Topcon AIT-16 User manual

Topcon
Brand
Topcon
Model
AIT-16
Type
User manual
INSTRUCTION MANUAL
ADJUSTABLE INSTRUMENT TABLE
AIT-16
1
INTRODUCTION
Thank you for purchasing the TOPCON AIT-16 Adjustable Instrument Table.
Purpose of use
• This table enhances the operability of the equipment which is loaded on it.
This adjustable instrument table has the following features:
• The equipment loaded on this table can be moved up and down smoothly according to
the height of the patient's eyes.
• Ample leg room is provided, so the patient can sit in a comfortable position during the
examination.
This Instruction Manual describes the TOPCON AIT-16 Adjustable Instrument Table,
including the outline, operation, trouble shooting, inspection, maintenance and cleaning.
To get the best usage from this table, carefully read "DISPLAY FOR SAFE USE" and
"SAFETY PRECAUTIONS". Keep this manual at hand for future reference.
Storage method
1. Environmental conditions Temperature: 10 ~ 40°C
Humidity: 35 ~ 85%
Air pressure: 700 ~1060 hPa
2. When storing the table, adhere to the following conditions:
(1) Do not splash this table with water or store it in a place that is close to a water
supply.
(2) Store this table in a place where it is not adversely affected by air pressure,
temperature, humidity, ventilation, sunlight, dust, salty/sulfurous air, etc.
(3) Keep this table stable without inclination, vibration, shock, etc. (not only during
storage but also in transportation).
(4) Do not store this table where chemicals are stored or gas is generated.
Safety precautions
• Before using this table, connect all the power cords correctly.
• Use the power supply 120Vac ± 10% (50/60Hz ± 1Hz).
• Shape of plug USA 120V/60Hz Type A (Hospital Grade)
Canada 120V/60Hz Type A (Hospital Grade)
• When this table is not used over a long period of time, remove the plug from the outlet.
2
DISPLAY FOR SAFE USE
In order to encourage the safe use of products and prevent any danger to the operator or others or
damage to property, important warnings are put on the products and inserted into the instruction manuals.
We suggest that everyone understand the meaning of the following displays and icons before reading the
"SAFETY PRECAUTIONS" and text.
DISPLAY
ICON
Display Meaning
WARNING
Improper handling or ignoring this display may lead to the
serious injury or death.
CAUTION
Improper handling or ignoring this display may cause personal
injury or physical damage.
• Injury refers to cuts, bruises, burns, electric shock, etc.
• Physical damage refers to extensive damage to a building(s), peripheral equipment and/or
furniture.
Icon Meaning
This icon indicates Prohibition.
Specific contents are shown with words or an illustration located next
to the icon.
This icon indicates Mandatory Action.
Specific contents are shown with words or an illustration located next
to the icon.
This icon indicates Hazard Alert (Warning).
Specific contents are shown with words or an illustration located next
to the icon.
The appliance is employing a "hospital grade" attachment plugs.
Grounding reliability can only achieved when the equipment is
connected to an equivalent receptacle marked "hospital Grade" or
"hospital Only".
3
SAFETY PRECAUTIONS
WARNING
Icons Prevention Item Page
Do not disassemble, modify or repair this adjustable instrument table. You
may receive an electric shock. Ask your dealer to repair it.
11
Do not splash this adjustable instrument table with water or any other liquid.
A fire or electric shock may occur as a result.
-----
Connect the power plug to the 3-core AC outlet (with grounding). If the table is
not grounded and an electric leak occurrs, a fire or electric shock may result.
10
Turn off the power switch (main switch) and remove the power cord from the
outlet before replacing the fuses. If you do not follow this procedure, you may
receive an electric shock. Replace the fuses with the specified rated ones.
17
If smoke comes from this adjustable instrument table, immediately turn off the
power switch (main switch) and remove the power plug from the outlet. If you
keep operating the table without solving this problem, a fire may occur. Ask
your dealer to repair it.
10
CAUTION
Icons Prevention Item Page
Don't incline the device by more than 10° when it is on the adjustable
instrument table. The table may tip over.
5
Don't put your fingers between the movable units when the main unit is in use.
Your fingers may become caught, causing an injury.
10
Make sure the table fixation bolts are tightened securely. When a bolt
becomes loose, the tabletop may come off, causing the loaded equipment to
fall off and cause an injury.
5
Make sure the leg fixation bolts are tightened securely. When a bolt becomes
loose, the leg unit may come off, causing the main unit to tip over and cause
an injury.
5
To prevent electric shock, do not remove the cover. Ask the service personnel
to repair your adjustable instrument table.
11
18
Use the accessory fuse. If other fuses are used, the adjustable instrument
table may malfunction and cause a fire.
17
4
MAINTENANCE
USER MAINTENANCE
To maintain the safety and performance of the equipment, never attempt to do the maintenance on
your own. Ask our service personnel to repair the adjustable instrument table except for the items
specified here. These are the exceptions and can be performed by the user. For details, follow the
instructions outlined below.
Replacement of fuse
The fuse of the main unit can be replaced with a new one. For details, refer to "Replacement of fuse"
on P. 17.
ESCAPE CLAUSE
Don't place the adjustable instrument table on a slope or in an unstable place.
The table and the loaded devices may tip over or fall off and cause an injury.
-----
This instrument has been tested (with 120V/230V) and found to comply with
IEC60601-1-2: 1993.
This instrument radiates radio frequency energy within standard and may
affect other devices in vicinity.
If you have found out by turning on/off the instrument that it affects other
devices, it is recommended to change the direction, keep a proper distance
against other devices or change the outlet.
If you have a question, consult with the selling agent.
-----
• TOPCON shall take no responsibility for damage due to fire, earthquakes, actions by third persons
or other accidents, or the negligence and misuse of the user and use under unusual conditions.
• TOPCON shall take no responsibility for damage derived from the use or inability to use this
equipment, such as a loss of business profit and/or suspension of business.
• TOPCON shall take no responsibility for damage caused by usage other than that described in this
Instruction Manual.
• TOPCON shall take no responsibility for the result of diagnosis using this equipment. A doctor must
take full responsibility for the medical treatment.
Icons Prevention Item Page
5
WARNING INDICATIONS AND POSITIONS
For safety purposes, this equipment includes clearly labeled warnings.
Correctly use the equipment following these warning instructions. If any of the following marking labels
are missing, please contact your dealer or your local TOPCON office listed on the back cover.
CAUTION
Make sure the table fixation
bolts are tightened securely.
When a bolt becomes loose,
the tabletop
may come off, causing the
loaded equipment to fall off
and cause an injury.
CAUTION
Don't incline the device by
more than 10° when it is on
the adjustable instrument
table. The table may tip over.
CAUTION
Make sure the leg fixation bolts
are tightened securely. When a
bolt becomes loose, the leg
unit
may come off, causing the
main unit to tip over and cause
an injury.
6
CONTENTS
INTRODUCTION .......................................................................................................................................1
DISPLAY FOR SAFE USE .....................................................................................................................2
SAFETY PRECAUTIONS .......................................................................................................................3
MAINTENANCE ........................................................................................................................................4
USER MAINTENANCE .......................................................................................................................4
ESCAPE CLAUSE ...................................................................................................................................4
WARNING INDICATIONS AND POSITIONS .....................................................................................5
NOMENCLATURE AND FUNCTIONS
NOMENCLATURE AND FUNCTIONS ................................................................................................7
STANDARD ACCESSORIES ..............................................................................................................8
HOW TO USE
ASSEMBLY PROCEDURE .................................................................................................................9
INSTALLATION OF DEVICE ............................................................................................................10
OPERATION .....................................................................................................................................10
TROUBLE SHOOTING
TROUBLE SHOOTING GUIDE .........................................................................................................11
REFERENCE MATERIALS
OPTIONAL ACCESSORIES .............................................................................................................12
SPECIFICATIONS AND PERFORMANCE .......................................................................................12
CLASSIFICATION .............................................................................................................................12
ELECTROMAGNETIC COMPATIBILITY ..........................................................................................13
MAINTENANCE AND INSPECTION
INSPECTION ....................................................................................................................................17
MAINTENANCE ................................................................................................................................17
CLEANING ........................................................................................................................................18
PERIOD OF USE AND DISPOSITION .............................................................................................18
7
NOMENCLATURE AND FUNCTIONS
NOMENCLATURE AND FUNCTIONS
NOMENCLATURE AND FUNCTIONS
Up-and-down switch:
Used to move the table up and down.
