3
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white (blue) fixture wire to the neutral
power line wire with a wire nut.
Connect the black (brown) fixture wire to the hot power
line wire with a wire nut.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
With the allen wrench, tighten the set screws at the
bottom of the fixture to secure it to the mounting plate.
1E
10
11
12
1F
13
14
12
10
11
13
14
15
For wet locations, caulk around the base with
waterproof construction sealant.
1G