Symmons 442HSB-LHS Installation guide

Symmons
Brand
Symmons
Model
442HSB-LHS
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Symmons 442HSB-LHS is a 3-mode hand shower unit that offers a variety of features for a customized showering experience. With its 3-1/4" diameter hand shower head, you can enjoy a wide, luxurious spray. The unit also includes dual checks for backflow protection, ensuring that water flows in only one direction. The 30" slide bar with cradle provides a convenient and secure way to mount the hand shower, while the 60" flexible metal hose allows for easy reach and maneuverability.

Symmons 442HSB-LHS is a 3-mode hand shower unit that offers a variety of features for a customized showering experience. With its 3-1/4" diameter hand shower head, you can enjoy a wide, luxurious spray. The unit also includes dual checks for backflow protection, ensuring that water flows in only one direction. The 30" slide bar with cradle provides a convenient and secure way to mount the hand shower, while the 60" flexible metal hose allows for easy reach and maneuverability.

Model Numbers Feature Highlights
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
3 Mode Hand Shower Unit
Installation Guide
442HSB
Options/Modifications
Compliance
☐442HSB 3 Mode Hand Shower Unit • 3 mode hand shower
• 3-1/4" diameter hand shower head
• Dual checks for backow protection
• 30" slide bar with cradle for hand shower mounting
• 60" exible metal hose
• Standard 2.5 gpm (9.5 L/min) ow restrictor
• Shall be metal and nonmetallic construction, plated in
standard polished chrome nish
Note: Append appropriate -sufx to model number.
☐-1.5 1.5 gpm (5.7 L/min) flow restrictor
☐-2.0 2.0 gpm (7.6 L/min) flow restrictor
☐-LHS Less hand shower wand
☐-STN Satin Nickel finish
- ASME A112.18.1/CSA B125.1
CG
Dimensions
Measurements
A Ø 1-1/2", 38 mm
B 2-1/8", 54 mm
C 28-9/16", 725 mm
D(2x) Hole Size:
Ø 1/4", 6 mm
E 3", 76 mm
F
Male 1/2-14 NPT tting must
be recessed 1/4" (6 mm)
from nished wall
Note: Dimensions subject to change without notice.
FLOORFLOOR
EE
B
C
A
FF
D
Canterbury®
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-3270 REV 0 ■ 102618
GH
AB
C
D
E
A
B
C
D
I
F
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed ush to the nished wall.
2) Apply plumber tape to all threaded connections.
Parts Breakdown
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Replacement Parts
Item Description Part Number
A
B
C
D
(2x) Cap
(2x) Screw
(2x) Bar End
(2x) Tile Anchor
RA-003
E30" Bar
48" Bar
RA-005
RA-006
F Hand Shower 442W
G 60" Hose EF-02976
H Wall Elbow EF-105
I Slide Assembly RA-004
Tools Required for Installation
Adjustable Wrench
Drill
Phillips Head
Screwdriver
Plumber Tape
Silicone
  • Page 1 1
  • Page 2 2

Symmons 442HSB-LHS Installation guide

Symmons
Brand
Symmons
Model
442HSB-LHS
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Symmons 442HSB-LHS is a 3-mode hand shower unit that offers a variety of features for a customized showering experience. With its 3-1/4" diameter hand shower head, you can enjoy a wide, luxurious spray. The unit also includes dual checks for backflow protection, ensuring that water flows in only one direction. The 30" slide bar with cradle provides a convenient and secure way to mount the hand shower, while the 60" flexible metal hose allows for easy reach and maneuverability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers