Golden Lighting 2712-BA3 AS-OP Installation guide

Type
Installation guide

Golden Lighting 2712-BA3 AS-OP is a wall-mounted light fixture designed for indoor use. It features a stylish design with a backplate and deco nuts, and is easy to install with the included mounting strap and screws. The fixture comes with two glass shades that can be secured with socket rings, and uses standard light bulbs (not included).

The fixture requires professional installation and should be connected to a power supply by an accredited electrician. It is important to note the maximum wattage specified for the light bulbs to avoid exceeding the fixture's capacity.

Golden Lighting 2712-BA3 AS-OP is a wall-mounted light fixture designed for indoor use. It features a stylish design with a backplate and deco nuts, and is easy to install with the included mounting strap and screws. The fixture comes with two glass shades that can be secured with socket rings, and uses standard light bulbs (not included).

The fixture requires professional installation and should be connected to a power supply by an accredited electrician. It is important to note the maximum wattage specified for the light bulbs to avoid exceeding the fixture's capacity.

IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold
mountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)containsthreadedholes.Twoofmountingscrews(A)
shouldbeattachedtomountingstrap(B).Youmayneedtotightennuts(C)thatholdthesescrewsinplace.Ifthescrewsarenot
attached,pleaseholdbackplate(F)uptomountingstrap(B).Lineuptheholesinbackplate(F)withtheholesinmountingstrap
(B)andinsertmountingscrews(A)intomountingstrap(B)sothatmountingscrews(A)protrudethroughtheholesinbackplate(F).
Mountingscrews(A)arelong,sopleasetestbackplate(F)againstthemountingstrapandpracticethreadingdeconuts(G)onto
mountingscrews(A)toseehowfaryoushouldinsertmountingscrews(A).Removethedeconutsandbackplate.Tightennuts(C)
ontomountingscrews(A)toholdthescrewsinplace.
2.Securemountingstrap(B)tothejunctionboxwithmountingscrews(D)andascrewdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagrambelowandattachthe
xture’swirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twist
theendsofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisno
housegroundwirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapandwrapthe
xture’sgroundwirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothe
mountingbracket/mountingstrap.Tuckthewiresintothejunctionbox.
AssemblyInstructions:2712-BA3 (Hollis)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
FINISHING THE INSTALLATION
4.Placethexture’sbackplate(F)overmountingscrews(A)sothatmountingscrews(A)protrudethroughtheholesinthefrontof
backplate(F).Threaddeconuts(G)ontomountingscrews(A).Twistuntilthebackplateofthextureissnugagainstthewall.Check
thatthebackplateisstraight.
5.Slideglassshades(P)oversockets(N)andsecuretheglassinplacewithsockettool(L)andsocketrings(Q).
6.Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended
wattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
For Customer Service, please
contact the place of purchase.
Front View
P
Q
L
N
F
E
A
H
B
D
C
  • Page 1 1

Golden Lighting 2712-BA3 AS-OP Installation guide

Type
Installation guide

Golden Lighting 2712-BA3 AS-OP is a wall-mounted light fixture designed for indoor use. It features a stylish design with a backplate and deco nuts, and is easy to install with the included mounting strap and screws. The fixture comes with two glass shades that can be secured with socket rings, and uses standard light bulbs (not included).

The fixture requires professional installation and should be connected to a power supply by an accredited electrician. It is important to note the maximum wattage specified for the light bulbs to avoid exceeding the fixture's capacity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI