Cap
Soap Dish
Backplate
Screw
0.7
Step 1:
Determine your desired location for installation and make a mark for the location . Make 2 marks where mounting screws will
be placed as shown below. Mark for location of installation.Drill hole at each end of the marks.
Drill holes in Wall for Backplate Mounting
Attach Double Post Tissue Holder
to Backplate
Step 2:
Unscrew Cap.Then mount Backplate to desired location and screw them in placed.Then insert Double Post Tissue Holder
into Backplate and screw Cap.
424G
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Allied Brass 424-PNI Installation guide
-
-
Unbranded FT-24U-SBR Installation guide
-
-
Allied Brass 432T-UNL Installation guide
-
-
-
Allied Brass FT-32-WHM Installation guide
-
-
Other documents
-
Mira EXCEL Installation & User Guide
-
-
-
-
-
Kenroy Home 32611ORB Installation guide
-
AT&T 8000 User manual
-
-
Gentex HGU-84/P Operating instructions
-
