2. Econoco
  3. PSBBADJ

Econoco PSBBADJ User guide

  • Hello! I'm your chat assistant and I've reviewed the user manual for the PSBBADJ garment rack. This document contains instructions on how to assemble the rack, starting with the casters and base, and describes how to adjust the height. I'm ready to answer your questions about it.
  • What tools are included with the garment rack?
    How many casters are included?
    How to tighten bottom uprights?
ASSEMBLED VIEW
WRENCH
ALLEN KEY
HANGBAR
QTY. 1
TOP UPRIGHT
QTY. 2
ADJUSTABLE
CONNECTOR
QTY. 2
BOTTOM
UPRIGHT
QTY. 2
CASTER (WITH
FLAT WASHER
AND LOCK
WASHER)
QTY. 4 SETS
BASE
QTY. 1
EXPLODED VIEW
STEP 2A
STEP 2B
CASTER
LOCK WASHER
FLAT WASHER
TOOLS INCLUDED
ASSEMBLY
INSTRUCTIONS FOR:
PSBBADJ
SCREW IN THE CASTERS TO THE BASE AS SHOWN USING PROVIDED WRENCH.
STEP 2A
BY HAND, SCREW IN BOTTOM UPRIGHTS.
STEP 2B
TO FULLY TIGHTEN UPRIGHT, PLACE
INCLUDED WRENCH INTO PIPE SLOTS AS
SHOWN. TIGHTEN FULLY
SHEET 1 OF 2
PSBBADJ
1
2
SET SCREW
P
TIGHTEN
LOOSEN
TIGHTEN SET SCREW USING
THE ALLEN KEY TO LOCK
ADJUSTABLE CONNECTOR IN
PLACE.
BY HAND, SCREW
ADJUSTABLE CONNECTOR
TO BOTTOM UPRIGHTS.
ADJUST SO THAT HAND
WHEELS ALIGN TO THE
OUTSIDE (AS SHOWN ON
THE LEFT.)
WITH ALLEN KEY, SLIGHTLY BACK OUT
SET SCREWS ON ADJUSTABLE
CONNECTOR.
BY HAND, SCREW TOP
UPRIGHTS TO HANGBAR.
LOOSEN HAND WHEEL ON BOTH SIDES
•
DROP HANGBAR INTO DESIRED HEIGHT
•
LOCK IN POSITION BY TIGHTENING THE
•
HAND WHEEL ON BOTH SIDES
SHEET 2 OF 2
PSBBADJ
4
5
3
/