CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE: THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed on built-up decks or on
finished surfaces up to 1-1/2" (38mm) thick.
• The tub fill spout is a slip fit design and the supplies
are 1/2" copper tubing.
OPERATION
• Acrylic knob style handles
• Rotate either handle counterclockwise to open
(clockwise to close).
FLOW
• Designed to deliver 18 gpm (68 L/min).
CARTRIDGE
• Nonmetallic and stainless steel materials
STANDARDS
• Designed and manufactured to comply with the applicable
requirements of: CSA B-125 and ASME A112.18.1M and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
SPOUT POST
INSTALLS THRU
7/8" (22mm) MINIMUM
DIAMETER HOLE
ESCUTCHEON
2-1/4" (mm)
1-1/2"
(38mm)MAX.
MOUNTING NUT
1/2"
COPPER
TUBING
1/2" COPPER
TEE
SPOUT POST
WASHER
VALVE BODY
INSTALLS THRU
1-3/16" MINIMUM
DIAMETER HOLE
INLET
1/2" COPPER
TUBE SHANK
MOUNTING
NUT
BRACKET
1/2" COPPER TEE
3"
(77mm)
5"
(127mm)
4-1/2"
(115mm)
7"
(179mm)
CHATEAU®
Two-Handle Garden Tub Valve and Trim
Model: 74942 series
Discontinued Model: 74943
Rev. 4/08
-
1
Moen 74942 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
The Plumber's Choice 0150CCLN-5 Installation guide
-
American Standard T975.500.295 User manual
-
-
-
-
-
-
-
-