Sytech SYXTR32 Owner's manual

Brand: Sytech

Model: SYXTR32

Category: Portable speakers

Type: Owner's manual

SY·XTR32

PROFESSIONAL ACOUSTIC SYSTEM

USER

MANUAL

Welcome

Thank you for purchasing the new Wireless professional acoustic system “Prism Series” SY-

XTR32. Please read this manual carefully before operating your product and pay close attention

to the precautions which are mentioned below. Store this user manual in a safe place for future

reference

Safety Precautions

Points to observe for safe usage

Read this manual carefully before using this item and its components. They contain

instructions on how to use this product in a safe and effective manner. SYTECH cannot

be responsible for problems resulting from failure to observe the instructions in this

manual.

Turn off the device immediately in case of a problem.

Failure to do so may cause personal injury or damage to the product.

Return it to your authorized SYTECH dealer for repairing.

Product cleaning.

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please

dampen the cloth with water only. Anything else has the chance of dissolving the paint

or damaging the plastic.

Temperature.

Be sure the temperature inside the room is between +35℃（+95℉）and -10℃

（+14℉）before turning your unit on.

Maintenance.

If you have problems, do not attempt to repair the unit yourself.

Placement.

Place the product on a flat surface.

Provide enough space around the product for sufficient ventilation.

Heat.

Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.

Accessories.

Use only supplied accessories

Battery.

Avoid overcharging. The battery could overheat.

Replace battery.

The built-in rechargeable battery is not replaceable. Do not remove or replace the

battery, do not throw in the trash or in the fire.

Charging the speaker

 When charging, connect the provided power adapter to an AC100V~AC240V port

 Charging time is approximately 4 to 8 hours.

 Once it is fully charged unplug the power supply, as leaving a full battery on charge may

cause damage to the battery.

 Battery Charge Indicator: The LED panel has a battery status indicator which

shows four horizontal lines, each horizontal line represents 25% of the

capacity remaining. When no horizontal line is shown or the empty battery

icon is blinking, please power off and promptly charge to avoid damage to

the battery.

 When charging, the battery indicator on the LED display panel begins to flash

 The indicator stops blinking after the battery has gained full charge.

 Warning: If the battery is under voltage, please charge it completely within 48 hours.

 If the speaker has been left unused for a long time, please let the battery fully charge before

using it again, otherwise it will cause damage to the battery!

 During the process of playback, keep the unit away from high temperature environments,

high magnetic fields and high frequencies. If the system fails to work, turn off the power

source or pull out the USB disc/TF card, then reinsert it and resume playback.

Remote Control Functions

1. Mute

2. Input Selection

3. Increase Volume

4. Play/pause

5. Previous

6. Decrease Volume

7. Next

8. LED light control

9. Repeat

10. Record/Playback recording

11. Previous Folder

12. Next Folder

***This picture is for reference purposes only.

1. Under normal circumstances, the remote control should be aimed directly at the

receiving window of the unit from about 6 meters and within a 30° angle.

2. When operating the remote control, aim the remote control at the receiving window of

the unit and ensure that there are no obstacles between the remote control and the

unit.

3. If the remote receiver is in a position to direct sunlight, it may fail. In this case, move

the speaker away to avoid the light.

4. Avoid mixing old and new batteries. Replace the remote control batteries regularly.

Functions and connections

1. Power Switch

2. MIC Slot

3. Guitar Socket

4. Audio Output

5. Mic Volume

6. Echo

7. Guitar Volume

8. Treble

9. Bass

10. Volume

11.

Audio Input

12. USB slot

13. TF slot

14. DC 15V IN

15. Repeat

16. MIC Priority

17. Previous

18. Input Selection

19. Next

20. Play/Pause/Scan

21. Record/Playback Recording

LED Light Control

Guitar

 Guitar Jack: Connect your guitar through the jack which is placed on the top part of the unit.

 Guitar VOL: Adjust the volume level to the desired level using the Guitar VOL +/- buttons on

the unit.

USB and TF

 Make sure your Micro-SD cart (TF Card) or USB stick is formatted as FAT32. If not the

speaker will not recognize the memory device.

 The playback sequence of the speaker is based on the way the files are saved. If the master

folder has files saved as 01, 02 or 03... The speaker will play the 01 file first.

 Copy an MP3 or WMA format music file (download) to the root directory of a USB disc or

Micro-SD card (TF card). It is advisable to remove unnecessary files and the file catalog in

order for the unit to read the USB/TF card faster and reduce reading errors when playing

songs.

Wireless Microphone

(This picture is for reference purposes only!)

 Open the battery compartment, insert the batteries and ensure that the polarities are correct.

 Switch ON the power switch on the microphone or ear microphone transmitters. If the power

indicator light does not light up, check that the battery has been inserted correctly.

 Adjust the microphone volume knob on the speaker

 When singing, if you need to suspend the wireless microphones, please switch to mute state

(center) on the microphone, and if you want to stop using the microphone, please switch to

the off state.

 It is advisable to maintain a minimum distance between the speaker and microphone of

approx. 2-3m

 If the microphone stops working or emitting sound, it is recommended to replace the

batteries as soon as possible.

 This device does not support 2 wireless microphones simultaneously.

 The wireless microphone (included) can work simultaneously with a microphone connected

through he "Jack" socket (15)

Recording function

 Press “REC/REC.PLAY” to record the voice into an external memory USB disc or a Micro-

SD card (TF card) on the speaker. If the external memory is being used for the first time, the

system will automatically build a new folder named “RECORD” and all the recorded files in it

will be named as REC001, REC002, and so on.

 In recording mode, press “REC/REC.PLAY”/”INPUT” to stop recording.

 Press and hold “REC/REC.PLAY” to play the recordings from the external memory. Press

PREV and NEXT to choose the desired recordings for payback.

 The recording function is not available when connecting any type of device at the rear

“Guitar” input.

 The rear input "Guitar" has its own volume control on the backside of the unit and only this

option can be used to change the volume levels when using this input.

Built-in BT functions

 Select the BLUETOOTH mode using the “INPUT” switch on the top panel of the unit or from

the remote control itself.

 Please ensure the BT devices you wish to connect has the Bluetooth function enabled and

visible.

 Start the scan function from your device and search for “SY-XTR32”.

 Once you have found the device, press on it and connect the speaker with the device.

 When the connection is successful, a “tick” tone will be heard. If the speaker can’t be

connected, please restart the speaker or the device and try again.

 After the connection is successfully established, you can begin to play music. To ensure

continuous stability of the music signal, try to keep the BT device and the mobile phone

facing one another.

 The BT of the unit can be used up to 10 meters if there are no barriers.

FM function

 Choose “INPUT” to switch between FM/BT/USB modes (in this case choose FM)

 Choose “SCAN” for automatic channel searching and saving.

 Choose “PREV“ or “NEXT” to switch channels.

 A maximum of 40 presets can be stored

 Channels will be stored automatically in the order of the channels scanned. It is not possible

to store the channel manually.

Main technical specifications

Basic Specifications

• High resistant material finishing

• FM tuner with 40 preset memory stations

• Built-in amplifier for connecting musical

instruments: Electric guitar, Electronic

keyboard

• LED display indicating track number and

battery status

• LED lights integrated on the speaker

• Recording function

• Aux in feature

Bluetooth Specifications

• Bluetooth Module: CW6639

• Bluetooth Version: V2.1 + EDR

• Bluetooth Support 3.0

• Bluetooth Profiles: A2DP, AVRCP

• Bluetooth Pairing name: SY-XTR32

• Compatible Audio Formats in Bluetooth:

MP3/WMA/WAV

USB/TF card Specifications

• 2.0 USB Port (Max Capacity: 64GB)

• TF Card Slot (Max Capacity: 64GB)

• Compatible Audio Formats in USB:

MP3/WMA/WAV

• Compatible Audio Formats in TF:

MP3/WMA/WAV

MIC Specifications

• Wireless MIC

• MIC Frequency: 201.6Mhz

• Regulating mode: FM

• Sensitivity: 80dB (S/N=40dB)

• Karaoke function & “Mic priority”

• Microphone input with volume and echo

control

Technical Specifications

• Output power: 100W

• Input sensitivity: 800mV

• SNR: ≥75dB

• Frequency response: 60Hz-20 kHz

• Power supply: AC100V- AC240V, 60Hz/50Hz

• Battery: 12v 3Ah

• Working Time: 3-8 hours

• Charging Time: 4-8 hours

• 2 ways speakers: 12” Woofer, 3” tweeter

• Above specifications are the specifications of SY-XTR32 “Prism Series” and are for

reference purpose only.

• Due to continuous product development, specifications may be subject to change without

prior notification.

• Do not expose to adverse weather conditions (Such as rain or high temperatures) as it can

cause malfunctions

Troubleshooting

Fault Possible Cause Solution

No sound

No input sound source.

Volume is too low.

Use a better music signal.

Adjust the volume.

Distortion

of sound

Volume too high.

Speaker may be damaged.

Turn down the volume.

If speaker is damaged, contact the

technical department.

Karaoke

does not

work

Microphone plug is not fully

inserted.

Microphone switch is not on.

Microphone volume knob is at the

lowest position.

Wireless microphone has low

battery.

Plug microphone properly into the

socket.

Turn on microphone switch.

Adjust microphone volume

properly.

Replace battery.

MP3 does

not play

The song format in the USB disc is

incorrect.

Improper operation has caused a

process disorder.

USB disc/TF is disconnected.

Transform song format into Mp3

format.

Reboot the machine.

Insert the USB disc/TF properly.

Declaration of Conformity

Manufacturer Name: Satyatrade S. L.

Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.

Camarma de Esteruelas, 28816 Madrid

Tel: 902 430 967

Fax: 91 8864285

NIF: B83254763

Manufacturing country: China

Description: Trolley Speaker

Sytech® SY-XTR32 complies with the following directives:

RED Standard: Directive 2014/53/EU

ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances

Signed: Ajeet Nebhwani Utamchandani

Sole Administrator

Sytech SYXTR32 Owner's manual

Brand: Sytech

Model: SYXTR32

Category: Portable speakers

Type: Owner's manual

Download PDF

report

Sytech SYXTR32 Owner's manual

Sytech SYXTR32 Owner's manual

Related papers

Other documents