RAB Lighting DLPLATE/SJ Operating instructions

Type
Operating instructions
IMPORTANT
INSTRUCTIONS
DLPLATE/SJ
WARNING - Wear safety gloves and other appropriate safety equipment.
Circular Knockout
(CKO) Instructions
Compatible products
A: Ø4-5/16”
B: Ø6-5/16”
C: Ø8-1/16”
Edge-Lit Wafer 4” Edge-Lit Wafer FA 4” Gimbal 4”
Edge-Lit Wafer 6” Edge-Lit Wafer FA 6”Edge-Lit Wafer UNV 6” Performance Downlight 6” Performance Downlight FA 6”
Edge-Lit Wafer UNV 8” Performance Downlight 8” Performance Downlight FA 8”
*
* only compatible with smooth model
COMPATIBLE PRODUCTS
A
C
B
INSTRUCTIONS
DLPLATE/SJ
INSTALLATION INSTRUCTIONS
v
Easy Answers
PLATESJ-IN-0220
DIMENSIONAL DRAWINGS
1. Use cutting pliers to remove any CKO sections necessary to install the downlight. (fig.1)
2. Nail or screw the plate to the studes/joists of ceiling. (fig.2)
3. Make appropriate electrical connection if required, and follow the installation instruction of downlight. (fig.3)
Fig.1 Fig.2 Fig.3
Screws
8 1/16”
4 5/16”
1/32”
11 15/16”
19 11/16”
6 1/4”
  • Page 1 1
  • Page 2 2

RAB Lighting DLPLATE/SJ Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI