ESAB LTN 160, LTN 200 User manual

Category
Welding System
Type
User manual

This manual is also suitable for

Valid for serial no. 011--xxx--xxxx0468 290 127 041101
Aristotig 160
Aristotig 200
LTN 160, LTN 200
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 15..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ 5..........................................
ÑÒÀÍÎÂÊÀ 6.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 7..................................................
ÀÁÎÒÀ 8...........................................................
5.1 Ïàíåëü óïðàâëåíèÿ 9.......................................................
5.2 ÄÐÓÃÈÅ ÔÓÍÊÖÈÈ 11.......................................................
5.3 Ïîäæèã îòðûâîì 13.........................................................
5.4 Êîäû îøèáîê 13............................................................
6 ÎÁÑËÓÆÈÂÀÍÈÅ 14.................................................
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 14.......................................
ÑÕÅÌÀ 27..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 29.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 30........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 31...........................
bt07d2r -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ î ò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀ
ÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ðàáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
Âíèìàíèå!
Ýòî óñòðîéñòâî ïðåäíàçíà÷åíî èñê ëþ÷èòåëüíî äëÿ ýëåêòðîäóãîâîé ñâàðêè!
RU
bt07d2r -- 5 --
2 ÂÂÅÄÅÍÈÅ
Aristotig 160 (LTN 160) è Aristotig 200 (LTN 200) ïðåäñòàâëÿþò ñîáîé
âûïðÿìèòåëè, ñîçäàííûå íà áàçå èíâåðòîðíîé òåõíîëîãèè è ïðåäíàçíà÷åííûå
äëÿ ñâàðêè íåïëàâÿùèìñÿ ýëåêòðîäîì â çàùèòíûõ ãàçàõ äàëüíåéøåì ÒÈÃ),
à òàêæå ä ëÿ ñâàðêè øò ó÷íûì ýëåêòðîäîì äà ëüíåéøåì ÌÌÀ). Èíâåðòîðíàÿ
òåõíîëîãèÿ îáåñïå÷èâàåò ìà ëîå ïîòðåáëåíèå ýíåðãèè, íåáîëüøîé âåñ è
êîìïàêòíóþ êîíñòðóêöèþ.
Ñîâðåìåííàÿ ýëåêòðîíèêà ñ ìèêðîïðîöåññîðíûì óïðàâëåíèåì îáåñïå÷èâàåò,
êðîìå âñåãî ïðî÷åãî, âûñîêîå áûñòðîäåéñòâèå è ïåðâîêëàññíûå
ñâàðî÷íî-òåõíîëîãè÷åñêèå õàðàêòåðèñòèêè.
Arisotig îñíàùåí ARC PLUS, íîâîé ñèñòåìîé óïðàâëåíèÿ ïðè ñâàðêå MMA,
îáåñïå÷èâàþùåé áîëåå èíòåíñèâíóþ, áîëåå êîíöåíòðèðîâàííóþ è ìÿãêóþ
äóãó. Èñòî÷íèê áûñòðåå ðåàãèðóåò íà êîðîòêîå çàìûêàíèå êàïëè ìåòàëëà, ÷òî
çíà÷èòåëüíî ñíèæàåò ðèñê ”ïðèëèïàíèÿ¹ ýëåêòðîäà ê çàãîòîâêå.
Êðîìå òîãî, àïïàðàòû îñíàùåíû ðåã óëÿòîðîì ”Ñèëû Äóãè”, ïîçâîëÿþùèì
èçìåíÿòü äèíàìèêó âûïðÿìèòåëÿ - äåëàòü åå æåñò÷å èëè ìÿã÷å â çàâèñèìîñòè
îò òèïà ýëåêòðîäà è ïðåäïî÷òåíèé ñâàðùèêà.
Åñëè ïðè èñïîëüçîâàíèè íåðæàâåþùèõ ýëåêòðîäîâ èñïîëüçóåòñÿ òåõíèêà
ñâàðêè ”òî÷êàìè”, íà àïïàðàòå ìîæåò áûòü àêòèâèðîâàí ñîîòâåòñòâóþùèé
ðåæèì.
Aristotig 160/200 ïîñòàâëÿåòñÿ â äâóõ èñïîëíåíèÿõ: ñ öåíòðàëüíûì (åâðî-)
ðàçúåìîì äëÿ ã îðåëêè ÒÈÃ è ñ ðàçúåìîì òèïà ÎÊÑ.
 êîìïëåêò ïîñòàâêè âõîäÿò: 5-òè ìåòðîâûé ñåòåâîé êàáåëü, 5-òè ìåòðîâûé
îáðàòíûé êàáåëü ñ çàæèìîì, 1 ðàçúåì ÎÊÑ äëÿ ñâàðî÷íîãî êàáåëÿ, ã àçîâûé
øëàíã è 2 õîìóòà. àïïàðàòû ñ öåíòðàëüíûì ðàçúåìîì ïîñòàâëÿþòñÿ òàêæ å ñ
ðàìêîé äëÿ çàùèòû ðàçúåìîâ îò óäàðîâ.
Äîïîëíèòåëüíî ìîæíî çàêàçàòü ðàìêó, çàùèùàþùóþ ïàíåëü óïðàâëåíèÿ è
èìåþùóþ ðóêîÿòêè ä ëÿ íàìîòêè íà íèõ êàáåëåé Èìåþòñÿ òàêæå äâà òèïà
òåëåæåê äëÿ òðàíñïîðòèðîâêè àïïàðàòà âìåñòå ñ ãàçîâûì áàëëîíîì.
Àêñåññóàð² îò äëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 30.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ
LT N 16 0 LTN 200
Äîïóñòèìàÿ íàãðóçêà ïðè
ÏÂ 35%, ÒIG 160A/16V 200 A/18 V
ÏÂ 35%,, MMA 140A/26V 200 A/28 V
ÏÂ 60% 110A/24V 150A/26V
ÏÂ 100 % 80 A/23 V 115A/25V
Äèàïàçîí ðåã óëèðîâàíèÿ òîêà, ÒIG 3-160 A 3-200 A
Äèàïàçîí ðåã óëèðîâàíèÿ òîêà, MMA 4-140 A 4-200 A
Âðåìÿ íàðàñòàíèÿ òîêà 0-10 s 0-10 s
Âðåìÿ ñíèæåíèÿ òîêà 0-10 s 0-10 s
Âðåìÿ ïðîäóâêè ãàçà äî ñâàðêè 0-25 s 0-25 s
Âðåìÿ ïðîäóâêè ãàçà ïîñëå ñâàðêè 0-25 s 0-25 s
Âðåìÿ èìïóëüñà 0.02-5.0 s (0.001-5.0
s)
0.02-5.0 s
(0.001-5.0 s)
Âðåìÿ ïàóçû 0.02-5.0 s
(0.001-5.0 s)
0.02-5.0 s
(0.001-5.0 s)
RU
bt07d2r -- 6 --
LTN 200LT N 16 0
Íàïðÿæåíèå õîëîñòîãî õîäà 70 V 70 V
Ìîùíîñòü õîëîñòîãî õîäà 30 W 50 W
Ïîëåçíàÿ ìîùíîñòü, Ð
ïðè ìàêñ.òîêå, ÌÌÀ
4.8 kW 7.2 kW
Îòíîñèòåëüíàÿ ìîùíîñòü, S
ïðè ìàêñ.òîêå, ÌÌÀ
6.9 kVa 11 . 7 k V a
Êîýôôèöèåíò ìîùíîñòè, ïðè ìàêñ.òîêå,
ÌÌÀ
0.69 0.63
Ýôôåêòèâíîñòü, ïðè ìàêñ.òîêå, ÌÌÀ 0.75 0.78
Ïëàâêèé ïðåäîõðàíèòåëü 16 A 10 A
Ñå÷åíèå ñåòåâîãî êàáåëÿ 3x2.5 mm
2
4x1.5 mm
2
Ãàáàðèòû, ÄõØõÂ 515x285x415 515x285x415
Ìàññà 23 kg 23 kg
Êëàññ ïðèìåíåíèÿ
Ê ëàññ çàùèòû IP 23 IP 23
Ýòè ñâàðî÷íûå àïïàðàòû îòâå÷àþò òðåáîâàíèÿì, óñòàíîâëåííûì IEC 974-1.
Cå÷åíèå êàáåëÿ - â ñîîòâåòñòâèè ñî Øâåäñêèìè íîðìàìè.
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
ÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
LT N 16 0 LTN 200
Íàïðÿæåíèå ñåòè 230 V ¦ 10 %, 1-phase 400 V ¦ 10 % , 3-phase
àñòîòà 50-60 Hz 50-60 Hz
Ïëàâêèé ïðåäîõðàíèòåëü
16 A*) 10 A
Ñå÷åíèå ñåòåâîãî êà áåëÿ 3x2.5 mm
2
4x1.5 mm
2
Ñå÷åíèå ñâàðî÷íîãî êà áåëÿ
25 mm
2
25 mm
2
*)Ïðè ñâàðêå íà òîêàõ äî 100 À äîñòàòî÷íî10-àìïåðíîãî ïðåäîõðàíèòåëÿ.
RU
bt07d2r -- 7 --
Aristotig 160/200 ìîãóò êîìïåíñèðîâàòü èçìåíåíèÿ íàïðÿæåíèÿ ñåòè â
ïðåäåëàõ ±10%, ÷òî îòðàçèòñÿ ëèøü â ±0,2% èçìåíåíèè ñâàðî÷íîã î òîêà.
