Channel Vision A0129 is a keypad controller that can be used with Channel Vision's A0350, WA-350, and WA-351 audio and video devices. It features volume up and down buttons, a power button, and a mute button, allowing you to easily control the audio and video output of your connected devices. The keypad also includes an IR receiver, which allows you to use an IR remote control to operate your devices from a distance.
This keypad is a great addition to any home theater or audio system, as it provides a convenient and easy-to-use way to control your devices.
Channel Vision A0129 is a keypad controller that can be used with Channel Vision's A0350, WA-350, and WA-351 audio and video devices. It features volume up and down buttons, a power button, and a mute button, allowing you to easily control the audio and video output of your connected devices. The keypad also includes an IR receiver, which allows you to use an IR remote control to operate your devices from a distance.
This keypad is a great addition to any home theater or audio system, as it provides a convenient and easy-to-use way to control your devices.
A0129
IR Keypad for A0350 & WA-350/WA-351
Pwr
Mute
Vol
+
Vol
-
1
1
Pwr
Mute
Vol
+
Vol
-
A0129 Keypad
3
A0129 ... Keypad controller for use with the A0350, WA-350/WA-351
Features:
• Controls Channel Vision’s A0350, WA-350, and WA-351
• Available in white
Power button.
Turns off the audio and
video playing in a zone.
Mute button.
Mutes the audio playing
in a zone (video will still
be present).
IR receiver.
Detects IR signals and repeats
through the IR system.
Volume +/- buttons.
Increases or decreases
the audio level in a zone.
2
Wiring the A0129 keypad...
Keypads connect to the through the RJ45 jacks on
the back panel of these products. Connections to the A0129 may be
accomplished either by using the RJ45 jack or the screw terminals provided
on the back side of the keypad. When using the RJ45 jacks, simply wire both
ends of the cable according to the TIA568A standard. When using the screw
terminals on the A0129, make sure to wire the RJ45 plug connecting to the
as shown below.
A0350, WA-350/WA-351
A0129
A0350/WA-35x
Front
Rear
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
Pwr
Mute
Vol
+
Vol
-
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
N.C.
Pin 7: Ground
Pin 8: +VDC
Pin 4: IR signal
Pwr
Mute
Vol
+
Vol
-
A0129 Keypad
3
A0129 ... Keypad controller for use with the A0350, WA-350/WA-351
Features:
• Controls Channel Vision’s A0350, WA-350, and WA-351
• Available in white
Power button.
Turns off the audio and
video playing in a zone.
Mute button.
Mutes the audio playing
in a zone (video will still
be present).
IR receiver.
Detects IR signals and repeats
through the IR system.
Volume +/- buttons.
Increases or decreases
the audio level in a zone.
2
Wiring the A0129 keypad...
Keypads connect to the through the RJ45 jacks on
the back panel of these products. Connections to the A0129 may be
accomplished either by using the RJ45 jack or the screw terminals provided
on the back side of the keypad. When using the RJ45 jacks, simply wire both
ends of the cable according to the TIA568A standard. When using the screw
terminals on the A0129, make sure to wire the RJ45 plug connecting to the
as shown below.
A0350, WA-350/WA-351
A0129
A0350/WA-35x
Front
Rear
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
Pwr
Mute
Vol
+
Vol
-
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
N.C.
Pin 7: Ground
Pin 8: +VDC
Pin 4: IR signal
C
H
A
N
NEL
V
I
SI
ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CA
TV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
TM
C
HAN
N
E
L V
IS
IO
N
S
O
U
R
C
E
ZONE
POWER
MUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Pwr
Mute
Vol
+
Vol
-
Power button will
turn off/on zone
When the system
is powered back on
each zone will return
to its previous volume
level and source
selection.
Using the A050 remote control..
(Download IR codes at: www.channelvision.com and www.remotecentral.com)
5 designed to control your A0350, WA-35x.
Pwr
Mute
Vol
+
Vol
-
Zone Power - Turns on/off the zone you are in
Power - Master power
(turns all zones on/off)
Mute - Mutes the audio
for the zone you are in
VOL - Controls volume
for the zone you are in
4
5
A0350
WA-350/WA-351
A0129
A0129
Keypad Input... Connect the A0129 here
CAT5 Audio Input... Connect the output of your CAT5 audio hub
here
Connection to A0350, WA-35x Amplifier
CAT5 Audio Input... Connect the output of your CAT5
audio hub here
Keypad Input... Connect the A0129 here
C
H
A
N
NEL
V
I
SI
ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CA
TV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
TM
C
H
A
N
NEL VIS
I
ON
S
O
U
R
C
E
ZONE
POWER
MUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Pwr
Mute
Vol
+
Vol
-
Power button will
turn off/on zone
When the system
is powered back on
each zone will return
to its previous volume
level and source
selection.
Using the A050 remote control..
(Download IR codes at: www.channelvision.com and www.remotecentral.com)
5 designed to control your A0350, WA-35x.
