Signature Hardware 354411 Installation guide

Brand: Signature Hardware

Model: 354411

Type: Installation guide

1Three Way In-Wall Shower Diverter

THREE-WAY IN-WALL SHOWER DIVERTER

ADDITIONAL INFORMATION

Your new three-way in-wall shower diverter is able to connect to up to three different outputs. You can select a combination of shower heads, body sprays and

hand showers to create your own customized shower system. If only two outputs are desired, simply close the third output with a threaded brass

plug (provided).

The three-way diverter allows you to alternate between any of your selected shower outputs by directing the water from the shower head to each additional

accessory, one at a time. The diverter will not adjust the water temperature or turn the water off or on.

All rough-in work should be completed by a professional. Some of our three-way shower diverters come with an adjustable stem. These diverters can be

adjusted to the appropriate length by trimming with a hack saw.

This diverter is included in many of our shower systems, or can be purchased separately and combined with any tub and shower faucet or in-wall shower.