Äëÿ ñíèæåíèÿ ïàäåíèé íàïðÿæåíèÿ ïðè èñïîëüçîâàíèè äëèííûõ ñâàðî÷íûõ
êàáåëåé ðåêîìåíäóåò ñÿ ïðèìåíÿòü êàáåëè ñ áîëüøèì ñå÷åíèåì.
1. Óñòàíîâèòå àïïàðàò â ïîä õîäÿùåì ìåñòå è óáåäèòåñü, ÷òî äîñòóï âîçäóõà äëÿ
îõëàæäåíèÿ àïïàðàòà íå ïåðåêðûò.
2. Óáåäèòåñü, ÷òî àïïàðàò ïîäêëþ÷åí ê ïðàâèëüíîìó íàïðÿæåíèþ ñåòè. Çàçåìëèòå
ñîãëàñíî ñîîòâåòñòâóþùèì òðåáîâàíèÿì.
3. Ïîäñîåäèíèòå øëàíã çàùèòíîãî ãàçà.
4. Ïîäñîåäèíèòå ãîðåëêó ÒIG è îáðàòíûé êàáåëü.
Àïïàðàò ãîòîâ ê ðàáîòå.
4.1 Èíñòðóêöèè ïî ïîäúåìó
RU
bt07d2r -- 8 --
ÀÁÎÒÀ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
bt07d001
10
11 12 7
1. Âê ë/Âûêë. àïïàðàòà 9. Íèïïåëü äëÿ ñîåä. ãàçîâîãî øëàíãà
2. Æåëòàÿ ëàìïà (ïåðåãðóçêà) 10àçúåìãîðåëêèÒIG
3åëàÿëàìïà(ðàáîòà) 12. Ðàçúåì îáð.êàáåëÿ ïðè ñâàðêå ÒIG
4. Äèñïëåé
5. Ðåãóëÿòîð Ïðè ñâàðêå ÌÌÀ ñâàðî÷íûé è îáð.êàáåëè
î
þ
à
þ
ñ
ð
à
ç
å
à
1
1
1
2
6. Êíîïêè
ïîäêëþ÷àþòñÿ ê ðàçúåìàì 11 è 12
7. Ðàçúåì äèñò.óïðàâëåíèÿ
8èëüòð
Ïðè âêëþ÷åíèè àïïàðàòà ïåðåêëþ÷àòåëåì 1 çàãîðàåòñÿ áåëàÿ ñèãíàëüíàÿ
ëàìïà.
Àïïàðàò îáîðóäîâàí ò åðìîñòàòîì äëÿ çàùèòû îò ïåðåãðóçîê, åñëè
òåìïåðàòóðà ñòàíîâèòñÿ ñëèøêîì âûñîêîé, íàïðÿæåíèå ñâàðêè àâòîìàòè÷åñêè
îòêëþ÷àåòñÿ è çàãîðàåòñÿ æåëò àÿ ëàìïà. Ïðè ýòîì íà äèñïëåå çàãîðàåòñÿ êîä
îøèáêè ”Å13”. Ïîñëå ñíèæåíèÿ òåìïåðàòóðû äî äîïóñòèìîãî çíà÷åíèÿ
òåðìîñòàò àâòîìàòè÷åñêè âîçâðàùàåòñÿ â èñõîäíîå ïîëîæåíèå.
RU
bt07d2r -- 9 --
5.1 Ïàíåëü óïðàâëåíèÿ
Ïàíåëü óïðàâëåíèÿ ïðåäíàçíà÷åíà ä ëÿ âûáîðà ôóíêöèé è çà äàíèÿ
ïàðàìåòðîâ. Îíà ñîñòîèò è ç äèñïëåÿ (4), ðåãóëÿòîðà (5), êíîïîê (6)è
ñâåòîäèîäîâ.
Ñ ïîìîùüþ êíîïîê âû ìîæ åòå âûáèðàòü íåîáõîäèìûå ôóíêöèè. Êîãäà
ôóíêöèÿ âûáðàíà, çàãîðàåòñÿ ñîîòâåòñòâóþùèé ñâåòîäèîä.
Íà ïàíåëè èìååòñÿ 7 ëèíèé â êîòîðûõ ïðîèçâîäèòñÿ âûáîð ôóíêöèé èëè
óñòàíîâêà ïàðàìåòðîâ. Âûáðàííàÿ ëèíèÿ ïîäñâå÷èâàåòñÿ êðàñíûì
ñâåòîäèîäîì. Ïåðåìåùåíèå ìåæäó ëèíèÿìè ââåðõ èëè âíèç ïðîèçâîäèòñÿ ñ
ïîìîùüþ êðàñíûõ êíîïîê.
Ïåðåìåùåíèå â ïðåäåëàõ ëèíèè (âûáîð ôóíêöèè) îñóùåñòâëÿåòñÿ çåëåíûìè
êíîïêàìè.
Ïàðàìåòðû óñòàíàâëèâàþ òñÿ ñ ïîìîùüþ ðåãóëÿòîðà(5). Ñâåòîäèîä ñëåâà îò
ðåãóëÿòîðà îáîçíà÷àåò ðàçìåðíîñòü óñòàíàâëèâàåìîãî ïàðàìåòðà (Àìïåð
îëüò/ ñåêóíäà). Åñëè íà ëèíèè òîëüêî âûáèðàþòñÿ ôóíêöèè òî íà äèñïëåå
çàãîðàåòñÿ çíàê »---».
Îïèñàíèå ôóíêöèé:
S Ëèíèÿ 1
S Ëèíèÿ 2
S Ëèíèÿ 3
S Ëèíèÿ 4
S Ëèíèÿ 5
S Ëèíèÿ 6
S Ëèíèÿ 7
Ëèíèÿ 1 Ñâàðêà íåïëàâÿùèìñÿ ýëåêòðîäîì (TIG) èëè øòó÷íûì
ýëåêòðîäîì ÌÀ)
Åñëè âûáðàíî MMA, òî òîê óñòàíàâëèâàåòñÿ íà ýòîé ëèíèè, à
ëèíèè 2-5 íå èñïîëüçóþòñÿ.
Ëèíèÿ 2
Ñïîñîá çàæèãàíèÿ äóãè ïðè ñâàðêå ÒIG - âûñîêî÷àñòîòíûé èëè
îòðûâîì.
RU
bt07d002
bt07d2r -- 1 0 --
Ëèíèÿ 3
Òîê ñ íàëîæåíèåì èìïóëüñîâ èëè áåç íèõ OO-O
Ëèíèÿ 4 2-õ èëè 4-õ òàêòíûé ðåæèì ðàáîòû ãîðåëêè
2-õ òàêòíûé - ïðè íàæàòèè íà êíîïêó ãîðåëêè äóãà çàæèãàåò ñ ÿ, à
ïðè îòïóñêàíèè êíîï êè ãàñíåò..
2-õ òàêòíûé - ïðè íàæàòèè íà êíîïêó ãîðåëêè äóãà çàæèãàåòñÿ è
ïîñëå îòïóñêàíèÿ êí îïêè òîê ïëàâíî óâåëè÷èâàåòñÿ äî
óñòàíîâëåííîãî çíà÷åíèÿ, ïðè ïîâòîðíîì íàæàòèè êíîïêè òîê
ïëàâíî ñíèæàåòñÿ äî áàçîâîãî è ïðè îòïóñêàíèè êíîïêè äóãà
ãàñíåò.
bt07d003
Ëèíèÿ 5 Óñòàíîâêà ïàðàìåòðîâ
1. Ïðåäâàðèòåëüíàÿ ïðîäóâêà 0-25 ñåê
2. Íàðàñò àíèå òîêà 0-10 ñåê
3. Òîê èìïóëüñà èëè ïîñòîÿííûé òîê 3-160 A (3-200 A)
4. Âðåìÿ èìïóëüñà 0,02-5,0 ñåê (0.001-5.0 ñåê)
5. Áàçîâûé òîê 3-160 A (3-200 A)
6. Âðåìÿ ïàóçû 0.02-5.0 ñåê (0.001-5.0 ñåê)
7. Ñï àä òîêà 0-10ñåês
8. Ïðîäóâêà ïîñëå ñâàðêè 0-25 ñåê
Ëèíèÿ 6
Âîëüò/Àìïåðìåòð
Ïîêàçûâàåò òåêóùèå çíà÷åíèÿ ñâàðî÷íîãî òîêà èëè íàïðÿæåíèÿ
äóãè â ïðîöåññå ñâàðêè.
Ïðèáîð èìååò óäåðæèâàþùóþ ôóíêöèþ - ï îñëå îêîí÷àíèÿ
ñâàðêè ïàðàìåòðû ïðîäîëæàþò âûñâå÷èâàòüñÿ.
RU
bt07d2r -- 1 1 --
Ëèíèÿ 7.
Çàïîìèíàíèå ïàðàìåòðîâ OO1O2O1-2O A
×åòûðå ðàçëè÷íûõ íàáîðà ïàðàìåòðîâ ñâàðêè ìîãóò áûòü
ââåäåíû â ïàìÿòü àïïàðàòà - 2 äëÿ ñâàðêè ÒIG è 2 äëÿ ñâàðêè
ÌÌÀ.
Çàïîìèíàþòñÿ ñëåäóþùèå ïàðàìåòðû:
ÒIG: Âûáðàííûé ðåæèì íà ëèíèè 3 (èìïóëüñíûé èëè îáû÷íûé) è
âñå óñòàíîâêè íà ëèíèè 5.
MMA: Çíà÷åíèå ñâàðî÷íîãî òîêà
Ïåðåõîä ñ îäíîãî íàáîðà ïàðàìåòðîâ, ââåäåííûõ â ïàìÿòü, íà
äðóãîé ïðîèçâîäèòñÿ ñ ïîìîùüþ çåëåíûõ êíîïîê.
æíî òàêæå ïåðåê ëþ÷èòüñÿ ñ îäíîãî íàáîðà íà äðóãîé ñ
ïîìîùüþ êíîïêè ãîðåëêè
Äëÿ òîãî, ÷òîáû àêòèâèðîâàòü ôóíêöèþ ïåðåõîäà,
íåîáõîäèìîîäíîâðåìåííî íàæàòü îáå çåëåíûå êíîïêè.
Ïðè àêòèâàöèè ýòîé ôóíêöèè çàãîðàåòñÿ ñâåòîäèîä.
O1-2 Åñëè âûáðàí 4-õ òàêòíûé ðåæèì ðàáîòû ãîðåëêè, ïðè
áûñòðîì íàæàòèè íà êíîïêó ïðîèñõîäèò ïåðåõîä íà äðóãîé
ðåæèì ñâàðêè. Òî æå ñàìîå îòíîñèòñÿ ê 2 òàêòíîìó ðåæèìó,
åñëè ñâàðêà íå âåäåòñÿ. Â ïðîöåññå ñâàðêè â äâóõò àêòíîì
ðåæèìå íåîáõîäèìî êðàòêîâðåìåííî îòïóñòèòü êíîïêó..
Àðèñòî òèã èìååò áàòàðåþ ïîääåðæêè ïàìÿòè, òàê ÷òî äàæå ïðè
âûê ëþ÷åííîì àïïàðàòå ïàðàìåòðû ñîõðàíÿþòñÿ â íåé.
5.2 ÄÐÓÃÈÅ ÔÓÍÊÖÈÈ
Ñâàðêà òî÷êàìè (MMA)
Òåõíèêà ñâàðêè òî÷êàìè ìîæåò áûòü èñïîëüçîâàíà ïðè ñâàðêå
íåðæàâåþùèìè ýëåêòðîäàìè.
Òåõíèêà ñîñòîèò â ïåðèîäè÷åñêîì çàæèãàíèè è ãàøåíèè äóãè äëÿ ëó÷øåãî
êîíòðîëÿ íàä òåïëîâëîæåíèåì. Äëÿ ãàøåíèÿ äóãè íåîáõîäèìî ëèøü ÷óòü
ïðèïîäíÿòü ýëåêòðîä.
Óñòàíîâèòü ýò ó ôóíêöèþ ìîæíî, êîãäà âûïðÿìèòåëü íàõîäèòñÿ â ðåæèìå
óñòàíîâêè òîêà (ëèíèÿ 1, ÌÌÀ). Íàæìèòå îäíîâðåìåííî îáå çåëåíûå êíîïêè
è óäåðæèâàéòå èõ â òå÷åíèå 2-õ ñåêóíä. Íà äèñïëåå ïîÿâèòñÿ ñèìâîë
»-_-», îçíà÷àþùèé, ÷òî ôóíêöèÿ àêòèâèðîâàíà.
Ôóíêöèÿ îñòàåòñÿ àêòèâèðîâàííîé è ïîñëå âûê ëþ÷åíèÿ àïïàðàòà. Ñáðîñ
(âîçâðàùåíèå â èñõîäíûé ðåæèì) îñóùåñòâëÿåòñÿ òàêèì æå îáðàçîì è íà
äèñïëåå çàãîðèòñÿ ñèìâîë ”---”.
RU
bt07d2r -- 1 2 --
Ñèëà Äóãè (MMA)
«Ñèëà Äóãè” èçìåíÿåò äèíàìèêó âûïðÿìèòåëÿ - äåëàòü äóãó æåñò÷å èëè ìÿã÷å.
Âûïðÿìèòåëü äîëæåí íàõîäèòüñÿ â ðåæèìå óñòàíîâêè òîêà (ëèíèÿ 1, ÌÌÀ).
Íàæìèòå îäíîâðåìåííî îáå êðàñíûå êíîïêè è óäåðæèâàéòå èõ â
òå÷åíèå 2-õ ñåêóíä. Íà äèñïëåå ïîÿâÿòñÿ öèôðû îò 0 äî 100. ×åì âûøå ýò î
çíà÷åíèå, òåì æåñò÷å äóãà. (çíà÷åíèÿ èçìåíÿþòñÿ ðåã óëÿòîðîì 5).
Íàæìèòå ëþáóþ èç êíîïîê - àïïàðàò âåðíåòñÿ â îáû÷íûé ðåæèì óñòàíîâêè
ïàðàìåòðîâ, à âûáðàííîå çíà÷åíèå îñòàíåòñÿ â ïàìÿòè. Ò.ê. â ïàìÿòü
àïïàðàòà ìîæíî ââåñòè 2 íàáîðà ïàðàìåòðîâ ñâàðêè, â êàæäîì èç íèõ ìîæíî
çàïîìíèòü ñâîå çíà÷åíèå Ñèëû Äóãè.
Âðåìÿ èìïóëüñà/Âðåìÿ ïàóçû (ÒIG)
Îáû÷íûé äèàïàçîí ýòèõ ïàðàìåòðîâ ñîñòàâëÿåò 0,02 - 5,0 ñåê. Íî, íàæàâ
îäíîâðåìåííî îáå çåëåíûå êíîïêè è óäåðæèâàÿ èõ â òå÷åíèå 2-õ ñåêóíä,
ìîæíî óñòàíàâëèâàòü ä ëèòåëüíîñòü íà÷èíàÿ ñ 0,001 ñåê. Äëÿ òîãî, ÷òîáû
âåðíó òüñÿ â îáû÷íûé äèàïàçîí, íàäî åùå ðàç íàæàòü îáå çåëåíûå êíîïêè.
Ïðè óñòàíîâêå äèàïàçîíà àïïàðàò äîëæåí íàõîäèòüñÿ â ðåæèìå óñòàíîâêè
âðåìåíè èìïóëüñà/ïàóçû. Îáðàùàåì âàøå âíèìàíèå, ÷òî çíà÷åíèÿ íèæå
0,250 ñåê ïîêàçûâàþ òñÿ íà äèñïëåå áåç çàïÿòîé.
Äèñòàíöèîííîå óïðàâëåíèå
Ñ ïîìîùüþ ïóëüòîâ äèñòàíöèîííîãî óïðàâëåíèÿ ìîæíî ðåã óëèðîâàòü ñèëó
òîêà ïðè ñâàðêå ÒIG è ÌÌÀ.
Ïðè ñâàðêå ÒIG â èìïóëüñíîì ðåæèìå äèñòàíöèîííî ðåãóëèðóåòñÿ òîëüêî òîê
èìïóëüñà. Óñòàíîâëåííîå íà äèñòàíöèîííîì óïðàâëåíèè çíà÷åíèå òîêà
ïîêàçûâàåòñÿ íà äèñïëåå, åñëè àïïàðàò íàõîäèòñÿ â ðåæèìå óñòàíîâêè òîêà
îðèò ñîîòâåòñòâóþùèé ñâåòîäèîä íà ëèíèè 1 (ÌÌÀ) èëè íà ëèíèè 5 (ÒIG)).
Ïåðåõîä íà óïðàâëåíèå îò ïóëüòà ïðîèñõîäèò àâòîìàòè÷åñêè ïðè åãî
ïîäñîåäèíåíèè. Ýòî ïîäòâåðæäàåòñÿ ãîðåíèåì ñâåòîäèîäà. O A
(ÂÍÈÌÀÍÈÅ! Äëÿ àâòîìàòè÷åñêîãî ïåðåõîäà øòûðüêè L è M íà ðàçúåìå ä/ó
äîëæíû áûòü ñîåäèíåíû (çàêîðî÷åíû).
ÂÍÈÌÀÍÈÅ!
Ïðè èñïîëüçîâàíèè ïóëüòà FS002 âðåìÿ íàðàñòàíèÿ è ñíèæåíèÿ òîêà äîëæíû
áûòü âûñòàâëåíû íà 0 ñåê.
RU
bt07d2r -- 1 3 --
5.3 Ïîäæèã îòðûâîì
Ðàñïîëîæèòå ýëåêòðîä Íàæìèòå êíîïêó ãîðåëêè.
íà èçäåëèè.
Íàêëîíèòå íåìíîãî ýëåêòðîä,, Äëÿ ïðåêðàùåíèÿ
îòîðâèòå åãî îò èçäåëèÿ äëÿ âàðêè îòïóñòèòå êíîïêó
âîçáóæäåíèÿ äóãè ãîðåëêè
5.4 Êîäû îøèáîê
Aristotig 160/200 îáîðóäîâàíû âñòðîåííîé ñèñòåìîé ìîíèòîðèíãà îøèáîê
òêàçîâ). Åñëè âîçíèêàåò îøèáêà, íà äèñïëåå çàãîðàþò ñÿ ñëåäóþùèå êîäû:
E01 Îøèáêà ïàìÿòè, âíóòðåííÿÿ îïåðàòèâíàÿ ïàìÿòü
E02 Îøèáêà ïàìÿòè, âíåøíÿÿ îïåðàòèâíàÿ ïàìÿòü
E03 Îøèáêà ïàìÿòè, EPROM (ïðîãðàììèðóåìîå RAM)
E04 Îøèáêà ïàìÿòè ïðè òåñòå îïåðàòèâíîé ïàìÿòè
E05 Îøèáêà ïàìÿòè, ïåðåïîëíåíèå îïåðàòèâíîé ïàìÿòè
E06 Íèçêîå íàïðÿæåíèå áàòàðåè
E10 Íåïðàâèëüíîå ïèòàþùåå íàïðÿæåíèå 20 Â
E11 Íåïðàâèëüíîå ïèòàþùåå íàïðÿæåíèå 15 Â
E13 Ïåðåãðåâ
E14 Îøèáêà ñåðâîóñòàíîâêè òîêà
Îøèáêà ïîêàçûâàåòñÿ åñëè àïïàðàò íå ìîæåò ïîääåðæèâàòü çàäàííóþ
âåëè÷èíó òîêà, íàïðèìåð ïðè ñâàðêå ÌÌÀ íà î÷åí ü äëèííîé äóãå.
Êîä îøèáêè äîëæåí ïðîïàñòü ïîñëå ñâàðêå â òå÷åíèå íåñêîëüêèõ
ñåêóíä íà íîðìà ëüíîì ðåæèìå
Åñëè êàêîé-íèáóäü èç ýòèõ êîäîâ ïîñòîÿííî ãîðèò èëè âîçíèêàåò î÷åíü ÷àñòî,
àïïàðàò ñëåäóåò ïåðåäàòü â óïîëíîìî÷åííûé ñåðâèñíûé öåíòð.
RU
bt07d2r -- 1 4 --
6 ÎÁÑËÓÆÈÂÀÍÈÅ
Ïðèìå÷àíèå:
à àðàíìèéíú²å îáÿçàìåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
 ïðèíöèïå àïïàðàòû Aristotig 160/200 íå òðåáóþò îáñëóæèâàíèÿ. Îáû÷íî,
äîñòàòî÷íî åæåãîäíî ïðîèçâîäèòü ïðîäóâêó àïïàðàòà ñóõèì ñæàòûì âîçäóõîì
ïðè ïîíèæåííîì äàâëåíèè, à òàêæå ðåãóëÿðíî ÷èñòèòü ïûëåçàùèòíûé
ôèëüòð.
Åñëè àïïàðàò ðàáî òàåò â î÷åíü ïûëüíûõ óñëîâèÿõ, ðåêîìåíäóåò ñÿ ÷àùå
ïðîèçâîäèòü ýòè îïåðàöèè.
Ñíÿòèå ôèëüòðà.
bt07d109
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùå ííûå ôèðìîé
ESAB.
RU
ENGLISH
-- 1 5 --
TOCe
1 DIRECTIVE 16........................................................
2SAFETY 16...........................................................
3 INTRODUCTION 17...................................................
4 TECHNICAL DATA 18.................................................
5 INSTALLATION 19....................................................
5.1 Lifting instructions 19.........................................................
6 OPERATION 20.......................................................
6.1 Control panel 21.............................................................
6.2 OTHER FUNCTIONS 23......................................................
6.3 LIFTARC 24.................................................................
6.4 Error Codes 24..............................................................
7 MAINTENANCE 25....................................................
8 ORDERING SPARE PARTS 25..........................................
DIAGRAM 27............................................................
ORDERING NUMBER 29.................................................
SPARE PARTS LIST 30...................................................
ACCESSORIES 31.......................................................
-- 1 6 --
bt07d19e
1DIRECTIVE
DECLARATION OF CONFORMITY
Esab Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guaran -
tee that welding power source LTN 160/200 from serial number 628 complies with
standard EN 60974--1, in accordance with the requirements of directive (73/23/EEC)
and addendum (93/68/EEC) and with standard EN 50199 in accordance with the re-
quirements of directive (89/336/EEC) and addendum (93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Laxå 1995--09--14
2SAFETY
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide yo u with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
GB
-- 1 7 --
bt07d19e
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
3 INTRODUCTION
Aristotig 160 and Aristotig 200 are two rectifiers designed using inverter
technology and are intended for TIG -- welding and welding using coated electrodes.
The machines are also called LT N 160 and LTN 200. Inverter technology contributes
towards low power consumption, a low weight and compact dimensions.
The advanced electronics with microprocessor control provides, amongst others,
quick regulation and top class welding characteristics.
Arisotig is equipped with ARC PLUS, a new type of control that with MMA welding
provides a m ore intensive, more concentrated and smoother arc. It reacts quicker
after a short circuiting d rop transfer, which reduces the risk of the electrode sticking.
In addition, the machine is equipped with Arc Force, which means that the power
source’s dynamics can be adjusted, softer or harder depending on the type of
electrode and the welders preference.
ARC PLUS -- because of the regulator’s good characteristics it is only necessary to
change the Arc F orce settings in exceptional circumstances.
When drop welding using stainless steel electrodes a special feature on the machine
can be a ctivated to facilitat e welding.
Aristotig 160/200 is available in two designs, one with a central connector and one
with an OKC connector for a T IG torch.
Aristotig 160/200 is supplied complete witha5metremainscable,5metrereturn
cable, 1 cable coupling, gas hose and hose clips. Machines with a central connector
are also fitted with a safety bar to protect the connectors from impact.
As an accessory there is a loop handle to fit on the machines which acts as a cable
reel as well protecting the control panel. There are also two carriages available for
transportation with a gas cylinder.
ESAB’s accessories for the product can be found on page 30.
GB
-- 1 8 --
bt07d19e
4 TECHNICAL DATA
LTN 160 LTN 200
Permittedloadat
35 % duty cycle, TIG 160 A/16 V 200 A/18 V
35 % duty cycle, MMA 140 A/26 V 200 A/28 V
60 % duty cycle 110A/24V 150 A/26 V
100 % duty cycle 80 A/23 V 115A/25V
Setting range, TIG 3--160 A 3--200 A
Setting range, MMA 4--140 A 4--200 A
Slope up 0-- 10 s 0-- 10 s
Slope down 0-- 10 s 0-- 10 s
Gas pre --flow 0-- 25 s 0-- 25 s
Gas post--flow 0-- 25 s 0-- 25 s
Pulse time 0.02--5.0 s
(0.001--5.0 s)
0.02--5.0 s
(0.001--5.0 s)
Pause time 0.02--5.0 s
(0.001--5.0 s)
0.02--5.0 s
(0.001--5.0 s)
Open --circuit voltage 70 V 70 V
Open--circuit power 30 W 50 W
Useful Power, P
at max current MMA
4.8 kW 7.2 kW
Apparent Power, S
at max current MMA
6.9 kVa 11.7 kVa
Power factor, at max current MMA 0.69 0.63
Efficiency, at max current MMA 0.75 0.78
Fuse, slow rupture 16 A 10 A
Mains cable,cross section 3x2.5 mm
2
4x1.5 mm
2
Dimensions lxwxh 515x285x415 515x285x415
Weight 23 kg 23 kg
Application class
Class of enclosures IP 23 IP 23
The welding power sources comply with the requirements set out in IEC 974--1
Cable areas acc. to Swedish regulations.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
GB
-- 1 9 --
bt07d19e
5 I NSTALLATION
The installatio n must be executed b y a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
LTN 160 LTN 200
Mains voltage 230 V ¦ 10 %, 1--phase 400 V ¦ 10 % , 3--phase
Mains frequency 50--60 Hz 50--60 Hz
Fuse, slow rupture 16 A*) 10 A
Mains cable, cross section 3x2.5 mm
2
4x1.5 mm
2
Welding cable, cross section 25 mm
2
25 mm
2
*) When welding with max 100 A a 10 A slow rupture fuse is sufficient.
Aristotig 160/200 are equipped with mains voltage compensation, which means that
a ¦10 % variation in the m ains voltage only results in a ¦0,2 % variation in the
welding current.
To reduce the voltage drop when using a long cable it can be advisable to select a
heavier cable cross section.
1. Place the equipment in a suitable place and make sure the rectifier is not covered or set-up so
that cooling is prevented.
2. Make sure the machine is connected to the correct mains voltage.
Earth according to applicable directives.
3. Connect the s hielding gas.
4. Connect the TIG torch and the return cable or the MMA welding cables.
The machine is now ready for welding.
5.1 Lifting instructions
GB
-- 2 0 --
bt07d19e
6OPERATION
General safety regulations for the handling of the equipment can be found on
page 16. Read through before you start using the equipment!
bt07d001
10
11 12 7
1. Mains power switch 9. Gas nipple (connection of gas cylinder)
2. Yellow indicating lamp 10. Connection for TIG torch
3. White indicating lamp 12. Connection for return cable when TIG welding
4. Display
5. Setting knob The welding cable and return cable should be con-
t
t
6. Push--buttons
nected to 11 and 12
7. Remote control connection
8.Dustfilter
When the main power switch is switched on the white indicating lamp, on the front,
comes on.
To take your mind off the risk of overloading the machine it has been equipped with
an integrated thermostat that trips if the temperature becomes too high.
When this occurs the welding current is cut out and the yellow indicating lamp comes
on. In addition, the error code ”E13” is displayed. When the temperature has
dropped the thermostat automatically resets.
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

ESAB LTN 160, LTN 200 User manual

Category
Welding System
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages