Banner BWA-ANTKIT-001 User manual

Brand: Banner

Model: BWA-ANTKIT-001

Type: User manual

Printed in USA Jul 2013 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 77481 BWA-9O6-A Antenna, Omni, 902–928 MHz, 6 dBd, 6 ft Fiberglass, N-Type FEMALE, with mounting

hardware

2 1 77490 BWC-4MNFN6 LMR400, N-Type Male to N-Type Female, 6 m

3 1 12477 BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc blocking

4 1 77486 BWC-1MRSMN05 LMR200, RP-SMA to N-Type Male, 0.5 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-001

The high-gain omni-directional antenna kit includes a 6 dBd fiberglass antenna.

Part No: 18951

Antenna Kits for 900 MHz

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

2 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 17721 BWA-9O5-C Antenna, Omni, 902–928 MHz, 5 dBi, Rubber swivel, RP-SMA Male

2 1 77488 BWC-1MRSFRSB4 RG58, RP-SMA to RP-SMA Female, Bulkhead, 4 m

3 1 79296 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA

4 1 78544 BWC-1MRSFRSB02 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0.2 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-002

The mid-range gain omni-directional antenna kit includes a 5 dBi rubber swivel antenna.

Part No: 18954

P/N 159279 Rev. C 3

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 76908 BWA-9O2-C Antenna, Omni, 902–928 MHz, 2 dBi, Rubber swivel, RP-SMA Male

2 1 77488 BWC-1MRSFRSB4 RG58, RP-SMA to RP-SMA Female, Bulkhead, 4 m

3 1 79296 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA

4 1 78544 BWC-1MRSFRSB02 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0.2 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-003

The low-gain omni-directional antenna kit includes a 2 dBi rubber swivel antenna.

Part No: 18955

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

4 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 77479 BWA-9Y6-A Antenna, Yagi, 890–960 MHz, 6.5 dBd, N-Type Female

2 1 77490 BWC-4MNFN6 LMR400, N-Type Male to N-Type Female, 6 m

3 1 12477 BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc Blocking

4 1 77486 BWC-1MRSMN05 LMR200, RP-SMA to N-Type Male, 0.5 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-004

The low-gain Yagi antenna kit includes a 6.5 dBd Yagi antenna.

Part No: 18957

P/N 159279 Rev. C 5

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 77818 BWA-2O7-C Antenna, Omni, 2.4 GHz, 7 dBi, Rubber swivel, RP-SMA Male

2 1 77488 BWC-1MRSFRSB4 RG58, RP-SMA to RP-SMA Female, Bulkhead, 4 m

3 1 79296 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA

4 1 78544 BWC-1MRSFRSB02 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0.2 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-005

The mid-range gain omni-directional antenna kit includes a 7 dBi 2.4 GHz rubber swivel antenna.

Part No: 20499

Antenna Kits for 2.4 GHz

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

6 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Antenna Kit Parts List

No. Qty Part No. Model No. Description

1 1 81080 BWA-2O8-A Antenna, Omni, 2.4 GHz, 8.5 dBi, 24-inch Fiberglass, N-Type FEMALE, with mounting

hardware

2 1 77490 BWC-4MNFN6 LMR400, N-Type Male to N-Type Female, 6 m

3 1 12477 BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc blocking

4 1 77486 BWC-1MRSMN05 LMR200, RP-SMA to N-Type Male, 0.5 m

5-9 Sold separately. Antenna kits do not include the radio, power supply, or enclosure components.

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

5, 6

8, 9

Antenna Kit BWA-ANTKIT-006

The high-gain omni-directional antenna kit includes a 24” 8.5 dBi 2.4 GHz fiberglass antenna.

Part No: 20539

P/N 159279 Rev. C 7

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

SureCross® Antenna and Enclosure Kits

Enclosure Box Kit Parts List

No. Qty Part No. Model No. Description

4 See previously listed Antenna Kits

5 1 26605 DIN-35-140 DIN Rail Section, 140 mm long, 35 mm design (not shown)

6 1 77161 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown)

7 1 11320 BWA-EF14128 Enclosure, Fiberglass, Hinged, 14” x 12” x 8”

8 1 11326 BWA-PA1412 Panel, 14” x 12”

9 1 26008 PSDINM-24-10 Power Supply, 24V dc, 1 Amp, with DIN-Rail Mount

10 1 79438 BWA-CG.5-10 Cable gland, 1/2-inch NPT, 10 pack

Large Fiberglass Enclosure Kit BWA-EF14128KIT

This enclosure kit includes the 14” × 12” × 8” Fiberglass enclosure. This larger enclosure is ideal for multiple radios, a power supply,

and any additional equipment that may be necessary to solve your application.

Part No: 30410

7, 8

All other items

shown in photo

are not included in

the kit and are only

shown for scale.

Enclosure Kits

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

8 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Enclosure Box Kit Parts List

No. Qty Part No. Model No. Description

4 See previously listed Antenna Kits

5 1 26605 DIN-35-140 DIN Rail Section, 140 mm long, 35 mm design (not shown)

6 1 77161 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown)

7 1 11321 BWA-EF1086 Enclosure, Fiberglass, Hinged, 10” x 8” x 6”

8 1 11327 BWA-PA108 Panel, 10” x 8”

9 1 26008 PSDINM-24-10 Power Supply, 24V dc, 1 Amp, with DIN Rail Mount

10 1 79438 BWA-CG.5-10 Cable gland, 1/2-inch NPT, 10 pack

7, 8

Medium Fiberglass Enclosure Kit BWA-EF1086KIT

This medium-sized enclosure kit includes the 10” × 8” × 6” Fiberglass enclosure and is ideal for a power supply and single radio.

Part No: 30411

P/N 159279 Rev. C 9

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

SureCross® Antenna and Enclosure Kits

Enclosure Box Kit Parts List

No. Qty Part No. Model No. Description

4 See previously listed Antenna Kits

5 1 26605 DIN-35-140 DIN Rail Section, 140 mm long, 35 mm design

6 1 77161 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown)

7 1 11322 BWA-EF866 Enclosure, Fiberglass, Hinged, 8” x 6” x 6”

8 1 11328 BWA-PA86 Panel, 8” x 6”

9 1 26008 PSDINM-24-10 Power Supply, 24V dc, 1 Amp, with DIN Rail Mount

10 1 79438 BWA-CG.5-10 Cable gland, 1/2-inch NPT, 10 pack

7, 8

Small Fiberglass Enclosure Kit BWA-EF866KIT

This small enclosure kit includes the 8” × 6” × 6” Fiberglass enclosure and is ideal for a power supply and a radio board module.

Part No: 30412

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

10 P/N 159279 Rev. C

SureCross® Antenna and Enclosure Kits

Additional Antenna Cables

For specific instructions describing how to create a weatherproof antenna connection, refer to either the SureCross Wireless I/O Product

Manual (p/n 132607), the SureCross Installation Guide (p/n 151514), or Antenna Basics (p/n 132113).

Part No Model No Description

77486 BWC-1MRSMN05 LMR100 RP-SMA to N Male, 0.5M

77820 BWC-1MRSMN2 LMR100 RP-SMA to N Male, 2M

Use these cables to connect a Gateway or Node to an N-type antenna, N-type antenna

extension cable, or N-type surge suppressor.

These cables are typically used either inside an enclosure to connect the radio to an

external antenna or to extend an external antenna outside the enclosure. They can also be

used with a radio not mounted in an enclosure.

Part No Model No Description

78544 BWC-1MRSFRSB0.2 RG58, RP-SMA to RP-SMAF Bulkhead, 0.2M

78337 BWC-1MRSFRSB1 RG58, RP-SMA to RP-SMAF Bulkhead, 1M

78338 BWC-1MRSFRSB2 RG58, RP-SMA to RP-SMAF Bulkhead, 2M

77488 BWC-1MRSFRSB4 RG58, RP-SMA to RP-SMAF Bulkhead, 4M

Use these cables to connect a Gateway or Node to a bulkhead surge suppressor or a

bulkhead surge suppressor to an RP-SMA antenna.

These cables are typically used either inside an enclosure to connect the radio to an

external antenna or to extend an external antenna outside the enclosure. They can also be

used with a radio not mounted in an enclosure.

Part No Model No Description

77489 BWC-4MNFN3 LMR400 N Male to N Female, 3M

77490 BWC-4MNFN6 LMR400 N Male to N Female, 6M

77821 BWC-4MNFN15 LMR400 N Male to N Female, 15M

77822 BWC-4MNFN30 LMR400 N Male to N Female, 30M

These cables are antenna extension cables, connecting an N-type antenna, N-type surge

suppressor, or to another N-type antenna cable.

These cables are usually used outside the enclosure to extend the distance between the

radio and the antenna.

P/N 159279 Rev. C 11

Banner Engineering Corp. • Minneapolis, MN U.S.A

www.bannerengineering.com • Tel: 763.544.3164

SureCross® Antenna and Enclosure Kits

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]

SureCross® Antenna and Enclosure Kits

P/N 159279 Rev. C

The manufacturer does not take responsibility for the violation of any warning listed in

this document.

CAUTION. Make no modifications to this product. Any modifications to this

product not expressly approved by Banner Engineering could void the user’s

authority to operate the product. Contact the Factory for more information.

Lightning Arrestors/Surge Protection. Always use lightning arrestors/surge protection

with all remote antenna systems to avoid invalidating the Banner Engineering Corp.

warranty. No surge protector can absorb all lightning strikes. Do not touch the

SureCross device or any equipment connected to the SureCross device during a

thunderstorm.

All specifications published in this document are subject to change. Banner reserves

the right to modify the specifications of products, prior to their order, without notice.

Banner Engineering reserves the right to update or change documentation at any time.

For the most recent version of any documentation, please refer to our website: www.

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will

repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This

warranty does not cover damage or liability for misuse, abuse, or the improper application of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE

TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL

DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE,

TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp.

For more information: Contact your local Banner representative or Banner Corporate Offices around the world.

Corporate Headquarters:

Banner Engineering Corp.

9714 Tenth Ave. North

Minneapolis, MN 55441

Tel: 763-544-3164

www.bannerengineering.com

[email protected]

Europe

Banner Engineering Europe

Park Lane