Aaeon EMB-BT1 User manual

Industrial Motherboard

EMB-BT1

ii

E15781

Revised Edition V8

August 2019

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

®

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

®

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1: Product overview

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.5 System memory ........................................................................... 2-6

2.5.1 Installing a DIMM ............................................................ 2-7

2.6 Jumpers ........................................................................................ 2-8

2.7 Onboard LEDs ............................................................................ 2-11

2.8 Connectors ................................................................................. 2-12

2.8.1 Rear panel connectors .................................................. 2-12

2.8.2 Internal connectors ....................................................... 2-14

Chapter 3: BIOS setup

3.1 BIOS setup .................................................................................... 3-1

3.1.1 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 Power Management ........................................................ 3-3

3.3.2 CPUConguration .......................................................... 3-4

3.3.3 SuperIOConguration ................................................... 3-4

3.3.4 Dynamic Digital IO .......................................................... 3-5

3.3.5 Trusting Computing ......................................................... 3-5

3.3.6 USBConguration .......................................................... 3-5

3.3.7 Hardware Monitor ........................................................... 3-6

3.3.8 IDEConguration ............................................................ 3-7

iv

3.4 Chipset menu ............................................................................... 3-8

3.4.1 NorthBridgeConguration ............................................. 3-8

3.4.2 SouthBridgeConguration ............................................. 3-8

3.5 Security menu .............................................................................. 3-9

3.5.1 Administrator Password .................................................. 3-9

3.5.2 User Password ................................................................ 3-9

3.6 Boot menu .................................................................................. 3-10

BootConguration ....................................................................... 3-10

3.7 Save & Exit menu ....................................................................... 3-11

Appendix

Notices .......................................................................................................A-1

Contents

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA Cable

1 x I/O Shield

1 x Support CD

1 x SATA power cable

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel

®

J1900 / N2807 / E3845 / E3825

• Two DDR3L SO-DIMMs for J1900/E3845

• One DDR3L SO-DIMM for N2807/E3825

• SATA 6.0 Gb/s x 2, SATA 3.0 Gb/s x 2 (1 colay with mSATA), USB3.0 x 1,

USB2.0 x 7

• PCI-Express x 1, Full-size Mini Card (mSATA) (SIM card slot & PCIe optional)

x 1, Half-size Mini Card (PCIe + USB) x 1

• VGA, HDMI, 18/24-bit Dual Channel LVDS support

Chapter 1

Product overview

EMB-BT1

1-2

1.3 Specifications

SYSTEM

Form factor

Mini-ITX

CPU

Intel® J1900 Bay Trail-D (4C @ 2GHz CPU, 10W TDP)

Intel® E3845 Bay Trail-I (4C @ 1.91GHz CPU, 10W TDP)

Intel® E3825 Bay Trail-I (2C @ 1.33GHz CPU, 6W TDP)

Intel® N2807 Bay Trail-M (2C @ 1.58GHz CPU, 4.3W TDP)

Memory

DDR3L 1333 MHz SO-DIMM x 2 up to 8GB (J1900 / E3845)

DDR3L 1333 MHz SO-DIMM x 1 up to 4GB (N2807)

DDR3L 1067 MHz SO-DIMM x 1 up to 8GB (E3825)

Non-ECC, unbuffered memory, dual-channel memory architecture

attype

I/O Chipset

Fintek F81866D

Ethernet

2 x Realtek PCIe Gb LAN 8111G

BIOS

64Mbit Flash AMI BIOS ROM

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

H/W Monitor

Temperature Monitor on CPU/System

Voltage Monitor on Vcore/5V/3.3V/12V

Fan Monitor on CPU/Chassis

Smart Fan Control

Chassis Fan (fanless)

Power State

S3, S4, S5

Expansion slot

1 x PCIe [x1]

1 x Mini Card (mSATA) Full-size (SIM card slot & PCIe optional)

1 x Mini Card (PCIe + USB) Half size

TPM

InneonSLB9635TT1.2(optional)

Battery

Lithium battery

Power requirement

12V DC

Board size

6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

Gross weight

1.1 lb (0.5 Kg)

Operating

temperature

32

o

F~140

o

F (0

o

C~60

o

C)

Storage temperature

-40

o

F~185

o

F (-40

o

C~85

o

C)

Operating humidity

0%~90% relative humidity, non-condensing

Power compliance

Compliant with Eup/ErP

Certificate

CE/FCC Class A

(continued on the next page)

1-3

Chapter 1: General information

DISPLAY

Chipset

Intel® HD Graphics

Resolution

Up to 1920x1200@60Hz for VGA

Up to 1920x1200@60Hz for HDMI

Up to 1920x1080@60Hz, Dual Channel 18/24-bit LVDS

Output interface

1 x LVDS

1 x VGA

1 x HDMI

I/O

Storage

2 x SATA 6.0Gb/s ports

2 x SATA 3.0Gb/s ports (1 colay with mSATA)

1 x SATA power connector

Serial port

1 x RS-232/422/485 supports 5V/12V/RI option (COM1 for box

header)

5 x RS-232 (COM2 on rear I/O, COM3-COM6 for box header)

USB

1 x USB3.0 (1 port at rear panel)

7 x USB2.0 (2 ports at rear panel, 5 ports at mid-board)

Fan

1 x Chassis Fan connector (4-pin)

RTC

Internal RTC

Keyboard/Mouse

1 x PS/2 Keyboard / mouse port

Audio

Mic-in

Line-out

Ethernet

2 x RJ-45 ports on rear I/O

Display

1 x VGA port on rear I/O

1 x HDMI port on rear I/O

1 x LVDS port on rear I/O

Others

1 x 8-bit Programmable Digital I/O

1 x Front panel connector

1 x AT/ATX mode select jumper (optional)

EMB-BT1

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply.Failuretodosomaycauseseveredamagetothemotherboard,

peripherals,orcomponents.

EMB-BT1

2-2

EATX_PWR1

ALC

887

AAFP1

LVDS1

Super

I/O

MINI_CARD1

CLRTC1

J1

17.0cm(6.7in)

DDR3_DIMM_A1 (64bit, 240-pin module)

DDR3_DIMM_B1 (64bit, 240-pin module)

DC_PWR1

USBHUB_12

USB3_1

AUDIO1

LAN1

LAN2

HDMI1

F_PANEL

J4

J3

J2

LED1

LED2

BZ1

USBHUB_56

USBHUB_7

USBHUB_34

CHA_FAN1

SIM1

SATA_PWR1

SATA3G_1 SATA6G_1

SATA3G_2

SATA6G_2

COM5COM6

COM3

COM1

COM4

SPI1

64Mb

BIOS

APU

PCIEX1_1

INV1

CHRONTEL

CH7511

ASM

1442

RTL

8111G

RTL

8111G

VGA1

COM2

ASM

1661

MINI_CARD2

LPT1

KBMS1

BATTERY1

651 2

12

13

9

11

10

7

9

8

19 17 15182021

5

24

22

14

43

16

23

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots

Page

1.

12VDCconnector(4-pinEATX_PWR1) 2-14

2.

USB2.0connector(10-1pinUSBHUB_34,USBHUB_56andUSBHUB_7) 2-19

3.

CPU 2-6

4.

SO-DIMMmemoryslots 2-6

5.

StandbyPowerLED(SB_PWR_LED1,SB_PWR_LED2) 2-11

6.

Chassisfanconnectors(4-pinCHA_FAN) 2-15

7.

COM1Ring/+5V/+12Vselection(6-pinJ1) 2-9

8.

SATApowerconnector(SATA_PWR1) 2-17

9.

Minicardconnectors(MINI_CARD1,MINI_CARD2) 2-19

10.

SerialATA6.0Gb/sconnectors(7-pinSATA6G_1,SATA6G_2) 2-17

11.

SerialATA3.0Gb/sconnectors(7-pinSATA3G_1,SATA3G_2) 2-22

12.

DigitalI/Oconnector(DIO1) 2-22

13.

Systempanelconnector(10-1pinF_PANEL) 2-16

14.

ClearRTCRAM(CLRTC) 2-8

15.

Serialportconnectors(10-1pinCOM1,COM3~6) 2-21

16.

PS/2keyboardandmouseconnector(KBMS1) 2-20

17.

LPTconnector(26-1pinLPT1) 2-20

18.

Backlightinverterpowerconnector(5-pinINV1) 2-18

19.

LVDSpanelvoltageselection(3-pinJ4) 2-10

20.

LVDSconnector(30-pinLVDS1) 2-18

21. Inverterbacklightcontrolofinverterselector(3-pinJ3) 2-10

22. Frontpanelaudioconnector(10-1pinAAFP) 2-15

23. Invertervoltageselection(3-pinJ2) 2-9

24. BIOSprogrammableconnector(8-pinSPI) 2-20

EMB-BT1

2-4

2.3 Screw size

2.3.1 Component side

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

EMB-BT1

2-6

2.4 Central Processing Unit (CPU)

ThismotherboardcomeswithanIntel®J1900/E3845/E3825/N2807processor.

EMB-BT1 CPU

CPU

2.5 System memory

EMB-BT1 204-pin DDR3L SO-DIMM sockets

DIMM_B1

DIMM_A1

ThismotherboardcomeswithtwoDoubleDataRate3LowVoltage(DD3L)Small

OutlineDualInlineMemoryModules(SO-DIMM)socket.Thegureillustratesthe

locationoftheDDR3LDIMMsocket:

NOTE:UsetheSO-DIMM_A1slotwheninsertingonlyoneSO-DIMM.

