documents