2. Porter
  3. 19mm Corrugated Scavenger Hose

Porter 19mm Corrugated Scavenger Hose Assembly Instructions

  • I have reviewed the document regarding the 19mm Corrugated Scavenger Hose assembly instructions. This document explains how to connect the hose to the Nitronox Scavenger and the Scavenger Collector Manifold, secure it with ties, and replace it. I'm ready to answer any questions you might have about the assembly process or the device itself.
  • How do I connect the 19mm Corrugated Hose to the Nitronox Scavenger?
    What do I do after connecting the 19mm Scavenger Hose to Nitronox Scavenger?
    How do I secure the 19mm Corrugated Hose?
    How do I replace the 19mm Corrugated Scavenger Hose?
Parker Hannifin Corporation REF: 92120041
Porter Instrument 19mm Corrugated Scavenger
245 Township Line Road Hose Assembly Instructions
Hatfield, PA 19440
Office 215 723 4000
Fax 215 723 5106
Contents:
19mm Corrugated Hose
5 Ties (Plastic illustrated
Or Hook and Loop provided)
1: Firmly push one end of 19mm Corrugated
Hose onto the Nitronox Scavenger.
2: Connect the Scavenger Collector Manifold
to the Nitrous Oxide Demand Valve.
3: Connect the 19mm Corrugated Hose to the Scavenger
Collector Manifold and align parallel with Fresh Gas
Delivery Hose.
4: Fasten Plastic Ties (or Hook & Loop)
starting a couple of inches below the
Demand Valve and then approximately
every 12 inches.
5: When replacing 19mm Corrugated
Scavenger Hose, carefully cut plastic ties
with scissors (or remove Hook & Loop Ties).
The Quality System for Porter Instrument is certified to ISO 13485.
Check our website: www.porterinstrument.com/nitronox
To register your product: www.porterinstrument.com/resources-dental choose Warranty tab.
To download a User’s Manual: www.porterinstrument.com/resources-dental choose Manuals tab
FM-1236 Rev F 01/22
/