Noble House 53114 Operating instructions

Brand
Noble House
Model
53114
Type
Operating instructions

This manual is also suitable for

Noble House 53114 is a versatile and durable piece of furniture, perfect for both indoor and outdoor use. With its sturdy construction and easy assembly, it's a great choice for any home or office.

The 53114 is made from high-quality materials, including a solid wood frame and a durable laminate top. It's also easy to clean and maintain, making it a great choice for busy families.

The 53114 is also highly customizable. It comes with a variety of different leg options, so you can choose the perfect look for your space. You can also add on additional shelves or drawers to create a storage solution that meets your specific needs.

Noble House 53114 is a versatile and durable piece of furniture, perfect for both indoor and outdoor use. With its sturdy construction and easy assembly, it's a great choice for any home or office.

The 53114 is made from high-quality materials, including a solid wood frame and a durable laminate top. It's also easy to clean and maintain, making it a great choice for busy families.

The 53114 is also highly customizable. It comes with a variety of different leg options, so you can choose the perfect look for your space. You can also add on additional shelves or drawers to create a storage solution that meets your specific needs.

Assembly Instructions
Caution: You must read this before you proceed
Chair
Parts List
Label
Picture
Description
QTY
A
Backrest Panel
1
B
Seat Panel
1
C
First Leg Panel
1
D
Second Leg Panel
1
Hardware
Label
Picture
Description
QTY
①
Screw (M6x80mm)
7
②
Allen Key
1
Assembly Preparation
Before Beginning Assembly:
Assembly Steps
Overview
This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Unpack and place all parts on a clean, non-marring surface.
Backrest Panel (A)
Second Leg Panel (D)
First Leg Panel (C)
Seat Panel (B)
2.1) Position First Leg Panel(C) and Backrest Panel(A) to Seat Panel(B).
2.2) Attach Second Leg Panel(D) to Backrest Panel(A), and Seat Panel(B) using Screws(①) with
Allen Key(②).
Do not fully tighten the Screws.
Note: Be sure to position the Seat Panel correctly as indicated by the label "Front"
D
2.1
B
C
A
2
1
1
2
C
D
A
B
F
r
o
n
F
r
o
n
F
r
o
n
2.2
With assistance from an adult partner, turn the Chair Frame over onto the other side.
Attach First Leg Panel(C) to Backrest Panel(A), and Seat Panel(B) using Screws(①) with Allen
Key(②).
Do not fully tighten the Screws.
Place the Chair on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Chair to some 30cm to 50cm high from the ground. Keep your feet and toes
well away from the drop zone.
Drop the Chair freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the Screws and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, proceed to tighten all the Screws.
When tightening the Screws, tighten sequentially.
DO NOT tighten any Screw fully and then move on towards the next one.
This could cause the frame to warp.
If there are still wobbles, loosen the Screws and execute this same drop test.
Your Chair is ready to use.
This Chair can only be used on a flat, level surface
Caution : You must read this before you proceed
TABLE
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Table and to prevent damage to the Table, 02 persons may be needed
to execute this action.
Noble House Home Furnishings LLC
Page 1 of 8
Label Picture Description QTY
A Table Top 1
B First leg 2
C Second leg 2
D Wooden pad 4
Label Picture Description QTY
j
Bolt
(M8x50mm)
9
k
Long Screw
(M6x55mm)
5
l
Short Screw
(M5x40mm)
13
m
Spring Washer
(M8.5/14x2mm)
9
n
Flat Washer
(M8.5/20x2mm)
9
Allen Key 1
Screw driver Not provided
Noble House Home Furnishings LLC
Page 2 of 8
Before Beginning Assembly:
Noble House Home Furnishings LLC
Page 3 of 8
Step 1
Overview
This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview
of the Table parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
FRONT FACING
Table top (A)
Second leg (C)
First leg (B)
Wooden pad (D)
Noble House Home Furnishings LLC
Page 4 of 8
Step 2
2.1) With assistance from your adult partners, turn the Table Top (A) up side down as picture shown
2.2) Attach First Leg (B) to Table Top (A) as shown in picture above.
Affix the leg (B) with the block by using Bolts (①), Spring Washer (④), Flat Washer (⑤) and Allen
Key (⑥) as shown in picture above.
Affix the leg (B) with the table top (A) by using Long Screw (②) and Allen Key (⑥) as shown in
picture above.
Repeat the same process to attach the other 1 First Leg (B) into the opposite corner of the Tabe Top.
Do not fully tighten the Bolts/Screws.
A
B
Step 2.1
Step 2.2
k
Noble House Home Furnishings LLC
Page 5 of 8
Step 3
Step 4
Attach the Wooden pad (D) to the table by using Short Screws (
③
) and Screw driver (
⑦
) as shown in
picture below.
Repeat the same process to attach 3 remaining Wooden pads (D) to the table.
Do not fully tighten the Screws.
Attach Second Leg (C) to Table Top (A) as shown in picture above.
Affix the leg (C) with the block by using Bolts (
①
), Spring Washer (
④
), Flat Washer (
⑤
) and Allen
Key (⑥) as shown in picture above.
Affix the leg (C) with the table top (A) by using Long Screw (②) and Allen Key (⑥) as shown in
picture above.
Repeat the same process to attach the remaining Legs (C) into the Table Top (A).
Do not fully tighten the Bolts/Screws.
A
C
B
k
D
A
C
B
Noble House Home Furnishings LLC
Page 6 of 8
Step 5
With assistance from your adult partners, turn the Table back to normal flat ground
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Page 7 of 8
Page 8of 8
OUTDOOR
Noble House Home Furnishings LLC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Noble House 53114 Operating instructions

Brand
Noble House
Model
53114
Type
Operating instructions
This manual is also suitable for

Noble House 53114 is a versatile and durable piece of furniture, perfect for both indoor and outdoor use. With its sturdy construction and easy assembly, it's a great choice for any home or office.

The 53114 is made from high-quality materials, including a solid wood frame and a durable laminate top. It's also easy to clean and maintain, making it a great choice for busy families.

The 53114 is also highly customizable. It comes with a variety of different leg options, so you can choose the perfect look for your space. You can also add on additional shelves or drawers to create a storage solution that meets your specific needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents