Xvision Elite Quick Manual

Brand: Xvision

Model: Elite

Category: Routers

Type: Quick Manual

Professional HD IP NVR

Elite NVR Quick Guide

Version 1

Thank you purchasing the ELITE NVR from Xvision.

Please ensure that you read and understand this User Guide before operating the NVR.

Please store this User Guide in an easily accessible location.

1080p

Compatible

POWER OVER ETHERNET

PoE

1.Power Switch(Only the 4CH NVR)

Switch to turn the NVR ON & OFF.

2.VGA Output (Video Graphic Array)

15-pin D-sub connector for the analogue VGA output.

3.Audio Inputs

RCA connectors for the audio signal inputs. (Line In)

4.Power In

12V DC Power socket.

5.Alarm(Sensor) Inputs, RS-485, and Relay Output

 Alarm inputs x 4

 RS-485 Signals. (G: Ground, D+: RX/TX + signal,

D-: RX/TX- signal)

 4CH NVR: Relay output for the relay 1 (NO:

Normal Open, NC: Normal Closed, CM: Common)

 8&16CH NVR: Relay output for the relay 2 (NO:

Normal Open, NC: Normal Closed, CM: Common)

6.Rear USB 2.0(Only the 4CH NVR)

 USB 2.0 ports. Provides functions like ‘Copy to USB

storage’, ‘Mouse’ etc.

 7.DIGITAL VIDEO OUT

 Digital video output for the main monitor.

 8. CVBS Monitor Output

 Composite video output for the main live screen or the

spot screen. (BNC)

Rear panel view

10 13

4567

1112

[Rear panel of 4CH NVR]

6 78

111213

[Rear panel of 8 & 16CH NVR]

3 5

212

8910

11 513 14

[Rear panel of premium 8/16/32CH NVR]

Quick Guide

9.RJ-45 Network Port( 1G Base-T)

Network port is used for 1G base-T, PC application software or

Mobile application.

10. RJ-45 Local Port (1G Base-T)

Connection between IP camera and NVR through this port if using

local network already installed.

IP address will be automatically assigned as 192.168.172.100.

11.RJ-45 Cam(PoE) Port (100M Base-T)

Connection between IP camera and NVR as peer to peer mode (direc

t connection). IP address will be assigned in the range of 192.168.172

.101 ~ 8, automatically. (4CH NVR: 4port / 8&16 NVR: 8port)

12.Audio Outputs

RCA connectors for the audio signal outputs. (Line out)

13.POE Power In (48V)

DC Power socket for POE Power.

14.eSATA Connection Port(Optional)

Connect e-SATA storage to expand HDD

IP Camera Connection

Auto(using the PoE Port) Mode

To two ways to connect IP cameras to the Elite NVR.

1) Connect directly to the rear of the Elite NVR,

using a Cat5/6 Patch cable.

The Elite NVR can Auto IP address the IP cameras

connected to the rear POE ports.

For further information, please refer to the manual.

Manual (Using the local or Ethernet ports) Mode

2) If you have your own Switch/Hub/Router and have IP

cameras connected to it, you can use either the Local or the

Ethernet ports. Connect the Elite NVR from one of these ports

using a Cat5/6 Patch cable into your Switch/Hub or Router.

When using this connection you will need to make sure that

the Elite NVR has an IP address set within your existing LAN.

For further information, please refer to the manual.

Toolbox

Current date, Time, user ID

Network connection

Backup device

Auto Sequence

HDD Location

Audio Channel

Log Off

Main Menu

VA Menu

Copy

Search/Copy

Display/Sequence

PTZ

D-Zoom

Log List

Live Screen

Once you have booted the Elite NVR, fill in ID, password

then click confirm button.

If auto login was selected already, log in window is

not displayed.

Factory default ID is ADMIN, Password is 1234

Operation

Left Click: select image

Right: Activate Pop-up Menu

Double click: Double click certain screen, will change view

to full screen.

Drag: On full screen, Press left button of mouse and drag, to

zoom in on image.

Search/Copy

④Playback Hour

Select

⑤Playback Minute Select

⑥Select Second

Playback time/Camera title

-Note-

Yellow Box: follow the instructions to perform search and playback.

Purple: follow the instructions to perform copy

①Select Search

Condition

②Recorded

Date(Blue

Marked)

③Select Date

for Search

①Copy start: select start

time with mouse left click in

the minute select bar, click

right button of mouse and

select the start or end time

②File name for

copy

③Select channel

for copy

④Copy/Start

Control the Play

mode

Exit

Camera Connection

Configuration of the Network

Web Viewer

Operation

Using Internet explorer, connect to the web-server

including on recorder as below. The Web viewer is

operated by Active-x controls.

If you want other web browser besides Internet

explorer, refer to user manual extra set up is

required.

Connecting a IP Camera

Follow the below steps to add a IP Camera

Network setup with automatic IP setup

Select “ON” for Automatic IP address.

Xvision Elite Mobile CMS

Android phone – find “Xvision Elite Mobile CMS” in market play store and install.

iphone – find “Xvision Elite Mobile CMS” in app store and install.

Simple connection : P2P connection

Along with simple scanning QR code in menu, without any setting for IP, port, IP set up is completed in mobile app. See below

steps.

Push alarm: If event triggered in Elite NVR, push notification can be received in mobile APP, For further information, please

refer to the manual.

TECHNICAL SUPPORT

For technical support, please contact your local distributor.

Alternatively, 0871 222 1430

LIMITED WARRANTY

This product is supplied with a 12 month warranty (extendable to 3 years).

The warranty excludes products that have been misused (including accidental damage)

and damage caused by normal wear and tear. In the unlikely event that you encounter a

problem with this product, it should be returned to the place of purchase.

Manufactured exclusively for:

Xvision UK, Unit 2 Valley Point, Beddington Farm Road, Croydon, Surrey CR0 4WP

www.xvision.com

Xvision Elite Quick Manual

Brand: Xvision

Model: Elite

Category: Routers

Type: Quick Manual

Download PDF

report

Xvision Elite Quick Manual

Xvision Elite Quick Manual

Related papers

Other documents