ACTiSYS IR303FM Supplementary Manual

Type
Supplementary Manual

This manual is also suitable for

ACTiSYS ACT-IR303FM is a comprehensive suite of hardware and software tools designed to aid in the development, testing, and debugging of IrFM and Fast Connect for IrFM PTD and/or POS. It facilitates testing, promotes interoperability, and speeds up the IrDA certification process.

The suite includes:

  • IrFM PTD with Fast Connect Simulator Hardware (IR103SP) and SW (ACTiLinkPTD)
  • IrFM POS with Fast Connect Simulator Hardware (IR103SL) and SW (ACTiLinkPOS)
  • IrFM with Fast Connect Recording Hardware (IR910D) and Software (IR912SW)
  • IrFM with Fast Connect Recording Analyzer Software (IR913SW)

ACTiSYS ACT-IR303FM is a comprehensive suite of hardware and software tools designed to aid in the development, testing, and debugging of IrFM and Fast Connect for IrFM PTD and/or POS. It facilitates testing, promotes interoperability, and speeds up the IrDA certification process.

The suite includes:

  • IrFM PTD with Fast Connect Simulator Hardware (IR103SP) and SW (ACTiLinkPTD)
  • IrFM POS with Fast Connect Simulator Hardware (IR103SL) and SW (ACTiLinkPOS)
  • IrFM with Fast Connect Recording Hardware (IR910D) and Software (IR912SW)
  • IrFM with Fast Connect Recording Analyzer Software (IR913SW)
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 1 of 8
ACTiSYS Confidential
Corp.
48511 Warm Springs Blvd., Suite 206, Fremont, CA 94539 Tel: (510)490-8024,
Fax: (510)623-7268, Website: http:\\www.actisys.com, E-mail: [email protected]
IrFM And Fast Connect Debug/Test Suite
(ACT-IR303FM, v1.0, 2003/04/06)
(c) Copyright ACTiSYS Corp. 2002-2003
April 06, 2003
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 2 of 8
ACTiSYS Confidential
IrFM And Fast Connect Debug/Test Suite
(ACT-IR303FM, v1.0, 030406)
Revision History
Revision Date Comment
Rev. 0.1.0 11/25/2002 Updated contents
Rev. 0.1.1 12/03/2002 Updated model #s
Rev. 0.1.2 12/23/2002 Added IrFM And Fast Connect/IrOBEX/IrFM block diagram in Sec.D
Rev. 0.1.3 12/24/2002 Added IrFM Implementation Strategy in Sec.E
Rev. 0.1.4 12/25/2002 Editorial changes; Added IR103SLi/IR8203LM5VP photo in Sec.E-2
Rev. 0.1.5 01/08/2003 Moved Rev. History to page #2; Updated model name, IR8200LA-M
Rev. 1.0 04/06/2003 Added extra IrFM simulation/test features.
Added script files, configuration files, and TinyTP text file
ACTiSYS reserves the right to make changes without further notice to any products herein to
improve reliability, function or design. ACTiSYS does not assume any liability arising out of the
application or use of any product or circuit described herein.
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 3 of 8
ACTiSYS Confidential
IrFM And Fast Connect Debug/Test Suite
(ACT-IR303FM, v1.0, 2003/04/06)
Table of Contents
Revision History ....................................................................................................................... 2
A) The ACT-IR303FM Suite................................................................................................... 4
B) Benefits of ACT-IR303FM Suite ....................................................................................... 4
C) Hardware/Software Included in the Suite ........................................................................ 4
C-1) IrFM PTD IrFM And Fast Connect Simulator (ACTiLinkPTD and IR203L) ............. 4
C-2) IrFM POS IrFM And Fast Connect Simulator (ACTiLinkPOS and IR223L).............. 5
C-3) IrFM And Fast Connect Recording Program (ACT-IR912SW and IR910D) .............. 5
C-4) IrFM And Fast Connect Recording Analyzer (ACT-IR913SW).................................. 5
D) IrLAP IrFM And Fast Connect, IrFM Block Diagram .................................................. 6
E) IrFM Implementation Strategy ......................................................................................... 7
E-1) IrFM Implementation Plan 1 – Port Full IrDA and IrFM Protocol Layers................... 7
E-2) IrFM Implementation Plan 2 – Partition IrFM from IrDA Protocol and IrPHY .......... 7
F) IrLAP IrFM And Fast Connect, IrFM Profile, and IrDA Protocol Documents........... 8
F-1) IrLAP IrFM And Fast Connect Spec............................................................................. 8
F-2) IrFM Profile Spec. IrFM Test Spec............................................................................... 8
F-3) IrDA Protocol Spec. ...................................................................................................... 8
F-4) IrDA Protocol/FastConnect and IrPHY Module (ACT-IR8203LM) Spec. .................. 8
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 4 of 8
ACTiSYS Confidential
Corp.
48511 Warm Springs Blvd., Suite 206, Fremont, CA 94539 Tel: (510)490-8024,
Fax: (510)623-7268, Website: http:\\www.actisys.com, E-mail: [email protected]
IrFM And Fast Connect Debug/Test Suite
(ACT-IR303FM, v1.0, 2003/04/06)
(c) Copyright ACTiSYS Corp. 2002-2003
A) The ACT-IR303FM Suite
"IrFM And Fast Connect Debug/Test Suite" is a set of hardware/software designed to test
and debug IrFM and Fast Connect for IrFM PTD and/or POS under development.
B) Benefits of ACT-IR303FM Suite
1) Facilitates testing and debugging of IrFM and Fast Connect for IrFM PTD and/or POS.
2) Promotes inter-operability of IrFM and Fast Connect for IrFM PTD and POS.
3) Speeds up the IrDA certification process.
4) Speeds up time to market.
C) Hardware/Software Included in the Suite
1) IrFM PTD with Fast Connect Simulator Hardware (IR103SP) and SW (ACTiLinkPTD).
2) IrFM POS with Fast Connect Simulator Hardware (IR103SL) and SW (ACTiLinkPOS).
3) IrFM with Fast Connect Recording Hardware (IR910D) and Software (IR912SW).
4) IrFM with Fast Connect Recording Analyzer Software (IR913SW).
C-1) IrFM PTD And Fast Connect Simulator (ACTiLinkPTD and IR103SP)
1) This program runs in a PC (not included) and uses a special IrDA dongle (IR103SL,
included in this Suite) to simulate different kinds of IrFM PTD, performing IrFM
with Fast Connect functions.
2) Under software control, the simulated PTD (Personal Trusted Device, e.g. cellphone,
PDA, e-wallet) can use either standard power or low power IrPHY.
3) Under software control, the simulated PTD can use either 1.6 usec or 3/16 bit-time IR
pulses.
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 5 of 8
ACTiSYS Confidential
4) Under software control, the simulated PTD responds to XID from POS with either XID at
9.6 kb/s, XID at 115.2 kb/s, or UA at 115.2 kb/s. (These are the three options defined in
Fast Connect.)
5) Configuration files are supplied. These files direct the PTD Simulator to test POS
according to IrDA IrFM Test Spec.
C-2) IrFM POS And Fast Connect Simulator (ACTiLinkPOS and IR103SL)
1) This program runs in a PC (not included) and uses a special IrDA dongle (IR103SL,
included in this Suite) to simulate IrFM POS with Fast Connect functions.
2) The visiting PTD can use either standard power or low power IrPHY.
3) The visiting PTD can use either 1.6 usec or 3/16 bit-time IR pulses.
4) The visiting PTD can use either 0xFF or 0xC0 as XBOF when needed.
5) The visiting PTD can respond with either XID at 9.6 kb/s, XID at 115.2 kb/s, or UA at
115.2 kb/s. (These are the three options defined in IrFM with Fast Connect.) This
simulated POS can auto-detect the data rate and perform Fast Connect accordingly.
6) Under software control, this simulated POS can vary its 1-slot XID polling period
between 55 msec and 300 msec as specified in Fast Connect.
7) Script files are supplied. These script files direct the POS Simulator to test PTD
according to IrDA IrFM Test Spec.
C-3) IrFM With Fast Connect Recording Program (ACT-IR912SW and IR910D)
1) This program runs in a PC (not included) and records the conversation between PTD
and POS at data rates of 9.6, 19.2, 38.4, 57.6, or 115.2 kb/s. (It changes data rate
automatically to follow the conversation.)
2) This program uses a special IrDA dongle (ACT-IR910D, Dual-Head IR220L+,
included in this Suite) to receive from both the PTD and POS. It never transmits.
3) If there is a collision or if there is IR interference, this program will record an error.
The corrupted IR data from either the PTD or POS are lost.
4) This program is aware of the rules specified in IrDA IrFM with Fast Connection and
IrLAP Negotiation Procedures. It will automatically change the data rate of its receivers,
according to these rules and correctly follow the conversation between the PTD and POS.
But if the PTD or POS changes data rate not according to these rules, this program may
not be able to follow the conversation after that point.
5) Every byte of IR received is time-stamped and recorded in a binary file.
C-4) IrFM With Fast Connect Recording Analyzer (ACT-IR913SW)
1) This program reads the binary file generated by the Recording Program and transcribes
the information into three ASCII text files.
2) The first text file has all the details at the IrPHY level. It shows all the IR bytes received,
including IR-noise, XBOF, BOF, byte stuffing, CRC, EOF, etc. It organizes these bytes
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 6 of 8
ACTiSYS Confidential
into IrPHY frames whenever possible. It also includes timing information in msec with
0.1 msec resolution to show inter-frame gaps, inter-byte gaps inside the frame if any, and
total transmission time of each frame. CRC is also checked at this level.
3) The second text file has only the details at the IrLAP level. The timing information and
frame wrapper are stripped. Proper sequencing of Nr and Ns are checked at this level.
4) The third text file has only the details at the IrLMP level. That is, only the payload of
IrLAP I-frame is shown. This includes the IrLMP Destination, IrLMP Source, TinyTP
and all upper layer data.
5) The fourth text file has only the details at the TinyTP level.
6) All frames in the above 4 text files are assigned arbitrary but unique sequential numbers
for easy cross-referencing between these 4 text files.
D) IrFM and IrDA Block Diagram
ACT-IR303FM only addresses IrPHY+IrLAP with Fast Connect+IrLMP+TinyTP+
IAS+IrFM OBEX Transport (the green color section in diagram shown below).
It does not include the full stack, but does address the testing of, other IrFM
protocol layers, which must be a part of the host system application software:
IrFM OBEX/Core IrFM Protocol/Proprietary Services/ Core IrFM Services/IrFM
Application (the gray color section in diagram below).
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 7 of 8
ACTiSYS Confidential
E) IrFM Implementation Strategy
For IrFM implementation in POS system, there are two approaches:
E-1) IrFM Implementation Plan 1 – To Port Full IrDA and IrFM Protocol Layers
1) Port the full IrDA and IrFM protocol layers onto the POS microprocessor.
2) POS manufacturer needs to port and integrate these IrDA protocol layers properly
with POS host system software.
3) POS manufacturer needs to test for compliance with IrDA and IrFM spec.
4) POS manufacturer needs to implement properly IrDA and IrFM And Fast Connect
physical components (transceiver, encode/decode IC) and PCB layout.
5) In case of IrFM or IrOBEX correction or updates, POS manufacturer may need to
re-do (1) - (3) above, again, each time to meet IrReady spec.
6) IrLAP with Fast Connect may not be optimized to perform fast enough connection.
E-2) IrFM Implementation Plan 2 – To Partition IrFM from IrDA Protocol and IrPHY
1) Port IrFM and IrOBEX protocol layers onto the POS microprocessor.
2) Use ready made and pre-tested IrDA/FastConnect internal PCB or chip set, which
includes IrDA core protocol layers and IrDA Physical (with IrFM Fast Connect).
3) IrFM POS system is easier and quicker to pass IrReady certification tests.
4) In case of IrFM or IrOBEX correction or updates, POS manufacturer needs not to
touch the performance and IrReady sensitive IrDA/FastConnect module.
5) Much faster to pass IrReady certification tests, and time to market, even
after each application revision.
6) An example of such ready made/pre-tested IrDA/FastConnect internal PCB,
ACTiSYS ACT-IR103SLi (uses chip set: ACT-IR8203LM5VP) is shown below:
ACT-IR303FM, v1.0, 2003/04/06 IrFM and Fast Connect Debug/Test Suite
© Copyright 2002-2003, ACTiSYS Page 8 of 8
ACTiSYS Confidential
F) IrLAP+Fast Connect, IrFM Profile, and IrDA Protocol Documents
F-1) IrLAP And Fast Connect Spec.
"IrLAP And Fast Connect (Application Note), Version 1.0", IrDA, Nov. 2002
F-2) IrFM Profile Spec. IrFM Test Spec.
"IrFM Point and Pay Profile, Version 1.0", IrDA, Dec. 2002
"IrFM Test Specification, Version 1.0", IrDA, Dec. 2002
"IrFM OBEX Test Specification, Version 1.0", IrDA, Dec. 2002
“IrFM Qualification Program, Version 0.3”, IrDA, Nov. 2002
“IrFM Lower Layers Test Spec., Version 0.1”, April, 2003
F-3) IrDA Protocol Spec.
"Serial Infrared Link Access Protocol, IrLAP, Version 1.1", IrDA, Jun. 1996
"Link Management Protocol, IrLMP, Version 1.1", IrDA, Jan. 1996
"Tiny TP, Version 1.1", IrDA, Oct. 1996
"Object Exchange Protocol, IrOBEX, Version 1.2", IrDA, Mar. 1999
F-4) IrDA Protocol+FastConnect and IrPHY Module (ACT-IR8203LM) Spec.
ACTiSYS ACT-IR8203LM / IR103SLi Product Spec., ACTiSYS Corp., Feb. 2003
"Serial Infrared Physical Layer Link Spec, IrPHY, Ver. 1.3", IrDA, Oct. 1998
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

ACTiSYS IR303FM Supplementary Manual

Type
Supplementary Manual
This manual is also suitable for

ACTiSYS ACT-IR303FM is a comprehensive suite of hardware and software tools designed to aid in the development, testing, and debugging of IrFM and Fast Connect for IrFM PTD and/or POS. It facilitates testing, promotes interoperability, and speeds up the IrDA certification process.

The suite includes:

  • IrFM PTD with Fast Connect Simulator Hardware (IR103SP) and SW (ACTiLinkPTD)
  • IrFM POS with Fast Connect Simulator Hardware (IR103SL) and SW (ACTiLinkPOS)
  • IrFM with Fast Connect Recording Hardware (IR910D) and Software (IR912SW)
  • IrFM with Fast Connect Recording Analyzer Software (IR913SW)

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI