Swann NVRx-7090 Hardware Quick Start Manual

Brand: Swann

Model: NVRx-7090

Type: Hardware Quick Start Manual

Connect to your TV/Monitor via HDMI cable

Getting to know your NVR

Connect the Cameras Connect the Power Adapter

Using one of the long Ethernet cables provided, connect the camera’s Video LAN port to any of

the Camera PoE ports on the back of your NVR. Your NVR delivers power directly to the camera

through the Ethernet cable so the camera does not need any power adapter. Repeat this step

until you have added all the cameras to your NVR.

Connect the power cable to your NVR and plug it into a wall outlet.

Now it’s time to power up your NVR. Press the power switch to the <|> (ON) position to turn it

on.

Connect to your Router

Connect one end of the supplied HDMI cable to the HDMI port on the back of your NVR, and

then connect the other end to a spare HDMI input on your TV or monitor.

Pay attention to the labels on the back of your TV or monitor. It’ll indicate the HDMI input

number that you’ll want to select on your TV or monitor to view your NVR once you switch on

your NVR.

HDMI cable

Router

To connect your NVR to the Internet for remote viewing, connect one end of the short Ethernet

cable to the Network (LAN) port on the back of your NVR, and then connect the other end to a

spare port on your Internet-connected router.

Connect the Mouse

Congratulations on your purchase of Swann’s latest NVR security system! This guide will show

you how to connect your cameras, TV and other peripherals to the NVR in a few easy steps.

You can also use the visual guide on the other side to quickly connect various devices to the

connectors on the NVR.

Before installing anything permanently, connect everything up and test the system - just to

make sure nothing was damaged during shipping!

If your TV or monitor doesn’t have an HDMI port, you can connect your TV or monitor to your

NVR via the VGA port instead. Connect one end of a VGA cable (not supplied) to the VGA port on

the back of your NVR, and then connect the other end to the VGA port on your TV or monitor.

All of the same output resolutions are available over VGA as you get with HDMI. Your display

device must be able to support the set resolution or you won’t see anything on screen.

Connect the mouse to your NVR by plugging the mouse USB connector into the USB port on the

back of your NVR.

Connect to your TV/Monitor via VGA cable

VGA cable

Front Panel

When you turn on the NVR for the first time, the Setup Wizard starts automatically. Read the

Wizard Quick Start Guide provided for instructions on how to configure your NVR system.

Besides remote viewing, connecting your NVR to the Internet allows alert notifications to be sent

to your email account and also enables your NVR to automatically maintain accurate date and

time.

Do you want to copy your NVR recordings onto an external device? Just use the front USB port;

It’s compatible with USB flash drives and USB Hard Disk Drives (HDD). It can also be used to

update your NVR’s firmware (if available).

8 Channel

Network Video Recorder

Hardware Quick Start Guide

Welcome!

Lets get started.

QH83MPNVRH150914E | © Swann 2014

Part Description

Power LED Lights up when your NVR is switched on.

HDD LED Blinks when hard drive is active.

Network

Blinks when network connection is active.

USB (Front) Extra USB port to connect a USB flash drive for backing up recordings.

PoE Camera

rts

These are network PoE (Power over Ethernet) ports to connect and power your cameras via

the Ethernet cables.

Audio Input For connecting a microphone to record sounds in your camera surroundings.

Audio Output For connecting speakers to play sounds from a connected microphone.

VGA port For connecting to your TV using a VGA cable (not supplied).

HDMI port For connecting to your TV using the HDMI cable.

USB port For connecting a USB storage device to back up recordings.

Network

For connecting to your home network router for Internet connectivity using the Ethernet cable.

Power Input For connecting the power adapter.

Power

itch

Switches the power of the NVR on and off. Pressing the switch to the <|> position turns it on

and pressing it to the <0> position turns it off.

Power Status LED

HDD Status LED

Network Status LED

USB (Front)

Overview

Back Panel

PoE Camera

ports

Audio input

Network

port

Audio output

VGA port

HDMI port

USB port

Power input

Power switch

Ethernet cable

Video (LAN) port

Power plug (not used)

Power Cable

Mouse

Ethernet cable

What are the

additional

connections for?

Audio In: Connect to a

microphone

Audio Out: Connect to

TV or speakers

Power

VGA cable

Ethernet

cable

Mouse

Monitor

Your Internet Router/

Wireless Router

HDMI

cable

Ethernet cable

Camera

Video LAN port

Power plug (not used)

Swann NVRx-7090 Hardware Quick Start Manual

Swann NVRx-7090 Hardware Quick Start Manual

Swann NVRx-7090 Hardware Quick Start Manual

Related papers

Other documents