LBL Lighting BA840OYSCLED830 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
BA840OYSCLED830
Type
Installation guide
Installation Instructions for
Denton Bath (LED)
980DENTNW
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
This product may be mounted horizontally or vertically.
1
Wall
1.0
BA840, BA841_LED
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Install the Mounting Plate
Remove the fixture screws located on the top and
bottom of the fixture base with the provided Allen
wrench.
Remove the mounting plate from the fixture base.
1
1A
FIXTURE SCREW
1
MOUNTING
PLATE
FIXTURE SCREW
1
2
ALLEN WRENCH
1B
ELECTRICAL BOX
Install the mounting plate onto the electrical box with
the two #8-32 screws provided.
23
#8-32 SCREW
#8-32 SCREW
3
3
2
2A
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2015 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVETHESE INSTRUCTIONS!
4
3
Install the Fixture
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the black driver wire to the hot power line wire
with a wire nut.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Properly place the driver, all wires, and wire nut
connections into the fixture base.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the fixture screws (reversal of
figure 1A).
1
2
3
2
1
5
DRIVER
  • Page 1 1
  • Page 2 2

LBL Lighting BA840OYSCLED830 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
BA840OYSCLED830
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers