2. Toro
  3. 1in Pin Tow Pole Hitch, End-Dump Concrete Mixer
1in Pin Tow Pole Hitch, End-Dump Concrete Mixer

Toro 1in Pin Tow Pole Hitch, End-Dump Concrete Mixer, 68130, Pintle Tow Pole Hitch, End-Dump Concrete Mixer, Stamped Tow Pole Hitch, End-Dump Concrete Mixer Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 1in Pin Tow Pole Hitch, End-Dump Concrete Mixer Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3379-218RevA
TowPoleHitch
forEnd-DumpConcreteMixers
ModelNo.68130
ModelNo.68131
ModelNo.68132
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocatednear
anyareaofpotentialdanger.Replaceany
decalthatisdamagedorlost.
125–8216
1.ReadtheOperator’s
Manualforinformationon
howtotowthemachine.
2.Warning—limittowing
speedtolessthan55mph
/88km/h.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3379-218*A
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Towpole1
Frontstabilizerleg(shippedwiththe
machine)
1
Shortbolt
6
Longbolt1
1
Locknut
7
Installthetowpole.
Hitchassembly1
Flange-headbolt2
2
Locknut2
Installthehitchassembly.
Safetychain
1
3
Connectinglink
2
Installthesafetychainandconnecting
links.
1
Partsneededforthisprocedure:
1Towpole
1
Frontstabilizerleg(shippedwiththemachine)
6
Shortbolt
1Longbolt
7
Locknut
Procedure
1.Lowertherearstabilizerlegs;refertothemachine
Operator’sManual.
2.Placejackstandsunderthefrontframerailtoprevent
themachinefromtippingforward(
Figure1).
WARNING
Mechanicalorhydraulicjacksmayfailto
supportthemachineandcauseseriousinjury.
Usejackstandswhensupportingthemachine.
G021091
1
Figure1
1.Supportpoints
3.Removethe2nutsandboltsthatsecurethefront
stabilizerlegtotheframe(
Figure2),andremovethe
frontstabilizerleg.
G021092
1
Figure2
1.Frontstabilizerleg
4.Installthetowpoleintotheopeningatthefrontofthe
machine,andsecureitwith6shortboltsand6locknuts
torquedto102N-m(75ft-lb);referto
Figure3.
2
G023350
Figure3
5.Alignthetoprearholeinthefrontstabilizerleg(Figure
4)totherearmostholenearthehandleatthefront
ofthetowpole.
2
3
1
4
G023351
Figure4
1.Locknut
3.Clevispin
2.Longbolt4.Frontstabilizerleg
6.Installthelongboltthroughtheholes,andsecureit
withalocknuttorquedto102N-m(75ft-lb);referto
Figure4.
Note:Thestabilizerlegpivotsrearwardonthebolt.
Ifyouinstalltheboltintothewronghole,thestabilizer
legwillnotworkproperly.
7.Inserttheclevispin(Figure4)tolockthefront
stabilizerleginposition.
Note:Rotatethestabilizerlegupfortowingthemachine,
anddownwhenthemachineisstationary.Alwaysinsertthe
clevispinthroughtheappropriateholestoensurethatthe
stabilizerlegdoesnotmoveunexpectedly.
2
InstallingtheHitchAssembly
Partsneededforthisprocedure:
1Hitchassembly
2Flange-headbolt
2Locknut
Procedure
1.Using2ange-headboltsand2locknuts,loosely
installthehitchassemblyinthemiddlepositionofthe
mountingplate.
2
4
3
1
G023352
Figure5
Ballhitchshown
1.Locknut(2)3.Flange-headbolt(2)
2.Mountingplate4.Hitchassembly
2.Positionthemachinesothatthetowpoleislevel.
3.Checktherelationshipbetweenthehitchofthe
machineandthehitchofthetowvehicle,andmount
thehitchassemblyin1ofthefollowingpositions:
•Ifthehitchesareapproximatelythesameheight,
keepthehitchassemblyinthemiddlepositionof
themountingplate;refertoFigure6.
•Ifthehitchofthetowvehicleishigh,mountthe
hitchassemblyinthetopposition.
•Ifthehitchofthetowvehicleislow ,mountthe
hitchassemblyinthebottomposition.
3
1
2
3
G023353
Figure6
Ballhitchshown
1.Topposition3.Bottomposition
2.Middleposition
4.Torquethe2nutsand2boltsto102N-m(75ft-lb).
Important:Refertothemachine
Operator’ s Man ual
for
informationabouthitchingandtowingthemachine.
3
InstallingtheSafetyChainand
ConnectingLinks
Partsneededforthisprocedure:
1
Safetychain
2
Connectinglink
InstallingtheSafetyChain
1.Formahookontheendofabendablepieceofrod
orstiffwire(notincluded),andinsertitthroughboth
keyholesinthetowpoleofthemachine(Figure7).
A B
C D
G023355
2
3
4
3
1
Figure7
1.Keyhole
3.Safetychain
2.Rodorwire(notincluded)4.Connectinglink
2.Attachthesafetychaintothelengthofrodorwire
(Figure7).
3.Pulltherod,orwire,andthesafetychainthroughboth
keyholes(Figure7).
Note:Ensurethatapproximatelyequallengthsof
safetychainextendfromeithersideofthetowpole.
4
/