Wacker Neuson RD45-140C US User manual

Type
User manual

This manual is also suitable for

Instruction manual
Tandem roller / Combination roller
RD 40 US / RD 45 US
Roller type RD 40 US / RD 45 US
Issue 02
Document order number
Language
As from serial number:
5100028171
en-fr
WNCR1001LHAA00160
2
BA RD 40 US / RD 45 US en* 00*
Manufacturer
Wacker Neuson Produktion GmbH & Co. KG
Preußenstraße 41
80809 München
www.wackerneuson.com
Phone: +49-(0)89-354 02-0
Fax: +49-(0)89-354 02-390
Original instruction manual
created:
changed:
01.12.2015
11.01.2016
BA RD 40 US / RD 45 US en* 00*
3
This instruction manual is valid for the following roller types:
TANDEM ROLLER RD 40-130 US
RD 40-130 O US
RD 45-140 US
RD 45-140 O US
COMBINATION ROLLER RD 40-130 C US
RD 45-140 C US
Table of Contents
4
BA RD 40 US / RD 45 US en* 00*
TABLE OF CONTENTS
1 Foreword................................................................................................................ 11
1.00 Introduction....................................................................................................... 12
1.00.01 Preface to the instruction manual........................................................................................ 12
1.00.02 Product information.............................................................................................................. 12
1.00.03 Warranty............................................................................................................................... 12
1.00.04 Modifications / reservations..................................................................................................13
1.00.05 Packaging and storage........................................................................................................ 13
1.00.06 Signs and symbols...............................................................................................................13
1.00.07 Signal words.........................................................................................................................14
1.01 Documentation.................................................................................................. 15
1.02 Use......................................................................................................................16
1.02.01 Intended Use........................................................................................................................ 16
1.02.02 Abnormal use....................................................................................................................... 17
1.02.03 Residual risks....................................................................................................................... 17
1.02.04 Climatic conditions............................................................................................................... 18
1.03 Environmental protection................................................................................ 19
1.04 Disposal............................................................................................................. 19
1.05 Type plate.......................................................................................................... 20
1.06 Noise and vibration requirements.................................................................. 23
1.07 Personnel...........................................................................................................24
1.07.01 Qualification and duties........................................................................................................24
1.08 General safety instructions............................................................................. 26
1.09 Danger zone...................................................................................................... 27
1.10 Loading and transporting................................................................................ 28
1.11 Stickers on the machine..................................................................................33
1.11.01 Warning labels......................................................................................................................33
1.11.02 Information sign....................................................................................................................35
2 Description.............................................................................................................39
2.00 Technical characteristics of the machine...................................................... 40
Table of Contents
BA RD 40 US / RD 45 US en* 00*
5
2.01 General view of machine................................................................................. 41
2.01.01 Chassis / safety devices.......................................................................................................41
2.01.02 Control stand........................................................................................................................ 42
2.01.03 Drive unit / diesel engine..................................................................................................... 43
2.01.04 Hydraulic oil supply..........
.................................................................................................... 44
2.01.05 Electrical equipment............................................................................................................. 45
2.01.06 Drive..................................................................................................................................... 47
2.01.07 Steering system....................................................................................................................48
2.01.08 Water system........................................................................................................................48
2.01.09 Vibration / Oscillation............................................................................................................49
2.02 General view of instruments
and operating elements..................................50
2.02.01 Control stand........................................................................................................................ 50
2.02.02 Transmission........................................................................................................................ 55
3 Operation............................................................................................................... 56
3.00 Instruments and operating elements............................................................. 57
3.00.01 Indicators, displays...............................................................................................................57
3.00.02 Pilot lights............................................................................................................................. 57
3.00.03 Switch................................................................................................................................... 62
3.00.04 Sockets, lights...................................................................................................................... 70
3.00.05 Operating levers, adjustment handles................................................................................. 70
3.01 Prior to machine start...................................................................................... 74
3.02 Engine start....................................................................................................... 76
3.03 Driving................................................................................................................78
3.04 Driving with vibration / oscillation.................................................................. 81
3.05 Stopping, switching off engine, leaving machine......................................... 83
3.06 Operation monitoring....................................................................................... 85
3.06.01 Filling levels..........................................................................................................................85
3.06.02 Pilot lights............................................................................................................................. 85
3.06.03 Diagnostic code....................................................................................................................86
3.06.04 Exhaust gas treatment with diesel particulate filter (DPF)...................................................87
3.07 Water sprinkling................................................................................................91
3.08 Additive sprinkling........................................................................................... 93
Table of Contents
6
BA RD 40 US / RD 45 US en* 00*
3.09 Scraper...............................................................................................................94
3.09.01 Roller drum scraper, top...................................................................................................... 94
3.09.02 Roller drum scraper, down...................................................................................................95
3.09.03 Scrapper tyres...................................................................................................................... 95
3.10 Track offset........................................................................................................96
3.11 Battery cut-off (battery isolating switch)....................................................... 97
3.11.01 Operation.............................................................................................................................. 97
3.12 Start with jump leads....................................................................................... 99
3.13 Towing..............................................................................................................101
3.14 Driving on public roads................................................................................. 104
3.14.01 Applicable in the User's Country........................................................................................104
4 Maintenance.........................................................................................................105
4.00 General maintenance instructions................................................................106
4.00.01 Operation monitoring..........................................................................................................106
4.00.02 Maintenance overview........................................................................................................106
4.00.03 Running-in regulations....................................................................................................... 109
4.00.04 Important information about maintenance works............................................................... 109
4.00.05 Safety strut......................................................................................................................... 111
4.00.06 Welding works on the machine..........................................................................................112
4.01 Chassis / safety features............................................................................... 113
4.01.01 General............................................................................................................................... 113
4.01.02 Checking the function of the parking brake....................................................................... 113
4.01.03 Checking EMERGENCY STOP function........................................................................... 114
4.02 Drive unit - diesel engine.............................................................................. 115
4.02.01 General............................................................................................................................... 115
4.02.02 Maintenance points at the Diesel engine when changing oil.............................................117
4.02.03 Replacing filter insert of the fuel pump.............................................................................. 117
4.02.04 Replacing filter cartridge for the fuel filter..........................................................................118
4.02.05 Changing filter cartridge for the fuel prefilter..................................................................... 119
4.02.06 Checking and cleaning dust discharge valve.................................................................... 120
4.02.07 Checking and replacing the air filter.................................................................................. 121
4.02.08 Changing safety cartridge.................................................................................................. 122
4.02.09 Checking radiator............................................................................................................... 123
4.02.10 Checking coolant level....................................................................................................... 123
4.02.11 Changing coolant............................................................................................................... 124
Table of Contents
BA RD 40 US / RD 45 US en* 00*
7
4.03 Hydraulic oil supply....................................................................................... 126
4.03.01 General............................................................................................................................... 126
4.03.02 Checking hydraulic oil level............................................................................................... 126
4.03.03 Changing hydraulic oil and ventilation filter....................................................................... 127
4.03.04 Replacing filter insert of pressure filter for hydraulic system............................................. 128
4.04 Drive................................................................................................................. 130
4.04.01 Check the drive lever......................................................................................................... 130
4.04.02 Checking the roller drum scraper...................................................................................... 130
4.04.03 Checking scraper tyre........................................................................................................ 131
4.04.04 Lubricate the scraper stop lever........................................................................................ 132
4.04.05 Checking wheel nuts / wheel bolts for tightness................................................................132
4.04.06 Checking air pressure in the tyres..................................................................................... 133
4.04.07 Wheel change.................................................................................................................... 133
4.05 Steering system.............................................................................................. 135
4.05.01 General............................................................................................................................... 135
4.05.02 Lubricating pivoted bearing................................................................................................ 135
4.05.03 Lubricating steering cylinder bolt....................................................................................... 136
4.06 Sprinkling.........................................................................................................137
4.06.01 General............................................................................................................................... 137
4.06.02 Cleaning water sprinkling unit............................................................................................ 137
4.06.03 Cleaning filter for water sprinkling......................................................................................138
4.06.04 Cleaning sprinkler nozzles................................................................................................. 138
4.07 Vibration / oscillation......................................................................................139
4.07.01 Checking damping elements..............................................................................................139
4.07.02 Changing the toothed belt for the oscillation drive............................................................ 139
5 Tables................................................................................................................... 140
5.00 Technical data................................................................................................. 141
5.00.01 Engine oil............................................................................................................................141
5.00.02 Hydraulic oil........................................................................................................................142
5.00.03 Use of biologic hydraulic oil............................................................................................... 142
5.00.04 Coolant conditioning...........................................................................................................143
5.00.05 Fuel.....................................................................................................................................143
5.00.06 Overview of lubricant details.............................................................................................. 144
5.00.07 Starting torques.................................................................................................................. 144
Table of Contents
8
BA RD 40 US / RD 45 US en* 00*
5.01 Technical data................................................................................................. 146
5.01.01 RD 40-130 US....................................................................................................................146
5.01.02 RD 40-130 O US................................................................................................................148
5.01.03 RD 40-130 C US................................................................................................................150
5.01.04 RD 45-140 US....................................................................................................................152
5.01.05 RD 45-140 O US................................................................................................................154
5.01.06 RD 45-140 C US................................................................................................................156
5.02 Dimension sheet............................................................................................. 158
5.02.01 RD 40-130 US, RD 40-130 O US......................................................................................158
5.02.02 RD 40-130 C US................................................................................................................158
5.02.03 RD 45-140 US, RD 45-140 O US......................................................................................159
5.02.04 RD 45-140 C US................................................................................................................159
5.03 Fuses................................................................................................................160
5.03.01 Main fuses.......................................................................................................................... 160
5.03.02 Battery isolating switch.......................................................................................................160
5.03.03 Fuses, steering console..................................................................................................... 160
5.03.04 Fuses, engine compartment...............................................................................................161
6 Assembly Instructions and Auxiliary Devices.................................................162
6.00 ROPS roll-over bar......................................................................................... 163
6.01 ROPS cabin..................................................................................................... 165
6.01.01 Operator's cabin overview..................................................................................................165
6.01.02 General view of instruments and operating elements....................................................... 166
6.01.03 Switch................................................................................................................................. 167
6.01.04 Sockets, lights.................................................................................................................... 169
6.01.05 Operating levers, adjustment handles............................................................................... 169
6.01.06 Heating system / Ventilation...............................................................................................169
6.01.07 Maintenance....................................................................................................................... 170
6.01.08 Technical data.................................................................................................................... 172
6.01.09 Dimension sheet.................................................................................................................174
6.01.10 Fuses.................................................................................................................................. 175
6.02 Comfort seat....................................................................................................176
6.02.01 Overview.............................................................................................................................176
6.02.02 General view of instruments and operating elements....................................................... 177
6.02.03 Switch................................................................................................................................. 178
6.02.04 Operating levers, adjustment handles............................................................................... 178
6.02.05 Operation............................................................................................................................ 180
6.02.06 Maintenance....................................................................................................................... 181
Table of Contents
BA RD 40 US / RD 45 US en* 00*
9
6.03 Injection of antifreeze for the sprinkler........................................................183
6.03.01 Overview.............................................................................................................................183
6.03.02 Operation............................................................................................................................ 183
6.04 Rotating light removable............................................................................... 185
6.04.01 Overview.............................................................................................................................185
6.04.02 General view of instruments and operating elements....................................................... 185
6.04.03 Operation............................................................................................................................ 185
6.04.04 Assembly............................................................................................................................ 186
6.04.05 Maintenance....................................................................................................................... 187
EC declaration of conformity
10
BA RD 40 US / RD 45 US en* 00*
EC DECLARATION OF CONFORMITY
Foreword
BA RD 40 US / RD 45 US en* 00*
11
1 FOREWORD
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
000-01
This instruction manual contains information and procedures for the
safe operation and maintenance of your Wacker Neuson machine. In
the interest of your own safety and to prevent accidents, you should
carefully read through the safety information, familiarize yourself with it
and observe it at all times.
This instruction manual is not a manual for extensive maintenance and
repair work. Such work should be carried out by Wacker Neuson service
or authorized specialists.
The safety of the operator was one of the most important aspects taken
into consideration when this machine was designed. Nevertheless,
improper use or incorrect maintenance can pose a risk. Please operate
and maintain your Wacker Neuson machine in accordance with the
instructions in this instruction manual. Your reward will be troublefree
operation and a high degree of availability.
Defective machine parts must be replaced immediately!
Please contact your Wacker Neuson representative if you have any
questions concerning operation or maintenance.
All rights reserved, especially reproduction and distribution rights.
Copyright 2015 Wacker Neuson Produktion GmbH & Co. KG
No part of this publication may be reproduced in any form or by any
means, electronic or mechanical, including photocopying, without the
expressed written permission of Wacker Neuson.
Any type of reproduction, distribution or storage on data media of
any type and form not authorized by Wacker Neuson represents an
infringement of copyright and will be prosecuted.
We expressly reserve the right to make technical modifications – even
without special notice – which aim at further improving our machines or
their safety standards.
Foreword
Introduction
12
BA RD 40 US / RD 45 US en* 00*
1.00 Introduction
1.00.01 Preface to the instruction manual
This chapter contains important instructions for the operating personnel
on how to operate the machine and to use this instruction manual.
This instruction manual helps you:
â– 
To become familiar with the machine.
â– 
To avoid malfunctions due to improper use.
Adhering to this instruction manual:
â– 
Helps to avoid risks.
â– 
Increases the reliability when working on the construction site.
â– 
Increases the service life.
â– 
Reduces maintenance costs and downtimes.
It is absolutely necessary to adhere to this instruction manual, the
instructions given in the safety instructions, supplementary information
and all regulations and provisions applying at the building site (e.g.
accident prevention regulations).
Maintenance and care of the diesel engine have to be performed
according to the instructions for the motor. The safety instructions must
be observed.
1.00.02 Product information
You have received a quality product. All the components of this
machinehave been carefully inspected and tested. As a result, they
comply with the quality that you expect.
The reliability of the machine is preserved through correct use and careful
maintenance. This includes the use of the specified operating supply
items and the use of original spare parts.
Our representatives will help you to keep your roller in a perfect operating
condition.
After the warranty period, our representatives will also assist you with
advice and service. They will supply you with our original spare parts
which do not only meet the technical requirements but also ensure
exchangeability and quality.
The safety, operating and maintenance instructions given in this
instruction manual are intended for the operating personnel. Thus, keep
this manual always at hand!
1.00.03 Warranty
No guarantee claims with:
â– 
Operating errors.
â– 
In the case the spare parts used are no original spare parts.
â– 
In the case wrong operating supply items have been used.
â– 
In the case any additional devices have been refitted and/or installed
that have not been approved by manufacturer.
â– 
In the case of deficient maintenance.
â– 
In the case of any processes that conflict with this instruction manual.
Foreword
Introduction
BA RD 40 US / RD 45 US en* 00*
13
1.00.04 Modifications / reservations
We are committed to provide you with correct and updated instruction
manual. However, we cannot guarantee the correctness of all data given.
To be able to keep pace with changing trends, it may be necessary to
amend or modify the product and/or how it is operated without prior
notice. We assume no liability for malfunctions, downtimes and resulting
damage.
1.00.05 Packaging and storage
We have carefully packed our products to ensure proper protection in
transit. Please check both packaging and the goods yourself for any
damage upon reception of your goods. In the case of damage, the
devices must not be put into operation. Damaged cables and connections
are a safety risk and must not be used.
In such a case, please contact your supplier.
If the devices are not put into operation upon unpacking, they must be
protected against humidity and dirt.
1.00.06 Signs and symbols
The signs and symbols used in this instruction manual are to help you
use this instruction manual and the device in a safe and fast manner.
Note Informs about application hints and useful information. No danger-
ous or harmful situation.
Enumeration Indicates a listing of issues or possibilities.
Operating steps
1.
Are listed according to their succession each starting from 1 for
each individual process.
Option Indicates special equipment which varies from the standard.
Directions Information on directions contained in these instructions such as left or
right and/or front or rear always refer to the directions of the machine
driving forwards.
Cross-references Cross-references help you to find quickly sections in this instruction
manual which supply you with additional important information. The
cross-reference shows you the page of the relevant section. The
abbreviation sqq. means "and the following pages".
Example: (see page 134 sqq.)
Positioning of illustrations The positions of illustrations are represented with letters and numbers.
The positions identified with letters in alphabetical order are only
explained in the corresponding text segment, beginning new for
each single figure. The positions marked with numbers apply to
operating elements, control units and switches. They are identical to
the numbers in the section Overview of instruments and operating
elements (see page 50 sqq.). These numbers in squared brackets
are used as a reference in the description of the elements. Amongst
others, this ensures that important and additional information can be
found immediately and without any difficulty in the descriptions of the
elements. The end of the positioning line is marked as dot or arrow. In
the illustration the dot marks a visible element and an arrow an invisible
element which is in arrow direction.
Foreword
Introduction
14
BA RD 40 US / RD 45 US en* 00*
Example
15270
501
520
A
B
Legend
[A] Driver [B] Engine compartment
Descriptive text
The drive lever [501] determines the driving direction and speed.
Using the lever [520] you can adjust the pretension of the attenuation
system to the driver's weight.
1.00.07 Signal words
A signal word identifies a source of dangers and residual risks.
DANGER
Identifies immediate danger. If this risk is not prevented, this causes
death or severe personal injuries.
001-01
WARNING
Refers to situations that may be dangerous. If this situation is not
avoided, fatality or very serious injuries may be caused.
002-01
CAUTION
Refers to situations that may be dangerous. If this situation is not
avoided, minor or light injuries may be caused.
003-01
NOTICE
Refers to a situation that may cause property damage.
004-01
Foreword
Documentation
BA RD 40 US / RD 45 US en* 00*
15
1.01 Documentation
This instruction manual is intended to make the operating personnel
familiar with basic work steps / activities of and with the machine.
The entire instruction manual consists of:
â– 
Safety instructions
â– 
Instruction manual of the machine
â– 
Instruction manual of the diesel engine
â– 
If necessary, additional information (e. g. QR code)
The entire instruction manual must always be available at the machine
and be accessible to the authorized operating personnel at all times. Prior
to operating the machine, you must have carefully read und understood
this instruction manual. In case you do not understand this instruction
manual or individual parts, please ask us prior to starting these activities.
The instruction manual includes valuable information in order to operate
the machine safely, appropriately and economically.
Foreword
Use
16
BA RD 40 US / RD 45 US en* 00*
1.02 Use
1.02.01 Intended Use
The machine represents state-of-the-art technology and complies with
all valid safety regulations concerning its intended use at the time the
machine was launched on the market.
When designing the machine it was not possible to avoid foreseeable
misuse or residual risks without restricting the machine's intended
functionality.
The maschine's intended use is:
â– 
To pave roads and traffic areas.
â– 
To ram and smooth loose earth, road bedding, pavement or similar
ramable subgrade in layers.
The machine may only be deployed on surfaces that can support it.
Not capable of bearing are e.g. high fillings, batters, roadside ditches.
The machine may not be used in explosive areas, on landfill sites and in
mining.
The machine is only intended for commercial applications within fenced
construction sites.
The machine must only be operated by authorised operating personnel
and only if in proper technical condition and in accordance with this
instruction manual.
All unintended use and/or all machine-related activities not described in
this instruction manual is to be deemed as unauthorised misuse outside
the legal limits of indemnity of the manufacturer.
Foreword
Use
BA RD 40 US / RD 45 US en* 00*
17
1.02.02 Abnormal use
Any abnormal use or any misuse of the machine will void the
manufacturer's warranty obligation, and the owner will bear the sole
responsibility in this case.
Abnormal uses shall be deemed to include:
â– 
Non-compliance with this instruction manual.
â– 
Operating errors by operating personnel not qualified or not
instructed.
â– 
Conveyance of passangers.
â– 
Leaving the driver's position during operation.
â– 
Starting, using the machine outside the driver's position.
â– 
Errors due to "reflexive behaviour" and/or "chosing the easiest way".
â– 
Operating the machine if it is not in a proper technical condition.
â– 
Using the machine with improper ambient conditions (e.g.
temperature, gradient, transverse gradient).
â– 
Using the machine with the protective equipment removed.
â– 
Spraying with high-pressure cleaners or fire extinguishing equipment.
â– 
Towing trailing loads.
â– 
Non-compliance with maintenance intervals.
â– 
Omission of measurements and tests to detect damages early.
â– 
Omission of replacing wear parts.
â– 
In the case the spare parts used are no original spare parts.
â– 
Omission of maintenance and repair works.
â– 
Improper maintenance and repair works.
â– 
Unauthorised modifications of the machine.
1.02.03 Residual risks
Residual risks have been analysed and evaluated prior to starting the
construction and planning the machine. Existing residual risks are
referred to in the documentation. However, the manufacturer cannot
foresee all situations that may pose a risk in practice.
