Mr Steam 103937PN Installation guide

103937PN
Mr Steam
Brand
Mr Steam
Model
103937PN
Type
Installation guide
3
”
2
3
/
4
”
3
”
3”
7
/
8
”
03”
1
”
• Even distribution of steam while
remaining cool to the touch
• No field assembly required
• No moving parts
• Integrated aromatherapy oil
well for in shower use
Round & Square Steamhead Installation (
1
⁄2" NPT)
IMPORTANT: Do not disassemble steamhead. MrSteam’s steam
head is shipped fully assembled and requires no additional assembly.
Because the steamhead and direct steam emissions
are very hot, locate the steamhead where incidental contact by
bather with the steamhead or direct steam emission cannot occur.
NOTE: A 1.5” clearance hole around the steam pipe is needed
to mount the steamhead.
Locate steamhead 6-12 inches above floor, except for:
• Tub/shower enclosures, install 6 inches above tub top edge.
• For enclosures with acrylic or other non-heat resistant flooring
install Acrylic Shield Part Number 103938 /10398SQ
IMPORTANT NOTE: To preserve steamhead finish,
do not use wrench or other tools to tighten. DO NOT
use abrasive cleansers or chemicals. Use only water
with mild soap and a non-abrasive sponge.
mr
.
steam
®
Technical Specifications
AromaSteam Steamhead
Round
103937
, Square
104040
,
104104
TS0010 8.18
mr
.
steam
®
Sussman-Automatic Corp
®
[email protected] www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 TEL: 1 800 76 STEAM FAX: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 TEL: 1 800 72 STEAM FAX: 310 216 2944
Steam
Supply Pipe
End of pipe to be recessed
1/4" (without Acrylic Shield)
1/8" (with Acrylic Shield)
1
/8" minimum clearance required
when Acrylic Shield is used. See
installation instructions provided
with the Acrylic Shield
.
Apply with silicone or
equal sealant as required
for moisture seal.
Use Teflon
®
or equal
sealant on pipe threads
MODEL FINISH** PROJECT INFORMATION
103937-Round
BB Brushed Bronze
104040-Square
BN Brushed Nickel
104104*
ORB Oil Rubbed Bronze
PB Polished Brass
SB Satin Brass
PC Polished Chrome
PN Polished Nickel
BLK Black***
WH White***
MB
Matte Black
RAW
Custom Plating
Location:
Architect:
Engineer:
Contractor:
Submitted By:
Date:
Notes:
* 104104 Steamhead is used for AirTempo, iSteam and black/white facia iTempo and iTempoPlus.
** For AirTempo select black or white with a decorative finish
***iSteam, black/white fascia iTempo and iTempoPlus are provided with matching glass face and chrome trim only.
Consult with supplier of acrylic, fiberglass
and other non-heat resistant enclosures for recommended
steamhead location. Use Acrylic Shield PN 103938/
103938SQ. See instructions provided with steam shield. (An
acrylic shield is not available for the iSteam steamhead.)
!
CAUTION
!
CAUTION
FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION visit mrsteam.com
before installation to download the Installation, Operation and Maintenance Manual or refer to the manual provided with the unit.
103937 104040 104104
  • Page 1 1

Mr Steam 103937PN Installation guide

103937PN
Mr Steam
Brand
Mr Steam
Model
103937PN
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents