Econoco LNE2W Installation guide

Type
Installation guide
UPPER CROSS BAR
SIDE FRAMES
LOWER CROSS
BAR
HANGBAR
SHORT
COUNTERSUNK
SCREW
IF THE LEVELERS ARE NOT
ALREADY INSTALLED,
INSTALL THEM ONTO THE
LOWER CROSS BARS. THEN,
SECURE THE LOWER CROSS
BARS TO THE ASSEMBLY
FROM STEP 1 WITH THE
REMAINING COUNTERSUNK
SCREWS.
LEVELER
LONG
COUNTERSUNK
SCREW
SECURE THE
HANGBAR TO
THE CROSS BAR
WITH THE LONG
COUNTERSUNK
SCREW AS
SHOWN.
LNE2W ASSEMBLY INSTRUCTIONS
JOIN THE 2 SIDE FRAMES TO
THE UPPER CROSS BAR
USING (4) SHORT
COUNTERSUNK SCREWS.
NOTE:
THE HOLES ON THE
HANGBAR SHOULD BE
FACING UP.
1
2
SHEET 1 OF 1
LNE2W
  • Page 1 1

Econoco LNE2W Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI