SUPCO SHL502, SHL504, SHL505, SHL511, SHL515, SHL518 Installation guide

Hello! I am an AI chatbot trained to assist you with the SUPCO SHL502 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!



ReplacingaSupcoPlenumThermostat.



1. Turnoffpowertounit.

2. Removetheaccesspanel.

3. Disconnecttwowiresattachedtothethermostat

terminals

4. Unscrewthescrewsholdingthethermostatinplace.

5. Removethethermostat.

6. Checkthethermostattemperatureinformationonthe

oldplenumthermostatandmakesureitmatches

Supcoreplacement.

Donotuseathermostatwith

higheropeningtemperature.

7. InsertthenewSupcothermostatandsecurewith

screws.

8. Re‐attachthewires.Youcanattachwirestoeither

terminal.Thereisnopolarity.

Makesuretheterminalsorwiresarenotdamagedand

fitsecurelyontheplenum.

Ifthewireterminalsareloose,replacethem.

9. Attachtheaccesspanel.

10. Turnonpower.







SEALEDUNITPARTSCO.,INC.

POBOX21,2230LANDMARKPLACE

ALLENWOOD,NJ08720USA





/

Related papers

Other documents