MIDI messages that can be transmit-
ted/received
The most important MIDI messages the AX-Synth can
transmit and receive are:
MIDI messages that can be transmit-
ted/received
The most important MIDI messages the AX-Synth can
transmit and receive are:
Message Remarks
Note On/Off
Velocity
Transmission: striking force of the AX-Synth’s
keys
Aftertouch
Transmission: channel aftertouch via
[AFTER¥TOUCH]
knob (not from the key-
board). Reception: polyphonic & channel
aftertouch.
Program Change
Transmission also without changing sounds
on AX-Synth
Bank Select
Transmission: cannot be specified on the
AX-Synth.
Pitch Bend
Transmission: TOUCH CONTROLLER and/or
D Beam
Modulation
CC01, transmission: MODULATION BAR
Volume
CC07, transmission:
[VOLUME]
knob
Hold/Sustain
CC64,
[HOLD]
button & optional footswitch
connected to
[FOOT¥PEDAL]
CC01~31, CC33~95
Transmission: the control change number
assigned to the D BEAM
[ASSIGNABLE]
but-
ton.
Message Remarks
Note On/Off
Velocity
Transmission: striking force of the AX-Synth’s
keys
Aftertouch
Transmission: channel aftertouch via
[AFTER¥TOUCH]
knob (not from the key-
board). Reception: polyphonic & channel
aftertouch.
Program Change
Transmission also without changing sounds
on AX-Synth
Bank Select
Transmission: cannot be specified on the
AX-Synth.
Pitch Bend
Transmission: TOUCH CONTROLLER and/or
D Beam
Modulation
CC01, transmission: MODULATION BAR
Hold/Sustain
CC64,
[HOLD]
button & optional footswitch
connected to
[FOOT¥PEDAL]
CC01~31, CC33~95
Transmission: the control change number
assigned to the D BEAM
[ASSIGNABLE]
but-
ton.
r®
Erratum
To our regret, the AX-Synth owner’s manual requires the following correction.
Page 27, table in the left column
The AX-Synth’s
[VOLUME]
knob cannot transmit MIDI messages, because it is analog.
We apologize for the inconvenience this may cause.
602.00.0399 RES 747-09 AX-Synth Erratum - E
Please delete
this row.
(Old version in the owner’s manual.) (Correct version.)
AX-Sth_Erratum2.fm Page 1 Monday, October 5, 2009 4:16 PM
