VMG8924-B10D

ZyXEL VMG8924-B10D, VMG8924-B30D Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ZyXEL VMG8924-B10D Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
VMG8924-B10D/VMG8924-B30D
Dual Band Wireless AC/N VDSL2 VoIP
Combo WAN Gigabit IAD
ENGLISH
Use an Ethernet cable to connect the WAN port to a
gateway modem (1-a).
OR
Use the gray phone cable to connect the DSL port to a
DSL splitter (1-b) or directly to the telephone wall outlet.
Check the LEDs.
INTERNET LED (5-a)
ON - The Internet is ready. Go to Wireless Setup.
OFF - The Internet is not ready. Go to Internet Setup.
PHONE LED (5-b)
ON - The VoIP registration is complete.
OFF - The VoIP registration is not complete. Configure VoIP
settings.
EN
1
Configuring Your VMG8924-B10D/VMG8924-B30D
Open a web brower and go to http://192.168.1.1
Enter the default User Name (admin) and Password (1234), and
then click Login.
Connect a computer to the LAN port using the yellow
Ethernet cable.
Connect a phone to the phone port using the phone cable.
Connect the power cable to the modem and press the power
button.
EN
2
3
4
EN
5
VMG8924-B10D/VMG8924-B30D
User Name
Password 1234
admin
1
Hardware Connections
LAN PHONE1
Internet Setup
Login
User Name : admin
Password : 1234
(default)
http://192.168.1.1
POWER
POWER ON
3 4
1
5
WAN
1-a
DSL
OR
INTERNET
ON
INTERNET
OFF
PHONE1
OFF
PHONE1
ON
1-b
2
ON/OFF
5-a 5-b
1/2
Quick Start Guide
ENGLISH
1
2
1
2
Mark two holes on the wall at the distance of 82mm. Insert the
screw anchors and screws to fasten the bracket.
Attach your VMG8924-B10D/VMG8924-B30D to the bracket
fastened on the wall.
Make sure the screws are fastened well enough to hold the
weight of your VMG8924-B10D/VMG8924-B30D.
WPS ON
3
Wireless Setup
WPS
Press the WPS button until the WiFi 2.4G and 5G LEDs light
up in orange.
Press the WPS button on the client.
No WPS
The SSID and Wireless key are on the device sticker.
Find the device with this SSID. Enter the Wireless key to
connect.
1
2
3
Connect the stand carefully as shown.
Place the device vertically on a smooth level surface.
1
2
WiFi 2.4G
ON
WiFi 5G
ON
/ WPS
Wireless Setup
/ NO WPS
1
1
2
2
More than 5 seconds.
within
minutes
2
5 seconds
WPS
Wi-Fi Setting
SSID (2.4GHz)
SSID (5-GHz)
Wireless key
Zyxel_xxxx
Zyxel_xxxx_5G
XXXXXXXXXX
Desktop Installation
x2x2
SSID (2.4GHz)
Wireless key
XXXXXXXXXX
Zyxel_xxxx
1
Wall Mounting
2
1
2
82mm
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
2/2
VMG8924-B10D/VMG8924-B30D
Dual Band Wireless AC/N VDSL2 VoIP
Combo WAN Gigabit IAD
/