Pyle PSRB8 User manual

Brand: Pyle

Model: PSRB8

Type: User manual

Pyle PSRB8 is a versatile and portable Bluetooth speaker that combines superior sound quality with a range of connectivity options. Unleash wireless music streaming and hands-free calling from Bluetooth-enabled devices. Enjoy a clear and immersive audio experience with its built-in speaker and support for AUX input. Stay connected to your favorite tunes wherever you go, thanks to its long battery life and compact design.

Tri-Way Clear Sound Bluetooth Shower Speaker

PSRB8

www.pyleaudio.com

User’s Manual

Function:

1) Bluetooth function, compatible with iPhone, iPad, Android smart phones and other

Bluetooth devices. No wires needed , Lets you enjoy music streaming wirelessly from

Bluetooth device and receive phone calls.

2) Built-in speaker, provides superior sound quality.

3) AUX IN, 3.5mm jack, can connect to your PC, VCD, DVD, TV or any other aux input

device.

4) USB charging function

Operation:

1), First slide the ON/OFF switch to ON position to turn on the unit. Press the

button PAIR, the Bluetooth LED indicator blinks fast. Search for the Bluetooth device

PSRB8 on the smart phone or iPhone device list and pair. When the device is con-

nected, the LED indicator blinks slowly.

2), Play and pause : Press once to play or pause the music.

3), Previous song : Press once to skip to previous song, press and hold to decrease

the volume.

4), Next song : Press once to skip to next song, press and hold to increase the

volume.

5), Aux in : While Bluetooth function is playing music, plug in AUX IN cable and listen

to music from external audio player. Bluetooth operation will be paused; any

incoming call from the mobile phone will wake up the Bluetooth function,

also see “Bluetooth Hand Free” section below.

Unplug Aux-in cable, Bluetooth automatically connects again.

6), LED indicator : While power on; Green indicates Bluetooth mode.

Amber (Red+Green) indicates charging status.

While power off; Red indicates charging status. When the unit is

fully charged, the indicator light is off.

7), Bluetooth Hand Free : When in Bluetooth mode, to answer incoming call, press

button to answer the phone. Press / button to adjust

incoming voice volume. When phone conversation is nished,

press to hang up. Press and hold for 3 seconds to dial

last number.

Warning:

1. Please use standard 5V/500mA DC adapter and supplied USB cable to charge unit;

Or connect USB cable to computer USB port to charge. If the adapter power is not

enough, it may cause unit not to be fully charged or shorten battery life.

2. Please do not use the unit in high temperature or moisture environment for long

periods of time.

3. When the unit malfunctions, the internal battery may need charged. The unit can

operate when charging battery.

Features:

Power Rating: 2W

Speaker: 4Ω3W

Noise-signal Ratio: >80dB

AUX IN: 3.5mm jack

Battery: built-in Lithium battery

Charge power: 5V 500mA

Bluetooth range: > 32 feet (The distance may vary in different

environments or with different Bluetooth devices)

Compliance with FCC Regulations:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guaranee

that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

www.pyleaudio.com

Important Safety Instructions:

1. Keep these instructions.

2. Heed these instructions.

3. Follow all instructions.

4. Do not charge the unit internal battery in a wet environment.

5. Only use attachments / accessories specied by the manufacturer.

6. Do not use the unit in places which are extremely hot, cold or dusty place.

7. Do not use or keep the unit in an area exposed to direct sunlight.

8. No naked ame sources, such as lighted candles, should be placed on the apparatus.

9. Do not open or disassemble this unit.

10. Take care not to drop the unit or subject it to strong shocks.

11. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Pyle PSRB8 User manual

Pyle PSRB8 User manual

Related papers

Other documents