WAYDE KING WATER FILTRATION WK-WH-ARS-1252 Installation guide

Brand: WAYDE KING WATER FILTRATION

Model: WK-WH-ARS-1252

Type: Installation guide

This manual is also suitable for

WK-WH-VOC-1054

WAYDE KING WATER FILTRATION WK-WH-ARS-1252 is a whole house water filtration system designed to provide clean, filtered water for your entire home. It uses a multi-stage filtration process to remove impurities, sediment, chlorine, and other contaminants, resulting in improved water quality for drinking, cooking, bathing, and more. The system features an automatic backwashing function that helps maintain optimal performance and prolongs the life of the filter media. It also includes a control valve that allows you to easily adjust settings and monitor system status.

PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com | Technical Support Ph: 866.475.3585 | 

5502 S. Fort Apache Rd. Suite# 100 | Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | 

ARRIVAL, UNPACKING, AND INSPECTION

SYSTEM LOCATION









present, which includes the unit and installation hardware.



a) there are no physical damages to the system,

b) all accessories are present,

 

CHECK LIST WATER FILTER SYSTEM







backwashing and backwash programming







are packaged in a plastic bag. To avoid loss



until you are ready to use them. Be sure not

to discard components hidden in packaging.



backwash programming

Read all instructions carefully to learn the details for installing

and using your Whole Home Municipal and Well Water

Treatment System. Failure to follow the Installation and

Operation Guide could cause injury and/or property damage.

Select the location of your water

ﬁlter system with care. For correct

installation, refer to the appropriate

diagram.

Various conditions which contribute to



• Do not locate the system where the



water contamination.

• Do not put any liquid other than water

into the system.



supply line, drain and electrical outlet.

Position so that main water supply shut-



main water source.



while installing system.







and shim to level as needed.



BEFORE the water heater.

• Water temperatures above 100°F (38°C)



water line only.









(automatic system).

TYPICAL INSTALLATION AND SYSTEM LOCATION

The system needs to be installed by a licensed plumber in your area.

Whole House Water Filter System Installation

DOWNFLOW WITH NO BACKWASH WATER FILTER SYSTEMS







RISER TUBE

SLIP CAP

TOP

DISTRIBUTOR

CONTROL

VALVE

1 2 3 4

Unscrew and remove the top



Attach control valve to the tank by sliding distributor

tube into top distributor. Turn control valve clockwise

to tighten. Distributor tube needs to be equal to the



Lubricate the inner O-ring prior to attaching the

control valve to the tank.

Attach bypass valve to the back ports



bypass over the O-rings and tighten (it

is held in place by two metal clips and

two screws).

To prevent leaks, wrap threads



nut with thread seal tape



around.







To prevent leaks, lubricate

the inner and outer O-rings





silicone lubricant.

Twist and lock top distributor





CONTROL

VALVE

TOP

DISTRIBUTOR

DISTRIBUTOR TUBE



DRAIN LINE

HOSE BARB

COMPRESSION NUT

TANK

5 6 7

PROGRAMMING AUTOMATIC CONTROL VALVE

PROGRAMMING OZONE CONTROL VALVE

BACKWASH BASELINE

OZONE CONTROL VALVE

Programming to Backwash and Regenerate

using an Automatic Valve

*For more about Automatic Valve and

Time Clock settings, please refer to

our “Frequently Asked Questions” on

Page 14.

1) Use the up or down arrows to set

the time to 12:01 PM. Once the time is

changed to 12:01 PM, push the Recycle



2) Push and hold both arrow buttons until

screen changes to read 

3) Push Recycle button. Screen will read



not need to be changed.

4) Push Recycle button. Screen should

read



5) Push Recycle button. Screen will read



the timer is controlling (one tank). Do

not change this.

6) Push Recycle button. Screen should

read 

buttons to set number to 7.

7) Push Recycle button. Screen should

read 

arrow buttons to set to 2:00.

8) Push Recycle button. Screen should

read 

arrow buttons to set to 10.



be 

buttons to change screen to read .

10) Push Recycle button. Screen will

change to time display and

programming is locked in.

For municipal water we recommend the

system being backwashed every 5 days at 2am,



asleep. For well water the system should be

backwashed every 2 days at 2am. The better

your water the less backwashing is needed. To

set the backwash be on the main screen:

1) Press NEXT and UP



does not appear, the lock on the valve is

activated. To unlock press DOWN, NEXT,

UP, REGEN in sequence, then press UP and

DOWN

release.



A1 A2

SET

REGEN

DAY

Regen Day - Use UP or DOWN to adjust the



Press the NEXT button to go to Step 3.

Press REGEN to return to previous step.

SET TIME

REGEN

2:00

Regeneration Time Minute - Use UP or

DOWN

Press the NEXT button to go to Step 5.

Press REGEN to return to previous step.

SET TIME

REGEN

2:00

Not used in this application.

Press NEXT to EXIT installer set-up.

SET

NORMAL

L7off

Regeneration Time Hour - Use UP or

DOWN

Press the NEXT button to go to Step 4.

Press REGEN to return to previous step.

PROGRAMMING OZONE CONTROL VALVE CONTINUED

PROGRAMMING OZONE CONTROL VALVE

SETTING THE TIME

NOTES

1) Press NEXT and DOWN simultaneously

and release. Press NEXT and DOWN



Step 2 does not

appear, the lock on the valve is activated.

To unlock, press DOWN, NEXT, UP

and CLOCK in sequence, then press NEXT

and DOWN

and release. Press NEXT and DOWN



Press CLOCK once. Press UP or DOWN

until your hour is correct and the correct

NEXT to select

the minutes (select UP or DOWN until the

minutes are correct). Select CLOCK to get

back to the main screen.



happen while you are sleeping.

2) The Relay Actuation Time is when the





The entire process will take 37 minutes,



leaving adequate time to vent.

SET

FILTERING

REGEN

Use UP or DOWN to select FILTERING

REGEN. Press NEXT to go to Step 3. Press

REGEN

SET TIME

BACKWASH

MIN

1 10

SET TIME

MIN

15:00

SET TIME

MIN

37:00

Use UP or DOWN to adjust backwash

time (we suggest 10 minutes). Press NEXT

to go to Step 4. Press REGEN to return to

previous step.

SET

BRINE

MIN

2 30

2 dn

Step 4 alternates between the two

displays shown. Use UP or DOWN to adjust

brine time (we suggest 30 minutes). Press

NEXT to go to Step 5. Press REGEN to

return to previous step.

SET

BACKWASH

MIN

3 off

Use UP or DOWN to set RINSE to OFF. Press

NEXT to go to Step 7. Press REGEN to return

to previous step.

SET

RINSE

4 off

Use UP or DOWN to set FILL to OFF. Press

NEXT to go to Step 8. Press REGEN to return

to previous step.

SET

GAL

FILL

5 off

Use UP or DOWN to set REGEN to OFF.

Press NEXT to go to Step 9. Press REGEN to

return to previous step.

SET

REGEN

off

Step 9 alternates between the two

displays shown. Use UP or DOWN to set

RELAY 1 to ON. Press NEXT to go to Step

10. Press REGEN to return to previous step.

10)

SET

0ff



Use UP or DOWN to set RELAY 1 to 15.

Press NEXT to go to Step 11. Press REGEN

to return to previous step.

11)

Use UP or DOWN to set 2nd backwash to

OFF. Press NEXT to go to Step 6. Press

REGEN to return to previous step.

Step 10 sets Relay Actuation Time, when















means the relay will turn on the EOG unit 1

REMAINING



EOG unit is activated. Use UP or DOWN to



minutes. Press NEXT to go to Step 12.

Press REGEN to return to previous step.

12)

SET

0ff

Step 12 alternates between the two

displays shown. Use UP or DOWN to set

RELAY 2 to OFF. Press NEXT to EXIT

REGEN to

return to previous step.

CONNECTING WATER FILTER SYSTEM TO WATER SUPPLY AUTOMATIC

MINIMUM MATERIALS NEEDED











incoming water line near where the

system is to be installed. Allow this line to

drain thoroughly (Fig 8).





assembly and attach your plumbing



valve. This simple step will ensure that you

are not applying heat as you solder, or

pressure as you tighten the adapters onto

the bypass while they are mounted on the









threading each one onto the yoke or

bypass valve (Fig 9).

• Apply thread seal tape onto the male



cool, and securely tighten them to the











and drain plumbing lines.



the system

• Wrenches, either open end or adjustable



• Pipe cutter

• Thread seal tape

• Sandpaper or emery cloth











• Soldering is no longer required to plumb





as shown below (Fig 10), choosing



automatic control valve.

CAUTION: Do not overtighten or

cross-thread.

CAUTION: Install water ﬁlter in

direction of arrows.

(Choose appropriate connection below)

INLET

OUTLET











to ensure that they are square and

smooth.

Check plumbing inlet and outlet to



through the unit. Match plumbing

inlet and outlet with arrows located



the bypass valve.

Connecting to galvanized pipe Connecting to plastic pipe Connecting to copper pipe

WAYDE KING WATER FILTRATION WK-WH-ARS-1252 Installation guide

Brand: WAYDE KING WATER FILTRATION

Model: WK-WH-ARS-1252

Type: Installation guide

This manual is also suitable for

WK-WH-VOC-1054

Download PDF

report

WAYDE KING WATER FILTRATION WK-WH-ARS-1252 Installation guide

This manual is also suitable for

WAYDE KING WATER FILTRATION WK-WH-ARS-1252 Installation guide

Related papers

Other documents