Aeg-Electrolux E9871-5-M User manual

  • Hello! I am an AI chatbot trained to assist you with the Aeg-Electrolux E9871-5-M User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
E9871-5
User manual Built-In Electric Oven
Contents2
Contents
Operating Instructions 3
Safety instructions 3
Description of the Appliance 5
General Overview 5
The electronic oven controls 6
Oven Features 8
Oven accessories 9
Before Using for the first time 9
Setting the language 9
Setting the clock 10
Initial cleaning 11
Using the Rings 11
Setting the heat setting 12
Cooking with the automatic
warm up function 12
Automatic cut-out function for the rings 13
Using the Oven 14
Menu operation in overview 14
Use of the oven functions 15
Switching the Oven On and Off 17
Inserting the Combination Shelf,
Baking Tray and Roasting Pan 20
Inserting/Removing the Fat Filter 21
Meat Probe 22
Automatic programmes 24
Options 26
Clock Functions 32
Additional functions 37
Cleaning and Care 38
Outside of the appliance 38
Oven interior 38
Accessories 39
Fat Filter 39
Performing Pyrolytic cleaning 39
Reminder function for pyrolytic cleaning 40
Shelf Support Rails 41
Oven lighting 42
Oven door 43
Oven door glass 45
What to do if … 48
Disposal 49
Service 50
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this instruc-
tion manual carefully. It will enable you to navigate all processes perfectly and most ef-
ficiently.
To refer to this manual any time you need to, we recommend you to keep it in a safe
place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user manual:
1
Important information concerning your personal safety and information on how to
avoid damaging the appliance.
3 General information and tips
2 Environmental information
3Operating Instructions
Operating Instructions
1 Safety instructions
Electrical safety
This appliance must be only connected by a registered electrician.
In the event of a fault or damage to the appliance: Take the fuses out or switch off.
Repairs to the appliance must only be carried out by qualified service engineers.
Considerable danger may result from improper repairs. If repairs become necessary,
please contact our Customer Services or your dealer.
Child Safety
Never leave children unsupervised when the appliance is in use.
The appliance is fitted with a child safety device.
Safety whilst using
People (including children) who, because of their physical, sensory or mental capabili-
ties or their inexperience or ignorance are not able to use the device safely, should not
use this device without supervision or instruction by a responsible person.
This appliance is intended to be used for cooking, roasting and baking food in the
home.
Take care when connecting electric appliances to sockets nearby. Do not allow con-
necting leads to come into contact with or to catch beneath the hot oven door.
Warning: Risk of burns! The interior of the oven becomes hot during use.
Using ingredients containing alcohol in the oven may create an alcohol-air mixture
that is easily ignited. In this case, open the door carefully. Do not have embers, sparks
or naked flames in the vicinity when opening the door.
3 Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in
products containing starch, can constitute a health risk due to acrylamides. Therefore we
recommend cooking at the lowest possible temperatures and not browning foods too
much.
How to avoid damage to the appliance
Do not line the oven with aluminium foil and do not place baking trays, pots, etc. on
the oven floor, as the heat that builds up will damage the oven enamel.
Fruit juices dripping from the baking tray will leave stains, which you will not be able
to remove. For very moist cakes, use a deep tray.
Do not put any strain on the oven door when open.
Never pour water directly into the oven when it is hot. This could cause damage to or
discolouration of the enamel.
Rough handling, especially around the edges of the front panel, can cause the glass to
break.
Safety instructions4
Do not store any flammable materials inside the oven. These could ignite when the
oven is switched on.
Do not store any moist foods inside the oven. This could damage the oven enamel.
After switching off the cooling fan, do not keep uncovered dishes in the oven. Mois-
ture may condense in the oven interior or on the glass doors and may get into the
units.
3 Note on enamel coating
Changes in the colour of the oven’s enamel coating as a result of use do not affect the
appliance’s suitability for normal and correct use. They therefore do not constitute a de-
fect in the sense of the warranty law.
5Description of the Appliance
Description of the Appliance
General Overview
Full glass door
Oven displays
and buttons
Door
handle
Hob Cooking Zone Control Knobs Hob Cooking Zone Control Knobs
Description of the Appliance6
The electronic oven controls
Indicators
Menu status bar
In the menu status bar the current position within a menu is shown by a flashing bar.
When the menu status bar can no longer be seen in the display, the oven begins to heat
or the time set begins to count down.
Symbol status bar
Symbol Function
Door lock Door is locked, Pyroluxe in operation.
RAPID HEAT UP RAPID HEAT UP is in operation.
MEATPROBE MEATPROBE is plugged in.
TRUE FAN
150ûc 12.05
00.06
___________________
Symbol status bar Menu status bar Text line
Temperature Time
Meat core temperature
Clock functions
Period of operation
Heat indicator Shelf positions
7Description of the Appliance
Buttons
Button Function
w
To select oven functions.
To move up and down in the menu.
m
¸
To open the Options menu.
To close the Options menu (press and hold button).
¹
To confirm, change to the submenu.
º
To switch appliance on or off.
»
Switch RAPID HEAT UP on or off.
¼
To select between oven functions, clock functions and MEATPROBE.
-
To set values (e.g. temperature, time, weight or degree of cooking).
+
wm¸¹º»¼-+
Description of the Appliance8
Oven Features
Inside of door
You will find the shelf position number on the
inside of the oven door.
Oven steam vent
The steam from the oven is fed directly upwards
via the duct in the rear of the cooking surface.
Top heat and heating elements
Oven lighting
Meat probe socket
Fat Filter
Oven lighting
Fan heating element
Fan
Bottom Heat
Shelf positions
Oven shelf runners,
removable
9Before Using for the first time
Oven accessories
Oven shelf
For cookware, cake tins, roasts and grilled foods.
Baking tray
For cakes and biscuits.
Roasting Pan
For baking and roasting or as a pan for collect-
ing fat.
Meat probe
For determining exactly how far joints of meat
are cooked.
Before Using for the first time
Setting the language
1. When the appliance has been connect-
ed to the electrical supply, the
SPRACHE EINSTELLEN - LANGUAGE
MENU is shown in the display.
LANGUAGE MENU
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü2.0ü0
ý
88.8ú8
wm¸¹º»¼-+
Before Using for the first time10
2. Using the arrow buttons or se-
lect the desired language.
3. Confirm selected language with the OK
button.
From now on the texts in the display
appear in the language set.
Setting the clock
3 The time only has to be set if the appliance is disconnected from the power supply for a
long time.
1. TIME OF DAY lights up
In the clock display you see 12.00.
2. Use the or button to set the
current time.
3. Confirm using the SELECTION but-
ton.
The appliance is now ready to use.
3 If you would like to change one of these base settings at a later date, please refer to the
SETTINGS MENU section.
ENGLISH
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü2.0ü0
ý
88.8ú8
wPmP¸¹º»¼-+
TIME OF DAY
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ò
888ûcþ þüþ1ü2.0ü0
ý
88.8ú8
wm¸¹Pº»¼-+
TIME OF DAY
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ò
888ûcþ þüþ1ü2.2ü5
ý
88.8ú8
wm¸¹º»¼-P+P
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü2.2ü5
ý
88.8ú8
wm¸¹º»¼P-+
11Using the Rings
Initial cleaning
Clean the oven before using it for the first time.
1 Important: Do not use caustic or abrasive cleaning agents! These can damage the oven
surfaces.
3 For the metal surfaces, use commercially available cleaning agents.
1. Open the oven door.
The oven light is illuminated.
2. Remove all oven accessories, and clean them with warm water and washing up liquid.
3. Wash the oven in the same way, and wipe dry.
4. Wipe the front of the appliance with a damp cloth.
Using the Rings
3 Also refer to the operating instructions for your built-in hob. It contains important in-
formation on ovenware, operation, cleaning and care.
The following description does not apply to induction cooking zones.
Heat settings
You can set the heat settings from 1 -9.
You can set intermediate settings between 2 and 7.
In addition each of the ring switches is fitted with an automatic warm up function.
u =Keep warm setting
1 = lowest power
9 = highest power
A = Automatic warm up function
2 Switch the cooking zone off approx. 5-10 minutes before cooking is finished to make
use of the residual heat. This saves electricity.
3 The cooker has pop-up ring switches.
Press the ring switch to use it. The switch will then pop up.
Using the Rings12
Setting the heat setting
1. Switch on the appliance with the ON/OFF button.
2. When getting up to heat/searing food, select a
high heat setting.
3. To end the cooking process, turn back to the Off
position.
Cooking with the automatic warm up function
When cooking with the automatic warm up function, the cooking zone works with full
power for a certain amount of time and then switches back to the heat setting set to
continue cooking.
1. To switch on the automatic warm up period, turn the ring switch clockwise as far as it
will go.
Hob Cooking Zone Control Knobs
front left rear left rear right front right
Ring displays
13Using the Rings
2. Then turn the ring switch back to the desired heat setting for the continuing cooking
period.
3. To end the cooking process, turn back to the “O” position.
3 If you select a higher heat setting during the warming up time, e. g. turning from “3” up
to “6”, the time that has already elapsed for the warming up period is taken into consid-
eration. If you select a lower heat setting, the warm up period will end immediately.
3 You can end the automatic warm up function early by turning the ring switch back to
the Off position and then setting the required heat setting for the continuing cooking
period again.
Warming up times when cooking with the automatic warm up func-
tion
3 When cooking with the appliance for the first few times, take careful note of how it per-
forms. This will help you decide which heat settings are best for “your cookware” and
“your recipes and quantities”.
Automatic cut-out function for the rings
If one of the rings is not switched off after a certain period of time or the cooking set-
ting is not altered, the ring will automatically switch itself off.
The ring switch light is switched off.
The rings switch themselves off for:
Heat settings
.
1 -
.
2 after 6 hours
Heat settings
.
3 -
.
4 after 5 hours
Heat settings
.
4 -
.
5 after 4 hours
Heat settings
.
6 -
.
9 after 1.5 hours
Switch setting: Warming up time with the automatic warm up
function
A and 9 no automatic warm up function
A and8 4.5minutes
A and7 3.5minutes
A and 6
.
3minutes
A and6 2minutes
A and 5
.
12.5 minutes
A and 5 10 minutes
A and 4
.
8minutes
A and4 6.5minutes
A and 3
.
5.5 minutes
A and3 5minutes
A and 2
.
3minutes
A and2 2minutes
A and1 1minutes
A andu 0.5minutes
Using the Oven14
Starting up after an automatic cut-out
To start up again after an automatic cut-out, turn the ring switch that is turned on to
the Off position.
After that the ring is ready to use again.
Using the Oven
Menu operation in overview
3 The display only shows the menu options, that are possible to set with the function set.
TRUE FAN
FAN BAKING
SLOW COOK ONE
CONVENTIONAL
ROTITHERM
DUAL GRILL
SINGLE GRILL
KEEP WARM
DEFROST
BASE HEAT
POULTRY
PORK
BEEF
VEAL
GAME
RECIPE MENU
MEMORY MENU
CLEANING MENU
SETTINGS MENU
HEAT+HOLD MENU
EXTRA TIME MENU
RAPID HEAT UP MENU
RESIDUAL HEAT MENU
SOUND MENU
LANGUAGE MENU
FACTORY SETTINGS
Oven functions
menu
¸
w
m
w
m
w
m
¹
Options
menu
15Using the Oven
The Oven Functions menu
When you switch the appliance on, you find yourself in the Oven Functions menu.
Select the desired oven function using the arrow buttons or . In the menu sta-
tus bar, the current position within the menu is shown.
Setting an example oven function
1. Switch on the appliance using the ON/
OFF button.
2. Using the arrow buttons or se-
lect the oven function.
A suggested temperature appears in
the temperature display.
The oven starts to heat up.
3. With the or button, the tem-
perature can be raised or lowered.
3 When the temperature set is reached,
an audible signal sounds.
The Options menu
Using the OPTION button, enter the Options menu.
Select the desired option using the arrow buttons or . In the menu status bar,
the current position within the menu is shown.
Use the OK button to change to the menu of the selected option.
The sub-menus
Select the desired setting using the arrow buttons or or change to other sub-
menus using the OK button.
3 At the end of every menu there is the menu option BACK.
You use this to go back to the higher menu.
You can cancel a setting procedure by pressing and holding down the OPTION but-
ton.
You will then find yourself back in the Oven functions menu.
–—OVEN FUNCTIONS
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
280ûcþ þüþ1ü2.2ü5
ý
88.8ú9
wm¸¹ºP»¼-+
____________________
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
200ûcþÝÜÜÜþ1ü2.2ü5
ý
00.0ü0
wPm¸¹º»¼-+
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
180ûcþÝÜÜÜþ1ü2.2ü6
ý
00.0ü1
wm¸¹º»¼-P+P
Using the Oven16
Use of the oven functions
The oven has the following functions:
Meat programmes
or
Oven function Application
TRUE FAN To bake on three oven levels maximum at the same time.
Decrease the oven temperatures 20-40 °C compared with Con-
ventional.
FAN BAKING For baking on one level dishes that require more intensive
browning and a crispy base.
Set the oven temperatures 20-40 °C lower than when using
Conventional.
SLOW COOK For preparing especially tender succulent roasts.
CONVENTIONAL For baking and roasting on one oven level.
ROTITHERM For roasting larger joints of meat or poultry on one level.
The function is also suitable for gratinating and browning
DUAL GRILL For grilling flat food items in large quantities and for toasting.
SINGLE GRILL For grilling flat food items placed in the middle of the grill and
for toasting.
KEEP WARM To keep dishes warm.
DEFROST For defrosting e. g. flans and gateaux, butter, bread, fruit or
other frozen foods.
BASE HEAT For baking cakes with crispy or crusty bases.
Meat programmes
with weight input
Application Weight range
POULTRY Chicken, duck, goose 0.9 to 4.7 kg
PORK Roast pork, shoulder of pork 1.0 to 3.0 kg
BEEF Roast beef, pot roast 1.0 to 3.0 kg
VEAL Roast veal 1.0 to 3.0 kg
GAME Venison, rabbit 1.0 to 3.0 kg
17Using the Oven
Usage, Tables, Tips and Recipes
You will find practical information on the various oven functions, programmes and au-
tomatic recipes in the accompanying booklet.
Switching the Oven On and Off
Selecting an oven function
1. Switch on the appliance using the ON/OFF button.
2. Using the arrow buttons or se-
lect the desired oven function.
A suggested temperature appears in
the temperature display.
The oven starts to heat up.
Changing the oven
temperature
Press the or button to raise or
lower the temperature.
3 When the selected temperature is
reached, a signal sounds.
Meat programmes with
meat probe plugged in
Degree of cooking Notes
TOP SIDE BEEF TOP SIDE BEEF RARE
-TOP SIDE BEEF MED.
TOP SIDE BEEF WELL
BEEF SCAN BEEF SCAN RARE Roast beef Scandinavi-
an style (no browning)
BEEF SCAN MED.
BEEF SCAN WELL
PORK JOINT - -
VEAL - -
LAMB JOINT - -
GAME - -
BONED POULTRY - -
____________________
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
200ûcþÝÜÜÜþ1ü2.2ü5
ý
00.0ü0
wPm¸¹º»¼-+
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
180ûcþÝÜÜÜþ1ü2.2ü6
ý
00.0ü1
wm¸¹º»¼-P+P
Using the Oven18
Switching off an oven function
Press the arrow buttons or re-
peatedly until OVEN FUNCTIONS ap-
pears in the display again.
Turning the appliance off com-
pletely
Switch appliance off by pressing
the ON/OFF button.
3 Cooling fan
The fan switches on automatically in order to keep the appliance’s surfaces cool. When
the oven is switched off, the fan continues to run to cool the appliance down, then
switches itself off automatically.
Pre-heating with the RAPID HEAT UP function
After an oven function has been selected, with the additional function RAPID HEAT UP
the pre-heating time can be shortened.
Pre-heating the empty oven is unnecessary for most baking and roasting sessions, be-
cause the temperature set is generally reached in a short time (see Tables and Tips).
We recommend pre-heating the empty oven using the RAPID HEAT UP function for bis-
cuits that quickly spread into one another, bread rolls and Swiss rolls.
1 Important: Do not put the food to be cooked into the oven, until RAPID HEAT UP is
completed and the oven is operating using the desired function.
1. Set the oven function (e.g. CONVENTIONAL). Change the suggested temperature, if nec-
essary.
2. Press the RAPID HEAT UP button. The symbol lights up:
When the bars flash one after another it shows that RAPID HEAT UP is operating.
When the temperature set is reached, the bars of the heat indicator are lit. An audible
signal sounds. The symbol goes out.
The oven now continues heating according to the pre-set oven function and tempera-
ture. You can now place the food in the oven.
3 If you generally prefer to put food into a pre-heated oven, you can switch on the RAPID
HEAT UP function permanently (see SETTINGS MENU).
The RAPID HEAT UP function is then switched off with the RAPID HEAT UP button.
–—OVEN FUNCTIONS
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
280ûcþ þüþ1ü2.2ü5
ý
88.8ú9
wPmP¸¹º»¼-+
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
280ûcþ þüþ1ü2.2ü5
ý
88.8ú9
wm¸¹ºP»¼-+
19Using the Oven
3 The RAPID HEAT UP function can be switched on with the oven functions TRUE FAN,
FAN BAKING, CONVENTIONAL and ROTITHERM.
Heat indicator
Heating Up indicator
When the oven function has been
switched on, the bars that slowly light
up one after the other indicate how far
the oven has heated up.
Rapid Heat Up indicator
When the RAPID HEAT UP function has
been switched on, the bars that flash
one after the other indicate that RAPID
HEAT UP is operating.
Residual heat indicator
After switching off the oven, the re-
sidual heat in the oven is displayed.
Checking the temperature to the
degree
Press the and buttons at the
same time.
The current oven temperature is dis-
played.
3 The temperature check does not work
with oven functions with suggested
temperatures that cannot be adjusted,
such as e. g., SLOW COOK.
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
180ûcþþÝÞÜÜþ1ü2.12
ý
00.ü07
wm¸¹º»¼-+
CONVENTIONAL
ý ý ý é ýþ ýþ ý
ý ý
ý
ý
ý ý
180ûcþÝÜÜÜþ1ü2.1ü0
ý
00.0ü5
wm¸¹º»P¼-+
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
160ûcþÝÞßÜþ1ü3.2ü5
ý
88.8ú9
wm¸¹º»¼-+
CONVENTIONAL
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
295ûcþ þüþ1ü3.2ü5
ý
00.0ú2
wm¸¹º»¼-P+P
Using the Oven20
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking
or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
Set temperature is above 80°C
Fixed duration
Switching on Heat+Hold
1. Select oven function, meat programme or automatic programme.
2. If necessary, set duration or core temperature.
3. Press the SELECTION button repeatedly until HEAT+HOLD flashes.
4. Confirm with .
The Heat+Hold function is now switched on.
5. As soon as the function is completed, a signal sounds and Heat+Hold starts.
The function set runs at 80°C for 30 minutes.
After 30 minutes with Heat+Hold are over, the oven switches itself off.
3 Irrespective of the function set, Heat+Hold remains active. You can change between the
oven functions.
3 Heat+Hold can be activated or deactivated in the SETTINGS MENU menu.
Inserting the Combination Shelf, Baking Tray and Roasting Pan
3 Shelf runner safety and anti-tip device
As a shelf runner safety device, all insertable components have a small curved indenta-
tion at the bottom on the right and left-hand edge.
Always insert insertable components so that this indentation is at the back of the oven
interior. This indentation is also important for preventing the insertable components
from tipping.
Inserting the baking tray or roasting pan
Push the baking tray or roasting pan between
the guide bars of the selected oven level.
/