Airlink101 AIC250W User manual

SkyIPCam 250W Wireless Network Camera

Model # AIC250W

User’s Manual

Ver. 1B

2

Table of Contents

1. Introduction................................................................................................................................. 4

2. Getting Started............................................................................................................................ 5

3. Installing the Setup Wizard......................................................................................................... 6

4. Gathering Information ................................................................................................................ 8

5. Using the Setup Wizard.............................................................................................................. 9

6. Viewing Images........................................................................................................................ 16

The IP Camera is ready for use now............................................................................................. 17

7. Configuring Wireless Settings.................................................................................................. 18

7.1 Infrastructure Mode ............................................................................................................ 18

7.2 Ad-Hoc Mode ..................................................................................................................... 22

8. Web Configuration Utility........................................................................................................ 24

8.1.1 Management – System..................................................................................................... 25

8.1.2 Management – Video....................................................................................................... 26

8.1.3 Management – Wireless................................................................................................... 26

8.1.4 Management – Network................................................................................................... 27

8.1.5 Management – User......................................................................................................... 27

8.2.1 Configuration – System ................................................................................................... 28

8.2.2 Configuration – Video ..................................................................................................... 29

8.2.3 Configuration – Wireless................................................................................................. 30

WEP Encryption ................................................................................................................... 32

WPA-PSK Encryption.......................................................................................................... 33

8.2.4 Configuration – Network................................................................................................. 34

8.2.5 Configuration – User........................................................................................................ 35

8.2.6 Configuration – Date & Time.......................................................................................... 36

8.2.7 Configuration – Upload ................................................................................................... 37

8.2.8 Configuration – E-mail.................................................................................................... 38

8.3.1 Tools – FTP Server Test.................................................................................................. 39

8.3.2 Tools – E-mail Test.......................................................................................................... 39

8.3.3 Tools – Reset.................................................................................................................... 40

8.3.4 Tools – Factory Reset ...................................................................................................... 40

8.3.5 Tools – Firmware Upgrade.............................................................................................. 41

8.3.6 Tools – Backup................................................................................................................ 42

8.4.1 Help – About.................................................................................................................... 42

9. Viewing Videos from External Networks................................................................................. 43

10. IPView Pro.............................................................................................................................. 46

10.1 Installing IPView Pro........................................................................................................ 46

10.2 Starting IPView Pro.......................................................................................................... 48

10.2.1 Adding Camera using the Search Method..................................................................... 49

10.2.2 Adding Camera using the Input IP Method................................................................... 53

10.3 Using IPView Pro............................................................................................................. 55

10.3.1 Status Mode Window..................................................................................................... 56

10.3.2 View Window and View Mode Buttons........................................................................ 58

10.3.3 Control Panel ................................................................................................................. 59

10.4 System Configuration ....................................................................................................... 61

3

10.4.1 Camera Configuration.................................................................................................... 61

10.4.2 Web Configuration......................................................................................................... 62

10.4.3 Motion Configuration-1................................................................................................. 63

10.4.4 Motion Configuration-2................................................................................................. 64

10.4.5 Tools .............................................................................................................................. 65

10.4.6 Mail Configuration......................................................................................................... 66

10.4.7 Proxy Server................................................................................................................... 67

10.4.8 Recording Configuration ............................................................................................... 68

10.4.9 Schedule-Recording Configuration ............................................................................... 69

10.4.10 Others........................................................................................................................... 71

10.4.11 Log List........................................................................................................................ 72

10.4.12 Account........................................................................................................................ 73

10.4.13 About............................................................................................................................ 74

11. Xplug Control ......................................................................................................................... 75

11.1 Installing Xplug Control................................................................................................... 75

11.2 Enabling ActiveX.............................................................................................................. 76

Appendix....................................................................................................................................... 79

Sending Images via Web Browser............................................................................................ 79

Technical Support......................................................................................................................... 84

4

1. Introduction

Congratulations on your purchase of this SkyIPCam 250W. The IP Camera allows you

to view images and live videos from internal and external networks. With a built-in CPU

and Web Configuration Utility, the IP Camera is a standalone network device that

delivers high quality videos at a low cost of ownership. The built-in Web Configuration

Utility allows any computer that’s connected to the network to remotely manage the IP

Camera. Combined with the bundled Setup Wizard and IPView Pro software, managing

and viewing multiple IP Cameras is simple and efficient.

Instructions for installing and configuring this product can be found in this manual.

Before you install and use this product, please read this manual carefully for proper

operation of the product.

Package Contents

Before you begin the installation, please check the items of your package:

• SkyIPCam 250W

• Camera Stand

• AC Power Adapter

• Quick Installation Guide

• Utility CD

If any item contained is damaged or missing, please contact your local dealer

immediately. Also, keep the box and packaging materials in case you need to ship the

unit in the future.

5

2. Getting Started

Note: Before using the IP Camera, you’ll need to perform the following tasks:

1. Connect the IP Camera to your network.

2. Install the Setup Wizard.

3. Gather information about your local network address and wireless settings.

4. Configure the IP Camera using the Setup Wizard.

Please follow the steps in this Manual carefully to ensure proper setup of the IP Camera.

Caution: The IP Camera is designed for indoor use only. Direct exposure to sunlight

may cause permanent damage to the CMOS sensor. When operating in extremely

bright environment, an iris lens or sun visor is recommended to protect the IP Camera.

Step 1 Connect one end of a network cable to the IP Camera and connect the other

end to one of the LAN ports of the router or switch (See the diagram below).

Step 2 Power on the IP Camera by connecting one end of the supplied power adapter

to the power jack of the Camera and connecting the other end to an electrical outlet.

Step 3 Verify that all the lights on the Camera are lit. If not, verify that all the

connections are secure and try again.

6

3. Installing the Setup Wizard

Step 1 Insert the provided CD and wait for the autorun screen to appear.

Step 2 Click on Install Wizard.

Note: If the autorun screen does not appear automatically, go to Start, Run, type

D:\autorun.exe (where D is the letter of your CD drive) and click OK.

Step 3 Click Next.

7

Step 4 Click Yes to accept the License Agreement.

Step 5 Click Next to accept the default Destination Folder.

Step 6 Click Finish to complete the installation.

8

4. Gathering Information

Note: Before using the Setup Wizard, you’ll need to take note of your local network

address and wireless settings.

Step 1 Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for

Windows 2000/XP) and click OK. The command prompt will appear.

Step 2 At the command prompt, type ipconfig and press Enter.

Step 3 Write down the information for the IP Address, Subnet Mask, and Default

Gateway.

Step 4 Write down the following values for your wireless settings:

1. Network ID (SSID)

2. Channel Number

3. Wireless Encryption Settings

The IP Camera needs to use the same wireless settings in order for it to work properly.

You may gather these information from the web configuration utility of your wireless

router.

9

5. Using the Setup Wizard

Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard.

Step 2 Select the IP Camera you want to configure from the list and click on the Wizard

button.

10

Step 3 If the Camera’s default IP Address is on a different subnet, the following

message will appear. Click Yes to continue.

Note: If you do not receive this message, skip to Step 9.

Step 4 Enter admin for both the Admin ID and Password and click OK.

Step 5 In the IP Address field, change the first three numbers to match your local

network address.

For example: If your computer’s IP Address is 192.168.2.100, change the first three

numbers to 192.168.2 as well but leave the last number 240 alone.

11

Step 6 Enter the Subnet Mask and Gateway fields with exactly the same values as you

got from running ipconfig. Click OK to continue.

Step 7 After the Camera has restarted, click the Exit button to close the Setup Wizard.

Step 8 Start the Setup Wizard again and make sure the Current IP Address field

displays the new IP Address. Select the Camera and click on the Wizard button.

12

Step 9 The Setup Wizard appears asking you to change the Admin ID and Password.

The default Admin ID and Password is admin.

Step 10 Enter admin for both the Admin ID and Password field, click on the Change

checkboxes and enter the New ID and New Password and click Next.

13

Step 11 If you need to change the Camera’s IP Address because another network

device is already using the same address, you can assign a new address here and click

Next.

Step 12 Enter the Network Name (SSID) of your access point / wireless router in the

SSID field and select the encryption setting of your wireless network (None / WEP /

WPA-PSK) from the Security Mode drop-down menu and click Next.

Note: If you do not have wireless encryption enabled, you may skip to Step 14.

14

WEP

Step 13a Select the same Encryption Mode (64 Bit / 128 Bit), Key Format (HEX /

ASCII), Default Key (Key_1 ~ Key_4), and enter the same WEP keys (passwords) as

your wireless network in the appropriate field and click Next. Skip to Step 15.

WPA-PSK

Step 13b Select the same Key Format (HEX / ASCII) and enter the same Pre-Shared

Key (passphrase) as your wireless network and click Next. Skip to Step 15.

15

Step 14 Click Next.

Step 15 Verify that all the fields are correct and click Restart to save the settings and

reboot the Camera.

16

6. Viewing Images

Note: The following steps describe how to view images from within the same local area

network as the IP Camera. To view images from an external network such as the

Internet, please refer to Section 9 of this manual for further instructions.

Step 1 At the Setup Wizard, select the desired camera from the list and click on the

Web Config button.

Step 2 The default page appears. You can view live video by selecting either the

ActiveX Mode (Internet Explorer) or the Java Mode (Internet Explorer and Netscape).

17

Step 3 Turn the Camera’s lens clockwise or counter-clockwise to focus.

Note: ActiveX and/or Java Applet must be installed and enabled on your Web Browser

(Internet Explorer or Netscape) before you can view the live videos.

Step 4 If you need to install Java Virtual Machine on your computer, do not follow the

on-screen XP instructions. Rather, go to http://www.java.com/en/download/manual.jsp

and follow the instructions on that web site to download and install the required Java

software.

The IP Camera is ready for use now.

18

7. Configuring Wireless Settings

7.1 Infrastructure Mode

Note: The following instructions describe how to setup the IP Camera in wireless

Infrastructure mode. Use this mode if you are connecting wirelessly through a wireless

router / access point. You should use a wired connection to configure the following

wireless settings before unplugging the network cable from the IP Camera.

Step 1 At the Setup Wizard, select the desired Camera from the list and click on the

Web Config button.

Step 2 Click on System Administration to enter the Web Configuration Utility.

19

Step 3 Enter admin for both the User name and Password and click OK.

Step 4 Click on Configuration and then Wireless.

20

Step 5 If you are connecting to a wireless router, verify that the Camera is set to

Infrastructure mode.

Enter the SSID (Network Name) of your wireless router in the SSID field, or use the

Drop-down menu directly below the SSID field to choose your wireless router.

Note: You can also click on the Site Survey button to view all nearby wireless networks.

If you do not see your wireless router, click on Refresh and/or reset your wireless router.

Step 6 If you have enabled encryption on your wireless router, you will need to set the

identical encryption settings on the Camera. Enter the appropriate encryption settings.

For more information regarding how to set the encryption settings, please refer to

Section 8.2.3 Configuration – Wireless.

Step 7 Click Save to apply the new settings.

Airlink101 AIC250W, SkyIPCam 250W User manual

Related papers

Other documents