Support:
The table is mounted on its top.
Base:
The leg unit is attached to it by means of the center column.
Spare receptacle:
Used to supply power for a loaded device.
Main switch:
This is the power switch of the main unit.
Caster:
Used to move this table. Locking/unlocking can be changed.
Table fixation bolt
Support
Main switch
Caster
Leg fixation bolt
Base
Up-and-down switch
Fuse
Spare receptacle
8
NOMENCLATURE AND FUNCTIONS
STANDARD ACCESSORIES
The standard accessories are shown below. Check to see if all of them are included. The numerals in
parentheses show the quantity.
If any of the standard accessories are missing, contact your local TOPCON office.
Instruction manual (1) Makeup button (2)
Fuse (2) 5A-125V
(2) 10A-125V
Hexagonal socket bolt M6 × 20 With SW (4)
Hexagonal socket bolt M8 × 30 With SW (2)
Hexagonal wrench for M8 (1)
Hexagonal wrench for M6 (1)
INSTRUCTION MANUAL
ADJUSTABLE INSTRUMENT TABLE
AIT-16
9
HOW TO USE
HOW TO USE
ASSEMBLY PROCEDURE
1 Attach the legs to the base.
The casters must be positioned diagonally against both the patient and the operator. To
attach the legs, use the two accessory M8 hexagonal socket bolts (with spring washers).
Securely tighten and affix the bolts.
2 Push the makeup button into the M8 hole of the leg (follow the same procedure for both the right
and the left leg).
3 Set the tabletop in place.
Set the tabletop in place so that the φ50mm hole (for arranging the cord) is at the opposite
side of the up-and-down switch.
To attach the tabletop, use the four accessory M6 hexagonal socket bolts (with spring
washers). Securely tighten and affix the bolts.
* Do not use any other tabletop except for the one included with the AIT-16 Instrument
Table.
4 Set the adjustable instrument table in the specified position.
There is a hole to pass the power cord through at the center of the table. When loading a
device onto the table, pass the cord through this hole beforehand.
Spring washer
M8 hexagonal socket bolt
Makeup button
10
HOW TO USE
INSTALLATION OF DEVICE
Make sure that the loaded device is set at the specified position.
Refer to each setup manual for details on connecting the cable wiring.
OPERATION
To operate this adjustable instrument table smoothly, follow the procedure outlined below.
1 Turn the main switch off.
2 Insert the power cord into the specified outlet.
3 Turn the main switch on.
4 Let the patient sit down at the center of the loaded instrument table.
5 Set the table to the proper height with the up-and-down switch according to the patient's posture.
The table moves up and down by pressing the up-and-down switch.
WARNING
If smoke comes from this adjustable instrument table, immediately turn
off the power switch (main switch) and remove the
power plug from the outlet. If you keep operating the table without solv-
ing this problem, a fire may occur. Ask your dealer to repair it.
WARNING
Connect the power plug to the 3-core AC outlet (with grounding). If the
table is not grounded and an electric leak occurrs, a fire or electric shock
may result.
CAUTION
Don't put your fingers between the movable units when the main unit is
in use. Your fingers may become caught, causing an injury
POWER
Main switch
Up-and-down switch
11
TROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTING GUIDE
Trouble shooting guide
If the instrument table is not functioning properly, check the conditions in the check list below.
If the problem is not resolved by following the instructions or if there is no relevant item in the "Symp-
tom" column of the check list, contact your local TOPCON office listed on the back cover of this man-
ual.
Check list
WARNING
Do not disassemble, modify or repair this adjustable instrument table.
You may receive an electric shock. Ask your dealer to repair it.
CAUTION
To prevent electric shock, do not remove the cover. Ask the service per-
sonnel to repair your adjustable instrument table.
Symptom Condition Remedial measure Page
The table does not
move up and down.
The power cord has come out of
the outlet.
Insert the power plug securely. 10
The main switch is not turned on. Turn the main switch on. 10
The fuse has blown out. Refer to "Replacement of fuse". 17
12
REFERENCE MATERIALS
REFERENCE MATERIALS
OPTIONAL ACCESSORIES
Table (AIT-16) : This is a standard table with dimensions of "500 (W) × 490 (D)".
Special table (AIT-11) : This is a large table with dimensions of "800 (W) × 500 (D)".
In general, it is used to load two devices onto the tabletop.
SPECIFICATIONS AND PERFORMANCE
1. Performance
Dimensions of main unit Type A : 525 (W) × 490 (D) × 660 ~ 880 (H) mm
Weight : 23kg (Weight of main unit)
Allowable load weight : 50kg
Power supply voltage and frequency: 120Vac, 50/60Hz
Power supply input : 220VA
Short-time operation : 2min
Subject to change in performance and/or appearance without advance notice for future product
improvement.
CLASSIFICATION
• The type of protection against electric shock: Class I equipment
• The mode of operation: continuous operation
• Not AP or APG equipment
13
REFERENCE MATERIALS
ELECTROMAGNETIC COMPATIBILITY
This product conforms to the EMC Standard (IEC 60601-1-2:2001).
a) MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in the ACCOMPANYING
DOCUMENTS.
b) Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL EQUIPMENT.
c) The use of ACCESSORIES, transducers and cables other than those specified, with the exception of
transducers and cables sold by the manufacturer of the EQUIPMENT or SYSTEM as replacement
parts for internal components, may result in increased EMISSIONS or decreased IMMUNITY of the
EQUIPMENT or SYSTEM.
d) The EQUIPMENT or SYSTEM should not be used adjacent to or stacked with other equipment. IF
adjacent or stacked use is necessary, the EQUIPMENT or SYSTEM should be observed to verify nor-
mal operation in the configuration in which it will be used.
Guidance and manufacturer's declaration - electromagnetic emissions
The AIT-16 is intended for use in the electromagnetic environment specified below.
The customer or the user of the AIT-16 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The AIT-16 uses RF energy only for its internal func-
tion. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby elec-
tronic equipment.
RF emissions
CISPR 11
Class B
The AIT-16 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply net-
work that supplies buildings used for domestic pur-
poses.
14
REFERENCE MATERIALS
Guidance and manufacturer's declaration - electromagnetic immunity
The AIT-16 is intended for use in the electromagnetic environment specified below.
The customer or the user of the AIT-16 should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance
level
Electromagnetic environment -
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood, concrete or
ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30%.
Electrical fast
transient/burst
IEC 61000-4-4
± 2 kV for power
supply lines
± 1 kV for
input/output lines
± 2 kV for power
supply lines
± 1 kV for
input/output lines
Mains power quality should be that
of a typical commercial or hospital
environment.
Surge
IEC 61000-4-5
± 1 kV
differential mode
± 2 kV
common mode
± 1 kV
differential mode
± 2 kV
common mode
Mains power quality should be that
of a typical commercial or hospital
environment.
Voltage dips, short
interruptions and
Voltage variations
on power supply
input lines
IEC 61000-4-11
<5% U
t
(>95% dip in U
t
)
for 0.5 cycle
40% U
t
(60% dip in U
t
)
for 5 cycles
70% U
t
(30% dip in U
t
)
for 25 cycles
<5% U
t
(>95% dip in U
t
)
for 5 sec
<5% U
t
(>95% dip in U
t
)
for 0.5 cycle
40% U
t
(60% dip in U
t
)
for 5 cycles
70% U
t
(30% dip in U
t
)
for 25 cycles
<5% U
t
(>95% dip in U
t
)
for 5 sec
Mains power quality should be that
of a typical commercial or hospital
environment. If the user or the AIT-
16 requires continued operation
during power mains interruptions, it
is recommended that the AIT-16 be
powered from an uninterruptible
power supply or battery.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m
Power frequency magnetic fields
should be at levels characteristic of
a typical location in a typical com-
mercial or hospital environment.
NOTE U
t
is the a.c. mains voltage prior to application of the test level.
15
REFERENCE MATERIALS
Guidance and manufacturer's declaration - electromagnetic immunity
The AIT-16 is intended for use in the electromagnetic environment specified below.
The customer or the user of the AIT-16 should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance
level
Electromagnetic environment -
guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150kHz to 80MHz
3 V/m
80MHz to 2.5GHz
3 V
3 V/m
Portable and mobile RF communica-
tions equipment should be used no
closer to any part of the AIT-16,
including cables, than the recom-
mended separation distance calcu-
lated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance
d = 1.2
d = 1.2 80MHz to 800MHz
d = 2.3 800MHz to 2.5GHz
where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufac-
turer and d is the recommended sepa-
ration distance in meters (m).
Field strengths from fixed RF transmit-
ters, as determined by an electromag-
netic site survey,
a
should be less than
the compliance level in each fre-
quency range.
b
Interference may occur in the vicinity
of equipment marked with the follow-
ing symbol:
NOTE 1
NOTE 2
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
a
b
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones
and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be pre-
dicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF trans-
mitters, an electromagnetic site survey should be considered. If the measured field strength in the
location in which the AIT-16 is used exceeds the applicable RF compliance level above, the AIT-16
should be observed to verify normal operation. If abnormal performance is observed, additional mea-
sures may be necessary, such as reorienting or relocating the AIT-16.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
P
P
P
16
REFERENCE MATERIALS
Recommended separation distance between
portable and mobile RF communications equipment and the AIT-16
The AIT-16 is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the AIT-16 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (trans-
mitters) and the AIT-16 as recommended below, according to the maximum output power of the com-
munications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150kHz to 80MHz
d = 1.2
80MHz to 800MHz
d = 1.2
800MHz to 2,5GHz
d = 2.3
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
11.21.22.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation dis-
tance d in metres (m) can be estimated using the equation applicable to the frequency of the transmit-
ter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1
NOTE 2
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
P
P
P
17
MAINTENANCE AND INSPECTION
MAINTENANCE AND INSPECTION
INSPECTION
1. Inspect the adjustable instrument table and the parts periodically.
2. When using the adjustable instrument table after it has been in storage for an extended period of
time, make sure that it operates normally and safely before using it with a patient.
3. When the adjustable instrument table is not in use, apply the dust cover.
MAINTENANCE
Daily maintenance
1. When the adjustable instrument table is not in use, turn off the power.
2. Do not store the adjustable instrument table in a dusty place.
Replacement of fuse
Make sure that the power is OFF and the power cord is removed from the outlet.
1 Turn the fuse holder to the left with a Phillips screwdriver and remove the cover.
2 Replace the fuse with the accessory one.
WARNING
Turn the power switch (main switch) off and remove the power cord from
the outlet before replacing the fuses. If you do not follow this procedure,
you may receive an electric shock. Replace the fuses with the specified
rated ones.
CAUTION
Use the accessory fuse. If other fuses are used, the adjustable instru-
ment table may malfunction and cause a fire.
Fuse
Fuse holder
18
MAINTENANCE AND INSPECTION
Consumable part table
CLEANING
Cleaning of the external cover
1 When the external cover or the operation panel are dirty, wipe them with a dry cloth.
2 When the external cover is extremely dirty, dissolve a tableware neutral cleanser in tepid water
and dampen a cloth with the water/cleanser solution. Wring the cloth tightly and wipe the exter-
nal cover with it.
PERIOD OF USE AND DISPOSITION
Period of use
8 years only when regular maintenance and inspection are done (according to self-certification [Topcon
data]).
Disposition
Dispose of the adjustable instrument table according to your local government's laws regarding dispo-
sition and recycling.
Part name Type
Consumable part
Fuse 5A-125V Bel Fuse Inc.
Fuse 10A-125V Bel Fuse Inc.
GSA 125V-5A-N
GSA 125V-10A-N
CAUTION
To prevent electric shock, do not remove the cover. Ask the service per-
sonnel to repair your adjustable instrument table.
NOTE
• Do not wipe the plastic section of the adjustable instrument table with volatile
solvents, etc. If you wipe it with benzine, thinner, ether, gasoline, etc., discolor-
ation or deterioration may occur.
• Wipe the adjustable instrument table with a cloth dampened with tepid water or
tableware cleanser.
• Do not blow spray cleaner directly into this adjustable instrument table. The
spray cleaner may travel through a clearance around the switches and cause
electrical problems.
ADJUSTABLE INSTRUMENT TABLE
AIT-16
4070199110
Printed in Japan 0506-100TH
75-1 Hasunuma-cho,Itabashi-ku,Tokyo,174-8580 Japan.
Phone:3-3558-2520 Fax:3-3960-4214 www.topcon.co.jp
3
7 West Century Road,Paramus,New Jersey 07652,U.S.A. Phone:201-261-9450 Fax:201-387-2710 www.topcon.com
T
OPCON MEDICAL SYSTEMS, INC.
(
European Representative)
E
ssebaan 11, 2908 LJ Capelle a/d IJssel,THE NETHERLANDS Phone:010-4585077 Fax:010-4585045 www.topconeurope.com
T
OPCON EUROPE B.V.
Giesserallee 31-33 D-47877 Willich GERMANY Phone:02154-8850 Fax:02154-885111 www.topcon.de E-mail:[email protected]
TOPCON DEUTSCHLAND G.m.b.H.
110 Provencher Avenue, Boisbriand, QC J7G 1N1 CANADA Phone:450-430-7771 Fax:450-430-6457 www.topcon.ca
TOPCON CANADA INC.
HEAD OFFICE:Frederic Mompou 5, ED. Euro 3, 08960,Sant Just Desvern Barcelona,SPAIN Phone:93-4734057 Fax:93-4733932 www.topconesp.com
MADRID OFFICE:Avenida Burgos, 16E,1˚ 28036,Madrid,SPAIN Phone:91-302-4129 Fax:91-383-3890
TOPCON ESPAÑA S.A.
Neongatan 2 S-43151 Mölndal, SWEDEN Phone:031-7109200 Fax:031-7109249 E-mail:[email protected]
TOPCON SCANDINAVIA A.B.
Topcon House,Kennet Side,Bone Lane,Newbury,Berkshire RG14 5PX United Kingdom Phone:01635-551120 Fax:01635-551170
TOPCON (GREAT BRITAIN) LTD.
B
lk 192 Pandan Loop, #07-01 Pantech Industrial Complex, SINGAPORE 128381 Phone:62780222 Fax:62733540 www.topcon.com.sg
T
OPCON SOUTH ASIA PTE.LTD.
Excella Business Park Block C,1st Floor,Jalan Ampang Putra,Taman Ampang Hillir, 55100 Kuala Lumpur,MALAYSIA Phone:03-42701192 Fax:03-42704508
TOPCON INSTRUMENTS (MALAYSIA) SDN.BHD.
77/162 Sinn Sathorn Tower, 37th Fl.,Krungdhonburi Rd.,Klongtonsai, Klongsarn, Bangkok 10600,THAILAND Phone:440-1152~7 Fax:440-1158
TOPCON INSTRUMENTS (THAILAND) CO.,LTD.
U
nit 18,4 Avenue of Americas Newington NSW 2127 AUSTRALIA Phone:02-8748-8777 Fax:02-9647-2926 www.topcon.com.au
T
OPCON AUSTRALIA PTY.LTD.
2
F Yooseoung Bldg., 1595-3, Seocho-Dong, Seocho-Gu, Seoul, 137-876 KOREA Phone:02-2055-0321 Fax:02-2055-0319 www.topcon.co.kr
T
OPCON KOREA CORPORATION
2
/F.,Meeco Industrial Bldg.,No.53-55 Au Pui Wan Street,Fo Tan Road,Shatin,N.T.,Hong Kong Phone:2690-1328 Fax:2690-2221 E-mail:[email protected]
T
OPCON OPTICAL (H.K.) LTD.
1
070 Poly Plaza Building,14 Dongzhimen Nandajie Dongcheng District,Beijing,100027,CHINA Phone:10-6501-4191 Fax:10-6501-4190
T
OPCON CORPORATION BEIJING OFFICE
P
.O.Box 70-1002 Antelias,BEIRUT-LEBANON Phone:961-4-523525/523526 Fax:961-4-521119
T
OPCON CORPORATION BEIRUT OFFICE
C
/O Atlas Medical FZCO., P.O.Box 54304 C-25, Dubai Airport Free Zone, UAE Phone:971-4-2995900 Fax:971-4-2995901
T
OPCON CORPORATION DUBAI OFFICE
89, rue de Paris 92585 Clichy, Cedex,FRANCE Phone:01-4106-9494 Fax:01-4739-0251
ITALY OFFICE:Via Monfalcone 39, 20092 Cinisello B. mo (MI) ITALY Phone:02-61-25-583 Fax:02-61-25-927
TOPCON S.A.R.L.
0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Topcon AIT-16 User manual

Topcon
Brand
Topcon
Model
AIT-16
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents