Model PTC156LC：
16:10 DIGITAL LCD-TV-Monitor
OPERATING MANUAL
15.6 Hi-Definition LCD Flat Panel TV
10
5
FRONT AND BACK
CONNECTIONS
OF LCD TV
3
REMOTE CONTROL
5
4
3
3
12
TV
AINSTALL TION
DRAWINGS
2
1
PREFACE
SAFETY
PRECAUTIONS
Remote control instructions in TV mode
Remote control setup
Turning on and off TV
Select on screen language
Choosing a TV channel
Selecting input source
How to adjust the OSD screen
Volume adjustment
13
13
13
14
14
14
15
15
16
18
20
21
MENU
OPERATION
BASIC
OPERATION
TV OPERATION
6
21
7
8
8
7
6
6
9
Power Cord Connection
AV Connection
PC Connection
S-Video Connection
YPbPr Connection
Antennas Connection
HDMI Connection
Picture menu options
Audio menu options
Setup menu options
Feature menu options
VGA menu options
Component options
HDMI and S-VIDEO menu options
Contents
1
COMPONENT VIDEO GAME DVD CABLE BOX(// )
9
23
TROUBLESHOOTING
AND ADVICE
7
24
SPECIFICATIONS
8
2
3
1. PREFACE
Thank you for buying this TV ! Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install
Your dealer. Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Minimum distances
10cm
20cm
10cm 5cm
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
4
Keep the TV dry and away from humidity.
Keep the TV away from heat sources
.
Unplug the before cleaning it. Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by
the manufacturer. Using inadequate spare parts can
shocks, short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
5
3. Front , Back , Connections of LCD
Front View
Back View and Control Connections
SOURCE
MENU
CH-
CH+
VOL-
VOL+
POWER
12
3
4
5
67
5oAUDIO: Connect the Audio output jack f.PC
PC.
2. PHONE: Connect the headphone.
1. DC IN: DC input socket.
L/R(AUDIO) : Connect the Audio out put ack
j
of DVD ,VCR or PC for Video/S-VIDEO/YPbPr.
3. Video
V( ) Connect the Video output jack of:
.DVDorVCR
4. YPbPr: Connect the YPbPr output jack of
DVD or VCR.
6. VGA: Connect the PC-RGB output jack of PC.
7. HDMI: Connect the HDMI output jack of DVD.
8. S-VIDEO: Connect the S-VIDEO output jack
ofDVDorVCR.
9
. RF: Connect the antenna.
VGA
HDMI
S-VIDEO
RF
YPr
Pb
L
R
DC
12V
PHONE
PC
AUDIO
V
3
12
4
5
678 9
1. Press POWER button to turn standby mode“”
on or off.
4. Press MENU to bring up the main menu on“”
the screen.
5. Press to select the input source.“”SOURCE
2. Press VOL+ or VOL- to increase or“”“”
the sound level.decrease
6 POWER INDICATOR: show red in standby mode,.
show green when your TV is switched on.
7. REMOTE SENSOR: infrared sensor for the rem
control.
3. Press CH+ or CH- to scan through channels.“”“”
6
Power Cord Connection
4. TV INSTALLTION DRAWINGS
DC
12V
ConnectionAntennas
75 OHM
ANTENNA
PLUG
POWER PLUG OF
ANTENNA
AMPLIFIER
OUTDOOR
ANTENNA
AMPLIFIER
VHF ANTENNA UHF ANTENNA
INDOOR
ANTENNA
AMPLIFIER
RF
1. Connect the power cord correctly as shown.
2. Press the POWER switch of your LCD V to switch on the LCD TV. The power indicator on the
panel lights up in Green
T
front .
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
Shown above can be sourced from TV equipment shops, which will provide service for correct
installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack
shown above.
as
7
PC Connection
Stereo Audio Cable
AUDIORGB-PC OUTPUTRGB-PC OUTPUT
PC IN
S-Video Connection
DVDorVCR
DVD or VCR Back
AUDIO
S-VIDEO Cable
Audio Cable
TV Back
TV Back
Connect the S-VIDEO output of the DVD or VCR to the S-VIDEO input on the set. The picture quality
is improved compared to connecting a regular VCR to the video input.
Connect the Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
Select S-VIDEO input source with using the SOURCE button .
Connect the RGB output of the PC to the VGA in jack on the TV set. Connect the PC AUDIO
output of the PC to the PC AUDIO in jack on the TV set.Select VGA input source using
SOURCE button.
with
8
YPbPr Connection
Pr Pb Y
LR
RCA Video Cable
RCA Audio Cable
DVDorVCR
DVD or VCR Back
TV Back
AV Connection
1
Video CableVideo Cable
VL RV LR
DVD or VCRDVD or VCR
DVDorVCRBackDVD or VCR Back
TV Back
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is
improved; compared to connecting a regular VCR to the video input. Connect the Audio output of
the DVD or VCR to the Audio input jacks on the set using the RCA cable.
Match the jacks colors Y is green Pb is blue Pr is red Audio left is white and Audio right in red
Select YPbPr input source with using the SOURCE button.
:,,, .
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the jacks on the set usingVIDEO
the RCA cable. Select input source with using the SOURCE buttonComposite
.
VGA
HDMI
S-VIDEO
RF
YPr
Pb
L
R
DC
12V
PHONE
PC
AUDIO
V
HDMI Connection
DVD or VCR
DVDorVCR Back
TV Back
HDMI OUT
HDMI Cable
9
Connect HDMI output of the DVD to the HDMI input jack on the set. Select the HDMI input source
with SOURCE button.
WHITE
RED
GREEN
BLUE
RED
Game Systems
AUDIO
COMPONENT VIDEO GAME DVD CABLE BOX(// )
5. REMOTE CONTROL
Remote control instructions in TV mode
POWER
Switch on LCD TV when at standby mode or vice
versa.
MUTE
Press to mute the sound. Press again or press
VOL+ to unmute.
10
TV MENU
CCD
DISPLAY
VOL
VOL
CH
CH
-
+
-
+
OK
EXIT
EPGFAV
FAV
+
FAV
-
MTS
POWER
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you
are watching TV. The channel change after 2 seco-
nds.
Press this button to enter a program number for
multiple program channel such as 2-1,etc.
Return to the previous channel viewed.
TV MENU
Brings up the main menu to the screen.
EXIT
Clears all on-screen displays and returns to TV
viewing from any menu.
CCD
Closed caption button.
DISPLAY
Press to display the source and channel’s info-
rmation.
Press to cycle through the input source in following:
Ch
Composite Component
VGA
HDMI
SOURCE
S-VIDEO
PMODE
Press repeatedly to cycle through the available video
picture modes.
SMODE
Press to cycle through the different sound settings.
MTS
Audio selection button.
Lets you select amount of time before your TV turn
itself off automatically..
SLEEP
-
/
- -
-
/
- -
11
TV MENU
CCD
DISPLAY
VOL
VOL
CH
CH
-
+
-
+
OK
EXIT
EPGFAV
FAV
+
FAV
-
MTS
POWER
THUMBSTICK(/// /OKENTER)
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
VOL+/-
Press to increase / decrease the sound level.
CH+/-
Press to scan through channels. To scan quickly
channels, press and hold down either +/-button.
FAV
Press to increase the program which you favorite.
Press to enter the favorite menu.
FAV+
Press to descrease the program which you favorite.
FAV-
EPG
Press to enter the EPG menu directly.
-
/
- -
1.Open the cover
2.AA size batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks
on the batteries and within the battery compartment
3.Replace the battery cover
1.Install all batteries correctly, and as marked on the remote control.
2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)
Remove batteries when the remote is not used for a long time.
To prevent battery leakage which may result in bodily injury or damage to the remote:
Remote control setup
12
Basic operation
Turning on and off the TVTurning on and off the TV
TURN ON LCD TV
1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter
standby mode and indicator show red.
2. Use POWER button can turn ON LCD TV from standby mode.
TURN OFF LCD TV
1. Press POWER button or button on the remote control to enter standby mode. The indicator is red.
2. Using main power switch turns off LCD TV completely.
Select on screen languageSelect on screen language
NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying menus
and indications.
Press to display the main menu.
Press / repeatedly to select the .
Use / and / to select .
ress and button to select your desired language.
MENU
SET MENU
LANGUAGE
P
When you are satisfied with your choice, press the
to exit.
MENU
Volume adjustmentVolume adjustment
1. Press to adjust the volume.VOL+/-
2. If you want to switch the sound OFF , press the MUTE .
3. You can cancel this function by pressing or .MUTE VOL+
13
6. TV Operation
Audio
Setup
Feature
To Move To Select To Exit
Tuning Band
DTV-Signal
Auto Ch Search
AddOnChSearch
Manual Ch Set
Channel Labels
Air
Picture
Menu Language
English
Enter Menu
Reset
Choosing a TV channelChoosing aTVchannel
1. Using the CH+/CH- on the front panel or on the remote control.
Press to increase channel number.CH+
Press to decrease channel number.CH -
2. Using 0-9 digital buttons and -/--button
You can select the channel number by pressing 0 to 9 or -/--.
How to adjust the OSD screenHow to adjust the OSD screen
- Press the button to display the main menu.MENU
- Use / / / buttons to select and adjust the available menus.
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.
Selecting input sourceSelecting input source
You can select the input source by pressing the on the remote control or on the front panel.INPUT
3. Example:
To select 1-digit channel (e.g. Channel 5): Press the 5 button.
To select 2-digit channel (e.g. Channel 20): Press the -/-- button repeatedly to display -- then press 2, follow by 0.
To select 3-digit channel (e.g. Channel 103): Press the -/-- button repeatedly to display -- then press 1, follow by 0,
follow by 3.
Note: After select the digit button, the digit will be memorized.
Audio
Setup
Feature
To Move To Select To Exit
Tuning Band
DTV-Signal
Auto Ch Search
AddOnChSearch
Manual Ch Set
Channel Labels
Air
Picture
Menu Language
English
Audio
Setup
Feature
To Move To Select To Exit
Audio Mode
Audio Language
Bass 30
Treble 30
Balance 0
Voice
Picture
English
Enter
Menu
Enter Menu
Reset
14
Audio
Setup
Feature
To Move To Select To Exit
Tuning Band
DTV-Signal
Auto Ch Search
AddOnChSearch
Manual Ch Set
Channel Labels
Air
Picture
Menu Language
English
Enter Menu
Reset
Audio
Setup
Feature
To M ov e To Select To Exit
Time Set
Sleep Timer
Advanced Video Menu
Password Set
Parental Control
NTSC CC
Picture
Off
Enter Menu
ATSC CC
Digital Closed Caption
CC1
C1
S
Picture menu options
Press the MENU on the front panel or on the remote control and then use / to select the Picture menu.
In this manual, the OSD ( On Screen Display) may be different from your TV’ s because it is just example to help the
TV operation.
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
2. Press and button to adjust.
Contrast
Press / button and then use / to adjust the contrast of the picture.
Brightness
Press / button and then use / to adjust the brightness of the picture.
Sharpness
Color
Press / button and then use / to adjust the color saturation.
Press / button and then use / to adjust the sharpness level of picture.
1. Use / to select what you want to adjust in the
menu.Picture
Picture
Audio
Setup
Feature
To Move To Select To Exit
Picture Mode
Contrast 50
Brightness
Sharpness
Color
Tint
Aspect Ratio
User
Wide
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE
menu. You may select the picture mode directly by pressing the PMODE button on the remote control.
Picture Mode
Tint
Press / button and then use / to adjust the tint of picture.
Aspect Ratio
Press ◄/► to select the ratio of picture display such as Full-screen/Normal/ Zoom/ Wide and Cinema.
AUDIO menu options
Press MENU on the front panel or on the remote control and then use / to select the AUDIO menu.
15
Enter Menu
50
50
50
50
Ch
Composite
Component
VGA
HDMI
S-VIDEO
MENU operation
3. When you are satisfied with your adjustment, press
or to exit the main menu.MENU EXIT
2. Press and button to adjust.
1. Use / to select what you want to adjust in the
menu.Audio
Audio Language
Bass
Treble
Balance
Press / button and then use / to adjust the audio output between left and right speakers.
Press / button and then use / to increase or decrease the level of the lower-pitched sounds.
Press / button and then use / to increase or decrease the level of the higher-pitched sounds.
Setup menu options
Press MENU on the front panel or on the remote control and then use / to select the Setup menu.
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
2. Press and button to adjust.
1. Use / to select what you want to adjust in the
menu.Setup
Audio
Setup
Feature
To M o v e To S e l e c t To E x i t
Audio Mode
Audio Language
Bass 30
Treble 30
Balance 0
Voice
Picture
English
You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND
menu. You may select the sound mode directly by pressing the SMODE button on the remote control.
Audio Mode
Press ◄ / ►to select one of the audio language such as English/ French and Spain, but the condition is that the program
system has included the language code.
Audio
Setup
Feature
To M o v e To S e l e c t To E x i t
Tuning Band
DTV-Signal
Auto Ch Search
AddOnChSearch
Manual Ch Set
Channel Labels
Air
Picture
Menu Language
English
Tuning Band
Press key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.Enter
DTV-Signal
In DTV mode, you can tune manually and adjust the angle, orientation of the antenna etc
Enter Menu
Enter Menu
Reset
16
Auto Ch Search
Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press key to enter
your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically
saved as below:
Enter
Analog Channels Found
Autoprogram Menu
NTSC Channel 19
Digital Channels Found
Not Found
Progress(%) 12
2
0
Add On Ch Search
When the channels are found, use / to add it to the channel list.
ManualChSet
Press Enter button to display a channel list that you can select channel as below:
To Move To Change To Exit
Manual Channel Set Menu
Ch 42 -1 ATSCdmo Viewable
Ch 2 -0 Viewable
Ch 11 -0 Viewable
Ch 22 -0 Viewable
Ch 31 -0 Viewable
Ch 52 -0 Viewable
Ch 54 -0 Viewable
Ch 66 -0 Viewable
Ch 68 -0 Viewable
Channel labels
Allows you to name the channel that is selected. Use ◄ / ► to move the cursor and use ▲/▼ to input the name and then
press Menu or Enter to return or exit as following:
Channel Labels Menu
To Move To Change To Exit
Ch 42-1 ATSC dmo
Manual Language
To select language of the OSD such as English/ French and Spain.
Enter Menu
Menu
17
To S t o p
Menu
Feature menu options
Press MENU on the front panel or on the remote control and then use / to select the Feature menu.
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
2. Press and button to adjust.
1. Use / to select what you want to adjust in the
menu.Feature
Time Set
Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.
To Mov e To Change To Exit
Time Zone
Time Set Menu
Time Set Mode
Year
Date
Time
Auto
Pacific
Dec 29
12:00 AM
2006
Time Set Mode
You can select one of auto and manual to set the time.
When selected auto, the item of year/date and time will be
disabled and can not to adjust. When select the manual
mode, you can press ◄/► and ▲/▼ to set the corresponding
functions.
Time Zone
Press ◄/► to select the time zone such as Pacific/ Alaska/
Hawaii/ Eastern/ Central/Mountain.
Sleep Timer
Press ◄/► to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min
/60min/90min and OFF.
Advance Video Menu
Advance Video Menu
Press Enter to enter the advance video menu as below:
To Move
To Change
To Exit
Noise Reduction-- Speckle
Advance Video Menu
Noise Reduction--Spatial
Noise Reduction-- Temporal
Color Temperature
3D Y/C
Adaptive Contrast
Setting
Off
Off
Normal
On
Off
Preset
On
Enter Menu
Menu
18
Audio
Setup
Feature
To Move To Select To Exit
Time Set
Sleep Timer
Advanced Video Menu
Password Set
Parental Control
NTSC CC
Picture
Off
Enter Menu
ATSC CC
Digital Closed Caption
CC1
C1
S
- Noise Reduction--Spatial: press Enter to select on or off.
- Noise Reduction--Speckle: press Enter to select on or off.
- Noise Reduction--Temporal: press Enter to select on or off.
- Auto Contrast Enhancement: press Enter to select on or off.
- Color Temperature: press Enter to select one of Normal/Cool
and Warm.
- 3D Y/C: press Enter to select on or off.
- Adaptive Contrast: press Enter to select on or off.
- Setting: press Enter to return to the factory setting.
Password Set
Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the
password when you input the new one twice. The initial password is"0000".
Enter Old Password
*
Parental Control
Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password. The initial password is"0000".
Digital Closed Captions
This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:
To Move To Change To Exit
Size
Digital Closed Caption
Style
Font
Text Co l o r
Automatic
Automatic
Text Opacity
Background Color
Background Opacity
Edge Effect
Edge Color
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
DECIDED BY BROADCASTING
To Move To Select To Exit
Candlan Rating Menu
Candlan English Candlan French
E
C
C8+
G
PG
14+
18+
E
G
8ans+
13 ans+
16 ans+
18 ans+
Enter Menu
Menu
19
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
