Dell Inspiron 3552 User manual

Category
All-in-One workstations
Type
User manual
Inspiron 15
3000 Series
Service Manual (with optical drive)
Regulatory Model: P47F
Regulatory Type: P47F003
December 2020
Rev. A01
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Dell
and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein
may be trademarks of their respective companies.
Chapter 1: Before working inside your computer............................................................................7
Before you begin .................................................................................................................................................................7
Safety instructions.............................................................................................................................................................. 7
Recommended tools........................................................................................................................................................... 8
Chapter 2: After working inside your computer............................................................................. 9
Chapter 3: Removing the battery................................................................................................. 10
Procedure............................................................................................................................................................................ 10
Chapter 4: Replacing the battery..................................................................................................11
Procedure............................................................................................................................................................................. 11
Chapter 5: Removing the optical drive......................................................................................... 12
Prerequisites........................................................................................................................................................................12
Procedure.............................................................................................................................................................................12
Chapter 6: Replacing the optical drive......................................................................................... 14
Procedure.............................................................................................................................................................................14
Post-requisites....................................................................................................................................................................14
Chapter 7: Removing the keyboard.............................................................................................. 15
Prerequisites....................................................................................................................................................................... 15
Procedure............................................................................................................................................................................ 15
Chapter 8: Replacing the keyboard.............................................................................................. 17
Procedure.............................................................................................................................................................................17
Post-requisites....................................................................................................................................................................17
Chapter 9: Removing the base cover............................................................................................18
Prerequisites........................................................................................................................................................................18
Procedure.............................................................................................................................................................................18
Chapter 10: Replacing the base cover.......................................................................................... 21
Procedure.............................................................................................................................................................................21
Post-requisites....................................................................................................................................................................21
Chapter 11: Removing the hard drive........................................................................................... 22
Prerequisites.......................................................................................................................................................................22
Procedure............................................................................................................................................................................22
Chapter 12: Replacing the hard drive........................................................................................... 25
Procedure............................................................................................................................................................................25
Contents
Contents 3
Post-requisites...................................................................................................................................................................25
Chapter 13: Removing the memory module.................................................................................. 26
Prerequisites.......................................................................................................................................................................26
Procedure............................................................................................................................................................................26
Chapter 14: Replacing the memory module.................................................................................. 28
Procedure............................................................................................................................................................................28
Post-requisites...................................................................................................................................................................28
Chapter 15: Removing the wireless card...................................................................................... 30
Prerequisites.......................................................................................................................................................................30
Procedure............................................................................................................................................................................30
Chapter 16: Replacing the wireless card...................................................................................... 32
Procedure............................................................................................................................................................................32
Post-requisites................................................................................................................................................................... 33
Chapter 17: Removing the power-button board............................................................................34
Prerequisites.......................................................................................................................................................................34
Procedure............................................................................................................................................................................34
Chapter 18: Replacing the power-button board........................................................................... 36
Procedure............................................................................................................................................................................36
Post-requisites...................................................................................................................................................................36
Chapter 19: Removing the speakers............................................................................................. 37
Prerequisites....................................................................................................................................................................... 37
Procedure............................................................................................................................................................................ 37
Chapter 20: Replacing the speakers............................................................................................ 38
Procedure............................................................................................................................................................................38
Post-requisites...................................................................................................................................................................38
Chapter 21: Removing the I/O board............................................................................................39
Prerequisites.......................................................................................................................................................................39
Procedure............................................................................................................................................................................39
Chapter 22: Replacing the I/O board............................................................................................41
Procedure.............................................................................................................................................................................41
Post-requisites....................................................................................................................................................................41
Chapter 23: Removing the coin-cell battery.................................................................................42
Prerequisites.......................................................................................................................................................................42
Procedure............................................................................................................................................................................42
Chapter 24: Replacing the coin-cell battery.................................................................................43
Procedure............................................................................................................................................................................43
4
Contents
Post-requisites................................................................................................................................................................... 43
Chapter 25: Removing the heat sink............................................................................................ 44
Prerequisites.......................................................................................................................................................................44
Procedure............................................................................................................................................................................44
Chapter 26: Replacing the heat sink............................................................................................ 46
Procedure............................................................................................................................................................................46
Post-requisites...................................................................................................................................................................46
Chapter 27: Removing the system board......................................................................................47
Prerequisites....................................................................................................................................................................... 47
Procedure............................................................................................................................................................................ 47
Chapter 28: Replacing the system board......................................................................................51
Procedure............................................................................................................................................................................ 51
Post-requisites....................................................................................................................................................................51
Chapter 29: Removing the touch pad...........................................................................................52
Prerequisites.......................................................................................................................................................................52
Procedure............................................................................................................................................................................52
Chapter 30: Replacing the touch pad.......................................................................................... 55
Procedure............................................................................................................................................................................55
Post-requisites...................................................................................................................................................................55
Chapter 31: Removing the power-adapter port............................................................................ 56
Prerequisites.......................................................................................................................................................................56
Procedure............................................................................................................................................................................56
Chapter 32: Replacing the power-adapter port............................................................................58
Procedure............................................................................................................................................................................58
Post-requisites...................................................................................................................................................................58
Chapter 33: Removing the display assembly................................................................................ 59
Prerequisites.......................................................................................................................................................................59
Procedure............................................................................................................................................................................59
Chapter 34: Replacing the display assembly................................................................................ 62
Procedure............................................................................................................................................................................62
Post-requisites...................................................................................................................................................................62
Chapter 35: Removing the display bezel...................................................................................... 63
Prerequisites.......................................................................................................................................................................63
Procedure............................................................................................................................................................................63
Chapter 36: Replacing the display bezel...................................................................................... 65
Procedure............................................................................................................................................................................65
Contents
5
Post-requisites...................................................................................................................................................................65
Chapter 37: Removing the display panel...................................................................................... 66
Prerequisites.......................................................................................................................................................................66
Procedure............................................................................................................................................................................66
Chapter 38: Replacing the display panel...................................................................................... 68
Procedure............................................................................................................................................................................68
Post-requisites...................................................................................................................................................................68
Chapter 39: Removing the camera...............................................................................................69
Prerequisites.......................................................................................................................................................................69
Procedure............................................................................................................................................................................69
Chapter 40: Replacing the camera............................................................................................... 71
Procedure.............................................................................................................................................................................71
Post-requisites....................................................................................................................................................................71
Chapter 41: Removing the display hinges..................................................................................... 72
Prerequisites....................................................................................................................................................................... 72
Procedure............................................................................................................................................................................ 72
Chapter 42: Replacing the display hinges.................................................................................... 74
Procedure............................................................................................................................................................................ 74
Post-requisites................................................................................................................................................................... 74
Chapter 43: Removing the palm rest............................................................................................75
Prerequisites.......................................................................................................................................................................75
Procedure............................................................................................................................................................................75
Chapter 44: Replacing the palm rest............................................................................................ 77
Procedure............................................................................................................................................................................ 77
Post-requisites................................................................................................................................................................... 77
Chapter 45: Flashing the BIOS.....................................................................................................78
Chapter 46: Getting help and contacting Dell.............................................................................. 79
6
Contents
Before working inside your computer
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
Before you begin
Safety instructions
Recommended tools
Before you begin
1. Save and close all open files and exit all open applications.
2. Shut down your computer.
Windows 10: Click or tap Start >
Power > Shut down.
Windows 8.1: On the Start screen, click or tap the power icon > Shut down.
Windows 7: Click or tap Start > Shut down.
NOTE:
If you are using a different operating system, see the documentation of your operating system for shut-down
instructions.
3. Disconnect your computer and all attached devices from their electrical outlets.
4. Disconnect all cables such as telephone cables, network cables and so on, from your computer.
5. Disconnect all attached devices and peripherals, such as keyboard, mouse, monitor, and so on, from your computer.
6. Remove any media card and optical disc from your computer, if applicable.
Safety instructions
Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety.
NOTE:
Before working inside your computer, read the safety information that shipped with your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
NOTE: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to the power source.
CAUTION: To avoid damaging the computer, ensure that the work surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle them by their edges and avoid touching pins
and contacts.
CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical
assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the
safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity, which could harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some
cables have connectors with locking tabs or thumb-screws that you must disengage before disconnecting
1
Before working inside your computer 7
the cable. When disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When
connecting cables, ensure that the ports and connectors are correctly oriented and aligned.
CAUTION: Press and eject any installed card from the media-card reader.
Recommended tools
The procedures in this document may require the following tools:
Phillips screwdriver
Plastic scribe
8 Before working inside your computer
After working inside your computer
CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.
1. Replace all screws and ensure that no stray screws remain inside your computer.
2. Connect any external devices, peripherals, and cables you removed before working on your computer.
3. Replace any media cards, discs, and any other parts that you removed before working on your computer.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
2
After working inside your computer 9
Removing the battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Procedure
Procedure
1. Close the display and turn the computer over.
2. Slide the battery-release latch to the unlocked position.
3. Lift the battery at an angle and remove the battery from the battery bay.
a. battery
b. battery-release latch
4. Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
3
10 Removing the battery
Replacing the battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Procedure
Procedure
1. Close the display and turn the computer over.
2. Place the battery in the battery bay and snap the battery into place.
NOTE: The battery-release latch returns to the locked position if the battery is installed properly.
4
Replacing the battery 11
Removing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Prerequisites
Procedure
Prerequisites
Remove the battery.
Procedure
1. Remove the screw that secures the optical-drive assembly to the base cover.
2. Using a plastic scribe, push the optical-drive assembly out of the optical-drive bay.
3. Pull the optical-drive assembly out of the optical-drive bay.
1.
optical-drive assembly 2. plastic scribe
3. screw 4. base cover
4. Carefully pry the optical-drive bezel off the optical drive.
5. Remove the screw that secures the optical-drive bracket to the optical drive.
NOTE: Note the orientation of the optical-drive bracket so that you can replace it correctly.
5
12 Removing the optical drive
1. screw 2. optical drive
3. optical-drive bezel 4. optical-drive bracket
Removing the optical drive 13
Replacing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Procedure
Post-requisites
Procedure
1. Align the screw hole on the optical-drive bracket with the screw hole on the optical drive.
NOTE: You must correctly align the optical-drive bracket to ensure that the optical drive can be properly secured to the
computer. For correct orientation, see step 5 in Removing the optical drive.
2. Replace the screw that secures the optical-drive bracket to the optical drive.
3. Align the tabs on the optical-drive bezel with the slots on the optical drive and snap the optical-drive bezel into place.
4. Slide the optical-drive assembly into the optical-drive bay.
5. Replace the screw that secures the optical-drive assembly to the base cover.
Post-requisites
Replace the battery.
6
14 Replacing the optical drive
Removing the keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Prerequisites
Procedure
Prerequisites
Remove the battery.
Procedure
1. Turn the computer over and open the display.
2. Using a plastic scribe, gently release the tabs that secure the keyboard to the palm-rest assembly.
3. Slide the keyboard up to release it from the slots on the palm-rest assembly.
4. Carefully turn the keyboard over and place it on the palm-rest assembly.
1.
tabs (5) 2. plastic scribe
7
Removing the keyboard 15
3. keyboard 4. slots (6)
5. palm-rest assembly
5. Open the latch and disconnect the keyboard cable from the system board.
1. latch 2. keyboard cable
3. keyboard 4. palm-rest assembly
6. Lift the keyboard, along with the cable, off the palm-rest assembly.
16
Removing the keyboard
Replacing the keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Procedure
Post-requisites
Procedure
1. Slide the keyboard cable into the system-board connector and close the latch to secure the cable.
2. Carefully turn the keyboard over, slide the tabs on the keyboard into the slots on the palm-rest assembly, and snap the
keyboard into place.
3. Close the display and turn the computer over.
Post-requisites
Replace the battery.
8
Replacing the keyboard 17
Removing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
Prerequisites
Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in Removing the optical drive.
3. Remove the keyboard.
Procedure
1. Open the display and remove the screws that secure the palm-rest assembly to the base cover from its connector on the
system board.
2. Open the latch and disconnect the optical-drive cable from its connector on the system board.
1.
screws (5) 2. palm-rest assembly
3. base cover 4. optical-drive cable
9
18 Removing the base cover
5. latch
3. Close the display and turn the computer over.
4. Remove the screws that secure the base cover to the palm-rest assembly.
a. screws (13)
b. base cover
c. palm-rest assembly
5. Using your fingertips, gently pry the base cover off the palm-rest assembly.
a. base cover
b. palm-rest assembly
6. Turn the base cover over.
7. Release the optical-drive interposer from the tabs on the base cover.
Removing the base cover
19
1. base cover 2. optical-drive interposer
3. tabs (2) 4. optical-drive cable
20 Removing the base cover
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79

Dell Inspiron 3552 User manual

Category
All-in-One workstations
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI