RS232
DVI
RGB
USB
9
1
2 8
7
3
5
4
S-Video Output
DVD Player,
Settop Box,
HDTV receiver
Video Output
Audio Output
10
1. DVI to D-Sub Cable
2. VGA Cable
3. Composite Video Cable
4. 3 RCA Component Cable
5. S-Video Cable
6. Audio Cable Jack/Jack
7. Audio Cable Jack/RCA
8. USB Cable
9. DVI to DVI Cable (Optional
Accessory)
10.RS232 Cable (Optional
Accessory)
INSTALLATION
Quick Start
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the "VGA In" connector on the
projector; connect the other end to
the VGA connector on the
computer and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to
an electrical outlet.
Powering On the Projector
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remote AC power cord from
outlet until the projector fan shut
down.
English
INTERFACE CONNECTOR
6
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Optoma Projector User manual
-
Barco DICOM Theater Lite User manual
-
Sagem CP 110-X Owner's manual
-
Compaq 180226-001 - Microportable 1800 XGA DLP Projector User manual
-
Compaq 2800 - Microportable XGA DLP Projector User manual
-
Optoma X605 User manual
-
Dell 5100MP Projector User guide
-
-
Optoma Optoma TW775 User manual
-