APM AAM-5005aM-ICU User manual

Type
User manual
1 of 1
APM CO., LTD
AAM-5005aM-ICU
Features
For IEEE802.11a Transmit P1dB: +30dBm
Fixed TX/RX Gain High switching speed
Incase Use TX/RX LED Indication
Specification
Output Power +26 dBm ±1.5dByields 36Mbs for OFDM
Operating Range 5100-5900 MHz
Operating Mode Bi-Directional TDD
Transmit Gain 8dB ±2dB (optional: 12dB)
Frequency Response ±1.5dB
Signal Type IEEE802.11a
TXRX Switch Time <500 nSec
TX Input Power 2dBm Min18dBm Max
Receiver Gain 8dB ± 2dB
Noise Figure <3.5dB typical
Connectors In: SMA(F); Out: SMA(F) , 50 Ohm
Power Consumption Tx: <0.8A / Rx: <80mA @ 5.0 VDC
LED Indication Transmit: GreenReceive: Red
AMP Dimensions 93L * 60W * 31H ( mm )
Operating Temperature 0 ~ +60
22F-6, No.180, Jingping Rd, Jhonghe City, Taipei County 23581, Taiwan, R.O.C.
www.apm.com.tw [email protected] Tel: +886 2 89431966 Fax: +886 2 89434944
  • Page 1 1

APM AAM-5005aM-ICU User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI