2. Golden Lighting
  3. 5019-6SF-S BLK

Golden Lighting 5019-6SF-S BLK Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 5019-6SF-S BLK Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions: 5019-3/3SF & -6/6SF (Alyssa)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
For Customer Service, please
contact the place of purchase.
CONNECTING THE WIRES
4.Haveanassistantsupportthextureweightwhilecompletingthewiring.Cutawayexcesswire.
Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(or
smooth);whitetowhite(orribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairs
together,thentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisno
groundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)onmountingstrap(B)and
wrapthexturegroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecureground
screw(E)ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
Please note that the xture may be hung as a
pendant or a semi-ush mount. Please decide
how you would like the xture to be installed
and refer to the corresponding instructions.
FINISHING THE INSTALLATION
5.Raisecanopy(G)totheceiling.Positionmountingscrews(A)sothattheyprotrudethroughtheopeningsofcanopy(G).Securecanopy
(G)tomountingstrap(B)withdecorativenuts(F).
6.Slidecandlesleeves(P)overthesockets.
Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donot
exceedthemaximumrecommendedwattage.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
SEMI-FLUSH INSTALLATIONS
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
G
A
C
B
F
E
D
Q
O
P
R
T
N1
S
Diagram 1
F
Q
R
N2
N1
O
P
T
G
A
C
B
E
D
S
Diagram 2
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completely remove the old xture from the ceiling, including the
old mounting strap.
1.Mountingstrap(B)containsseveralpairsofthreaded
holesandmayhavetwoofmountingscrews(D)
attached.Ifso,youmayneedtotightenhexnuts(C)
thatholdthescrewsinplace.Ifmountingstrap(B)does
nothavemountingscrews(A)attached,pleasend
thescrewsandhexnutsandattachthescrewstothe
mountingstrap.
2.Testcanopy(G)tomountingstrap(B)toensurethat
withthescrewsinplacethecanopycanattachtothe
mountingstrapwithdeconuts(F).Adjustmounting
screws(A)untilthisispossible.Placethecanopyand
deconutsaside.Securemountingstrap(B)tothe
junctionboxwithmountingscrews(D)andascrewdriver.
Tightenthescrewssecurely.
3.Placethelampbodyonaatsurface.Placeshade
(P)ontoframe(T).Onesideofconnectorrods(N1)and
(N2)hasthexture’swiresinside.For the shortest
installation (Diagram 1), please remove connector
rod (N2). Unscrew hook (S) from (N2) and attach it to
connector rod (N1). Hookconnectorrods(N1)and/or
(N2)totheframeatloops(Q).Pullthexture’swiresuntil
taut.Attachthetopofconnectorrods(N)ontoplate(R).
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
PENDANT INSTALLATION - PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes
above. Shut off the power at the circuit breaker and completely remove
the old xture from the ceiling, including the old mounting strap.
1.Mountingstrap(B)containsseveralpairsofthreadedholesandmayhave
twoofmountingscrews(D)attached.Ifso,youmayneedtotightenhex
nuts(C)thatholdthescrewsinplace.Ifmountingstrap(B)doesnothave
mountingscrews(A)attached,pleasendthescrewsandhexnutsandattach
thescrewstothemountingstrap.
2.Testcanopy(G)tomountingstrap(B)toensurethatwiththescrewsin
placethecanopycanattachtothemountingstrapwithdeconuts(F).Adjust
mountingscrews(A)untilthisispossible.Placethecanopyanddeconuts
aside.Securemountingstrap(B)tothejunctionboxwithmountingscrews(D)
andascrewdriver.Tightenthescrewssecurely.
3.Placethelampbodyonaatsurface.Placeshade(P)ontoframe(T).One
sideofconnectorrods(N1)and(N2)hasthexture’swiresinside.Please
note: you may choose to remove one of the connector rods. You can
remove connector rod (N2). Unscrew hook (S) from (N2) and attach it to
connector rod (N1). Hookconnectorrods(N1)and/or(N2)totheframeat
loops(Q).Pullthexture’swiresuntiltaut.Attachthetopofconnectorrods
(N) onto plate (R).
4. Measuretodeterminethecorrectnumberofrodsneededforproper
hangingheight.Tolengthenthexture,addadditionalrods.Ifadditionalrods
areneeded,contacttheplaceofpurchasetoorder.Toshortenthexture,add
atleast8to10inchesofwiretothedesiredlengthandtrimthewires.Slide
anyexcessrodsoffthexture’swirestodiscard.
5. Pull the wires taut through the rods before threading the rods together.
Threadbottomrod(K orL) ontopost (M)at thecenter ofthe xture’s body.
Twisttoprod(KorL)intothethreadsofswivelpost(I)ofcanopy(G).Lockthe
rod(s)inplacebytwistingthumbscrew(G).Pullthexture’swiresthroughthe
topofcanopy(G).
FINISHING THE INSTALLATION
7. Raisecanopy(G)totheceiling.Positionmountingscrews(A)sothattheyprotrudethroughtheopeningsofcanopy(G).Securecanopy(G)
tomountingstrap(B)withdecorativenuts(F).
8.Slidecandlesleeves(P)overthesockets.
Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donot
exceedthemaximumrecommendedwattage.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
CONNECTING THE WIRES
6.Haveanassistantsupportthextureweightwhilecompletingthewiring.Cutaway
excesswire.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.
Connectblacktoblack(orsmooth);whitetowhite(orribbed);groundtoground(green
orcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.
Makesurealltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)
fromthejunctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthe
xture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecure
groundscrew(E)ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
Assembly Instructions: 5019-3/3SF & -6/6SF (Alyssa)
For Customer Service, please
contact the place of purchase.
Please note that the xture may be hung as a
pendant or a semi-ush mount. Please decide
how you would like the xture to be installed
and refer to the corresponding instructions.
G
Q
R
T
O
S
N2
N1
P
G
N
D
L
L
K
L
A
E
D
B
C
F
I
M
/