You can avoid existing residual risks if you comply with and
implement the following instructions:
â– 
Special warnings at the machine.
â– 
General safety instructions in this instruction manual and in the safety
instructions .
â– 
Special warnings in this instruction manual.
â– 
Instructions contained in the safety instructions.
â– 
Operating instructions of the operator.
Danger of life / risk of personal injury when operating the machine
due to:
â– 
Misuse.
â– 
Improper operation.
â– 
Transport.
â– 
Missing protective equipment.
â– 
Defective and/or damaged components.
â– 
Operation / usage by personnel not trained and/or instructed.
Foreword
Use
18
BA RD 40 US / RD 45 US en* 00*
The machine may cause risk to the environment with:
â– 
Improper operation.
â– 
Operating supply items (lubricants etc.).
â– 
Noise emission.
Property damage may occur at the machine e.g. with:
â– 
Improper operation.
â– 
Non-compliance with operating and maintenance instructions.
â– 
Improper operating supply items.
Property damage may occur at further assets within the
machine's operating area e.g. with:
â– 
Improper operation.
Reduction in performance and/or the machine's functionality may
occur at the machine with:
â– 
Improper operation.
â– 
Improper maintenance and/or repair works.
â– 
Improper operating supply items.
1.02.04 Climatic conditions
Low ambient temperature The diesel engine's starting behaviour and the machine's operation
depend on:
â– 
The fuel used.
â– 
The viscosity of the motor, gear and hydraulic oil.
â– 
The battery's charge state.
Please note:
The acceleration and braking behaviour of the machine are influenced by
viscous hydraulic oil. Prior to cold seasons (autumn, winter) please adjust
all operating supply items (coolants, oils etc.) to low temperatures.
Please use fuels suitable in winter or additives improving the flow with
temperatures below 0 °C (32 °F) (see page 143 sqq.). Do not charge
batteries with temperatures below 0 °C (32 °F).
WARNING
Explosion!
Risk of injury due to burns and moving parts.
â– 
Do not use aerosol start-up aid (e.g. aether).
â– 
Do not use any liquids as start-up aid (e.g. alcohol).
002-02
Extensive ambient
temperature, extensive
height
See instruction manual of diesel engine.
Foreword
Environmental protection
BA RD 40 US / RD 45 US en* 00*
19
1.03 Environmental protection
Packing materials, cleaning agents and used or residual operating supply
items are to be disposed according to relevant environmental provisions
at the building site using the recycling systems provided.
1.04 Disposal
Conservation of nature is one of our major tasks. Properly disposed
devices avoid negative impacts on human beings and the environment
and allows re-using our precious resources.
Operating supply items Please dispose all operating supply items according to relevant
specifications and local regulations of the relevant country.
Materials (metal, plastics) To be able to dispose materials professionally, these materials need to be
correctly sorted. Cleanse materials of adhesive impurities.
Please dispose all materials as demanded by local provisions of the
relevant country.
Electical / electronic system /
battery
Electrical / electronical components are not subject to
Directive 2002/96/EC and relevant national regulations (in Germany e.g.
ElektroG).
Dispose electrical / electronic components directly at a specialised
recycling company.
Foreword
Type plate
20
BA RD 40 US / RD 45 US en* 00*
1.05 Type plate
NOTE
For machines without EC Conformity, neither an EC
Declaration of Conformity nor a CE type plate can be issued.
This is the case if, for example, the machine does not have a
drum drive, drum brake or roll-over protection.
000-45
The entire marking represents an official document and must not be
altered or effaced.
NOTE
Please state the vehicle identification number (VIN) and the
type of your machine for every spare part order.
Machine type plate The type plate is fixed to the machine frame ("Chassis / safety features").
NOTE
The VIN [E] indicates the type series and the serial number of
the machine e.g. WNCxxxxxxxxxxxxxx.
The maximum operating weight [J] is the static weight of the
machine including:
â– 
Working substances and lubricants
â– 
100 % fuel tank contents x 0.84 specific weight
â– 
100 % water & additive tank contents
â– 
75 kg for the driver
â– 
the static weight of all options or auxiliary devices at the
same time and approved by the manufacturer (e.g., chip
spreader).
No additional ballasting is allowed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379

Wacker Neuson RD45-140C US User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages