ZyXEL PMG5318-B20B Quick start guide

Brand: ZyXEL

Model: PMG5318-B20B

Type: Quick start guide

1/2

EU Importer: ZyXEL Communication A/S, Generatorvej 8D, 2860 Søborg, Denmark. http://www.zyxel.dk

US Importer: ZyXEL Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001. http://www.us.zyxel.com

Internet Setup

IP Address: 192.168.1.1

Username: admin

Password: 1234

Hardware Connections

Connect the power and press the power

button.

PON

GREEN

PON

ORANGE

PON

RED

PON not connected. Turn off, disconnect power,

and repeat hardware connection steps.

PON connected and registered.

Connect a computer using an Ethernet cable.

PON connected but not registered.

Connect the fiber optic cable from your service

provider's network to the PON port.

Warning! To avoid possible eye injury, do NOT

look into an operating fiber-optic module's

connector.

Point the antennas up.

VoIP registration failed.

VoIP registration is complete.

PHONE1

VoIP setting is not properly configured. Go to

the Web Configurator and configure VoIP

settings.

OFF

PHONE1

GREEN

RED

Connect a phone.

PHONE1

Make sure the LEDs are on and check the

PON and PHONE LEDs.

Quick Start Guide

PMG5318-B20B

Wireless N GPON HGU with 4-port GbE Switch

2/2

See the User's Guide at www.zyxel.com for more information.

17 3. 2m m

Wall Mounting

2 3

Wireless

WPS

No WPS

Minutes

(Within 2 Minutes)

SSID

Wireless key

(In 1 second...)

(5 seconds)

Wi-Fi 2.4G

(>5 seconds)

Press the WPS button until the WLAN

LED flashes in orange.

Press the WPS button on the client.

The SSID and wireless key are on the device's

bottom sticker.

Find the device with its SSID. Enter wireless

key to connect.

Advanced Setup > Layer2 Interface > GPON Interface

ORANGE

ZyXEL PMG5318-B20B Quick start guide

ZyXEL PMG5318-B20B Quick start guide

ZyXEL PMG5318-B20B Quick start guide

Related papers

Other documents