Speakman S-2292 Dimensions Guide

Type
Dimensions Guide
THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.
400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720
P: 800-537-2107 | F: 800-977-2747
WWW.SPEAKMANCOMPANY.COM
REVISION DATE: JANUARY 2014
SPECIFICATION
259
Management Systems
Registered to ISO 9001
SEE REVERSE FOR ROUGH-IN DIMENSIONS
SPEAKMAN
®
Commercial Showerhead
S-2292
FEATURES:
1¾ in. brass shank
• Spray adjusting T-handle.
• Brass ball swivel joint.
Flow control device reduces ow to 2.5 gpm/9.46
L/min maximum
COMPLIANCE:
Meets existing ASME A112.18.1/CSA B125.1
Standard
FINISH:
• Polished Chrome (standard)
WARRANTY:
1 year limited
THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.
400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720
P: 800-537-2107 | F: 800-977-2747
WWW.SPEAKMANCOMPANY.COM
REVISION DATE: JANUARY 2014
SPECIFICATION
260
NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are
subject to change without notice.
Management Systems
Registered to ISO 9001
SPEAKMAN
®
Commercial Showerhead S-2292
1/11
92-3208
Rev-1
SPEAKMAN
®
PO Box 191 Wilmington, DE 19899 Phone: 800-537-2107 Fax: 800-977-2747
Visit us on the web at www.speakmancompany.com
SPEAKMAN COMPANY
S-2292 Installation, Maintenance & Operation Instructions
CHROME PLATED BRASS SHOWERHEAD
DESCRIPTION
Polished chrome plated brass showerhead. Brass ball swivel joint. 1-3/4” chrome plated brass shank with brass
spray face. Spray adjusting T-handle. Flow control device reduces flow to 2.5 GPM/9.46LPM maximum, to meet
existing ANSI A112.18.1 Standard. Vandal resistant standard. ½” NPT inlet.
SPECIFICATIONS
SUPPLY INLET: ½” NPT
FLOW RATE: 2.5 GPM/9.46LPM MAXIMUM
FLOW CONTROL: FIXED
SHIPPING WEIGHT: 2.90 LBS.
INSTALLATION
Apply pipe thread tape in a clockwise direction to threads of shower arm. Pipe joint compound may be used instead
of tape. Turning in a clockwise direction, thread the shower head on to the shower arm. Tighten with a pipe wrench
or a pair of pliers. Position the shower head by rotating it clockwise. Make sure the ball joint coupling is properly
tightened. Turn the water supply on and check for leaks.
OPERATION
To adjust the spray pattern of the shower head, simply rotate the T-handle to the desired spray.
MAINTENANCE
BPT: British Pipe Thread
VR: Vandal Resistant
Product improvements may
cause specification and
dimensional changes
without notice.
The gleaming finish of your SPEAKMAN chrome plated brass showerhead can be cleaned by using mild soap and
warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to 2.5
gallons per minute. The small orifice may become clogged with scale and other minerals found in potable water. To
clean the flow control, simply remove the shower head from the bent arm, unscrew the flow control and clean as
necessar
y
.
OPTIONS
ROUGH-IN MEASUREMENTS
  • Page 1 1
  • Page 2 2

Speakman S-2292 Dimensions Guide

Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages