2. J-B Weld
  3. 40001
40001

J-B Weld 40001, 40001-6 User guide

  • Hello! I am an AI chatbot trained to assist you with the J-B Weld 40001 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is J-B Weld 40001-6?
    What are the benefits of using J-B Weld 40001-6?
    What are some typical applications for J-B Weld 40001-6?
    How do I use J-B Weld 40001-6?
    How do I clean up after using J-B Weld 40001-6?
World's Strongest Bond
™
www.jbweld.com
Technical Data/
Use and Care Sheet
Wood Restore
Liquid Hardener
Revision date:
May 2019
_____________________________________________________________________________________________________________________
DIRECTIONS FOR USE
1. PREPARE SURFACE: Remove all decayed, soft or loose wood. Ensure that wood is dry and free of dust,
grease, oil and loose paint.
2. APPLICATION: Shake can well. Using a disposable brush, saturate wood with product. Do not thin or dilute J-
B Weld® Wood Restore Liquid Hardener. For added strength, apply several coats, sanding between each
layer. Allow 2-4 hours to dry before filling with J-B Weld® Wood Restore Repair Putty. After applying wood
filler, sand, paint or stain to complete project.
3. CLEAN-UP: Brush can be cleaned with Acetone.
Transportation Information:
This product ships as non-regulated
Prop-65:
NO
GENERAL INFORMATION
The companion product to #40001 J-B Weld® Wood Restore Liquid Hardener is #40003 J-B Weld® Wood Restore Repair Putty or #40005/
40006/ 40007 J-B Weld® Wood Restore Premium Epoxy Putty.
DISCLAIMER
The information and recommendations contained herein are based on our research and are believed to be accurate,
but no warranty, express or implied, is made or should be inferred. Purchasers should test the products to
determine acceptable quality and suitability for their own intended use.
Part Number
Container Size
40001
16 FL. OZ. (474 mL)
PRODUCT BENEFITS
• Easy Brush-On Application
• No Mix Formula
• Quick Drying
• Reduces Moisture in Rotted Wood
• Forms Solid Base for Filling
• Made in USA
TYPICAL APPLICATIONS
• Windowsills
• Door Frames
• Sashes
• Floors
• Columns
• Posts & More
PRODUCT BRIEF
J-B Weld® Wood Restore Liquid Hardener is a quick drying liquid sealer for stabilizing and reinforcing decayed or rotted wood
prior to filling. This special liquid formula reduces moisture and penetrates wood to reinforce fibers, providing a solid base for
filling with J-B Weld® Wood Restore Repair Putty or Premium Epoxy Putty. After applying wood filler, sand, paint or stain to
complete project.
/