2-7

Chapter 2: Motherboard information

2.5.1 Installing a DIMM

To install a SO-DIMM

To remove a SO-DIMM

3

2

3

2

EMB-BT1

2-8

2.6 Jumpers

1. Clear RTC RAM (CLRTC)

ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMinCMOS.

YoucancleartheCMOSmemoryofsystemsetupparametersbyerasing

theCMOSRTCRAMdata.TheonboardbuttoncellbatterypowerstheRAM

datainCMOS,whichincludesystemsetupinformationsuchassystem

passwords.

To erase the RTC RAM:

1. TurnOFFthecomputerandunplugthepowercord.

2. Movethejumpercapfrompins1-2(default)topins2-3.Keepthecapon

pins2-3forabout5~10seconds,thenmovethecapbacktopins1-2.

3. PlugthepowercordandturnONthecomputer.

4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetup

to reenter data.

CAUTION!ExceptwhenclearingtheRTCRAM,neverremovethecapon

CLRTCjumperdefaultposition.Removingthecapwillcausesystemboot

failure!

NOTES:

• Ifthestepsabovedonothelp,removetheonboardbatteryandmovethe

jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,

reinstall the battery.

• YoudonotneedtocleartheRTCwhenthesystemhangsdueto

overclocking.Forsystemfailureduetooverclocking,usetheCPU

ParameterRecall(C.P.R)feature.Shutdownandrebootthesystemsothe

BIOScanautomaticallyresetparametersettingstodefaultvalues.

EMB-BT1 Clear RTC RAM

1 2

2 3

Normal

(Default)

Clear RTC1

CLRTC

2-9

Chapter 2: Motherboard information

EMB-BT1 COM2 Ring/+5V/+12V Selection

1

2

3

4

5

6

+12V

+5VRing

(Default)

J1

EMB-BT1 Inverter Voltage Selection

1 2 2 3

+5V

(Default)

+12V

J2

2. COM1 Ring/+5V/+12V selector (6-pin J1)

3. Inverter voltage selection (3-pin J2)

Setting Pins

+12V 1-2

+5V 3-4

Ring(Default) 5-6

Setting Pins

+12V 1-2

+5V(Default) 2-3

EMB-BT1

2-10

EMB-BT1 LVDS Panel Voltage Selection

1 2 2 3

+3V

(Default)

+5V

J4

Setting Pins

+5V

1-2

+3V(Default) 2-3

5. LVDS panel voltage selection (3-pin J4)

EMB-BT1 Mode Selection for Back

Light Control of Inverter

PWM CTLDC CTL

(Default)

1 2 2 3

J3

4. Inverter Backlight Control of Inverter selector (3-pin J3)

Setting Pins

DCVoltageControl(Default)

1-2

PWMControl

2-3

2-11

Chapter 2: Motherboard information

EMB-BT1 Onboard LEDs

LED1

ON

Main Power

Main Power Off

OFF

LED2

ON

Standby Power

Powered Off

OFF

1. Standby Power LEDs

ThemotherboardcomeswithastandbypowerLEDthatlightsuptoindicate

thatthesystemisON,insleepmode,orinsoft-offmode.Thisisareminder

that you should shut down the system and unplug the power cable before

removingorplugginginanymotherboardcomponent.Theillustrationbelow

showsthelocationoftheonboardLED.

2.7 Onboard LEDs

EMB-BT1

2-12

2.8 Connectors

2.8.1 Rear panel connectors

7

8

6543

21

1. DC power connector.Insertthepoweradapterintothisport.

2. USB 2.0 ports.Thesetwo4-pinUniversalSerialBus(USB)portsare

availableforconnectingUSB2.0/1.1devices.

NOTE:BeforeyouinstallWindows7operatingsystem,gotoBIOSSetup>

Advanced>XHCImode[Disabled],USB2.0(EHCI)support[Enabled],andset

thembackwhenyounishinstallingtheoperatingsystem..

3. USB 3.0 ports.Thesetwo9-pinUniversalSerialBus(USB)portsconnectto

USB3.0/2.0devices.

NOTES:

• DONOTconnectakeyboard/mousetoanyUSB3.0portwheninstalling

Windows

®

operating system.

• DuetoUSB3.0controllerlimitation,USB3.0devicescanonlybeused

underWindows

®

OSenvironmentandaftertheUSB3.0driverinstallation.

• USB3.0devicescanbeusedfordatastorageonly.

• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0

portsforafasterandbetterperformancefromyourUSB3.0devices.

4. LAN1~2 (RJ-45) ports.TheseportsallowGigabitconnectiontoaLocalArea

Network(LAN)throughanetworkhub.RefertothetablebelowfortheLAN2

portLEDindications.

LAN port LED indications

Page is loading ...

Aaeon EMB-BT1 User manual

Aaeon EMB-BT1 User manual

Related papers

Other documents