Pwr
Mute
Vol
+
Vol
-
Zone Power - Turns on/off the zone you are in
Power - Master power
(turns all zones on/off)
Mute - Mutes the audio
for the zone you are in
VOL - Controls volume
for the zone you are in
4
5
A0350
WA-350/WA-351
A0129
A0129
Keypad Input... Connect the A0129 here
CAT5 Audio Input... Connect the output of your CAT5 audio hub
here
Connection to A0350, WA-35x Amplifier
CAT5 Audio Input... Connect the output of your CAT5
audio hub here
Keypad Input... Connect the A0129 here
IR-4180 ... IR link cable. Can be used to transmit IR
A0501, A0502, or A0505 ... Remote control. Contains IR
codes for controlling the Amplified Wireless Audio Receiver
as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad.
codes to operate the volume controls in the Amplified
Wireless Audio Receiver. You may also use a standard IR
receiver or a 3rd party keypad. When using a simple IR
receiver, you will need to use the A0505 remote control
which contains the IR codes to control the WA-350, WA-351,
and A0350. IR codes can be downloaded from
www.channelvision.com, or learned from an A0505 remote
control.
The A0127 contains the IR
Pwr
Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
C
HAN
NE
L V
ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing
Speakers... Channel Vision offers a full line of premium
speakers. These speakers are perfect for whole-house music
or home theater applications.
Using the A0350 and A0129 in a Stand-alone System
The A0350 can be flush-mounted in a room to power in-wall speakers. By
connecting the audio outputs from an audio source to the RCA inputs of the
A0350, the audio signal will be amplified to the in-wall speakers. Most audio
sources only offer a fixed audio output, A0350 volume level can be adjusted by
using an A0129 keypad or by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
A0129
A0350
Pwr
Mute
Vol
+
Vol
-
TM
B y CH ANNE L VI SI ON
A ria
Local In
Active
Spkrs
24VDCIR In
Flush Mount Amplifier
Left
Right
CD player
The keypad volume control will determine
the volume of the in-wall speakers as well
as the powered subwoofer.
Powered
Subwoofer
6
7
IR-4180 ... IR link cable. Can be used to transmit IR
A0501, A0502, or A0505 ... Remote control. Contains IR
codes for controlling the Amplified Wireless Audio Receiver
as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad.
codes to operate the volume controls in the Amplified
Wireless Audio Receiver. You may also use a standard IR
receiver or a 3rd party keypad. When using a simple IR
receiver, you will need to use the A0505 remote control
which contains the IR codes to control the WA-350, WA-351,
and A0350. IR codes can be downloaded from
www.channelvision.com, or learned from an A0505 remote
control.
The A0127 contains the IR
Pwr
Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
C
HAN
NE
L V
ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing
Speakers... Channel Vision offers a full line of premium
speakers. These speakers are perfect for whole-house music
or home theater applications.
Using the A0350 and A0129 in a Stand-alone System
The A0350 can be flush-mounted in a room to power in-wall speakers. By
connecting the audio outputs from an audio source to the RCA inputs of the
A0350, the audio signal will be amplified to the in-wall speakers. Most audio
sources only offer a fixed audio output, A0350 volume level can be adjusted by
using an A0129 keypad or by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
A0129
A0350
Pwr
Mute
Vol
+
Vol
-
TM
B y CH ANNE L VI SI ON
A ria
Local In
Active
Spkrs
24VDCIR In
Flush Mount Amplifier
Left
Right
CD player
The keypad volume control will determine
the volume of the in-wall speakers as well
as the powered subwoofer.
Powered
Subwoofer
6
7
500-300 revA
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
1
Stripping and Connecting CAT5 Wire
Blade
CAT5
1. Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
Slight
pressure
Rotate
1 turn only
2. Rotate the tool only once. Multiple
turns could damage the inner wires.
3. Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
Green/White - Left channel ground
Green - Left channel
Orange/White - Right channel ground
Blue - Signal
Blue/White - Status
Orange - Right channel
Brown/White - Ground
Brown - 24vDC
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
500-300 revA
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
1
Stripping and Connecting CAT5 Wire
Blade
CAT5
1. Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
Slight
pressure
Rotate
1 turn only
2. Rotate the tool only once. Multiple
turns could damage the inner wires.
3. Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
Green/White - Left channel ground
Green - Left channel
Orange/White - Right channel ground
Blue - Signal
Blue/White - Status
Orange - Right channel
Brown/White - Ground
Brown - 24vDC
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Channel Vision A0129 is a keypad controller that can be used with Channel Vision's A0350, WA-350, and WA-351 audio and video devices. It features volume up and down buttons, a power button, and a mute button, allowing you to easily control the audio and video output of your connected devices. The keypad also includes an IR receiver, which allows you to use an IR remote control to operate your devices from a distance.
This keypad is a great addition to any home theater or audio system, as it provides a convenient and easy-to-use way to control your devices.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Channel Vision Aria A0350 Instructions Manual
-
-
-
-
-
Aria WA-350 User manual
-
-
-
-
Other documents
-
-
-
System Sensor SAA: CHR, CHW, CHSR and CHSW User manual
-
-
-
-
WEG MVW3000 User manual
-
Roland PR-1000HD Owner's manual
-
Proficient Audio Systems M6 Quick start guide
-