StyleWell 37-4801-01 Installation guide

Brand: StyleWell

Model: 37-4801-01

Type: Installation guide

1A 1B

1C

Installation Instructions StyleWell Roller Shades

Outside mounting

Inside mounting

Ceiling mounting

2A

1

2

2B

1

3

Installation for the shade with adjustable square pin end: Install the left end of the roller into the bracket(see Fig. 1), then depress the adjustable square pin

end and mount into the bracket(see Fig. 2 & 3)

2

Installation for the shade with non-adjustable square pin end: Install the left end of the roller into the bracket(see Fig. 1), then mount the square pin end into the

bracket(see Fig. 2)

Pull the shade down to test the tension strength

2

1

Loose or weak tension

If the shade rolls up too slowly

3

Pull the shade down to test the tension strength

1

If the shade goes up too quickly

Over tension

Turn the adjusting dial clockwise to increase lifting

speed

Turn the adjusting dial counter clockwise to slow

down the lifting speed

2

3

Stop position alteration

If you want the shade stop at a lower position

2A1A

Just remove the stop end plug square pin end from the

bracket. Keep the opposite end of the roller on the

bracket and avoid removing from the bracket

Unroll the shade down to the required position by

hand evenly, then replace the square pin end on the

bracket

3A

If you want the shade stop at a higher position

1B

2B

Just remove the stop end plug square pin end from the

bracket. Keep the opposite end of the roller on the

bracket and avoid removing from the bracket

3B

Roll up the shade to the required position by hand

evenly, then replace the square pind end on the

bracket.

1
2
3
4

StyleWell 37-4801-01 Installation guide

Brand: StyleWell

Model: 37-4801-01

Type: Installation guide

Other documents