2. Home
  3. Lighting
  4. Floodlights
  5. Halo
  6. MS34W

Halo MS34W, MS34 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Halo MS34W Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruction Manual/Instrucciones
Questions?/¿Preguntas? 1-800-334-6871 [email protected]
1
•Disassemblyofyourxturewillvoidthewarranty.
SAVE THESE INSTRUCTIONS.
FOR BEST RESULTS
•Installthemotionsensor/transmitter8-12feet
abovetheground.(Motionsensorislesssensitive
above12feet.)
•Locatemotionsensorsomotionmovesacross
detectionzone(Fig.1).
•Locatesensorawayfromheatproducingsourcesto
preventfalsetriggering.Alsobeverycarefulnotto
includeobjectssuchaswindows,whitewallsand
waterinthedetectionzone.
•Locatesensorawayfrommovingobjectssuchas
trees,largeshrubsandstreettrafc.
•Donotinstallmorethanonemotionactivated
oodlightononewallswitchorthesamecircuitsince
thismaycauseinterferencebetweenxtures.
MOUNTING AND WIRING YOUR FIXTURE
WARNING: Risk of electric shock. Disconnect
power at fuse or circuit breaker before installing
or servicing.
NOTE:Fixturecanbewalloreavemounted.
NOTE:Coverplatemountstorecessedmounted
standardjunctionboxes(Fig.2).Junctionboxmustbe
atleast1-1/2inchindepthforproperinstallationfor
recessedmountapplication.
1. Turnoffpoweratmainfuse/breakerbox.
2. Matchupscrewholesontheoodlightcoverplate
withthejunctionboxscrewholes.
3. Threadxturewiresthroughcoverplate
gasket(B)(Fig.3).
4. Connectxtureblackwiretohouseblackwire
andconnectxturewhitewiretohousewhitewire
usingwirenuts(E)provided(Fig.3).(Noground
wireisrequired.Attachanygroundwirefromyour
housetojunctionbox.)
5. Attachxture(A)tothejunctionboxwithtwo
mountingscrews(D)provided.
6. Applysiliconecaulkaroundtheedgesofthe
coverplatetoprovideawatertightsealfromrain
andmoisture.
7. Insertlampholdergaskets(C)intolampholder
assembly,tightlyagainstlampholder,andscrew
bulbsintoeachlampholder(Fig.3).(Donot
overtightenbulbs.)
PACKAGING CONTENTS/CONTENIDO DEL PAQUETE
ITEMS REQUIRED
(Purchase separately)
•Phillipsscrewdriver
•Hammer
•Outdoorweatherproofsiliconecaulking
•(2)150watt(MAX)PAR38oodlightbulbs
NOTE:Thisxturewasdesignedtoworkwithupto150wattmaximumPARhalogenood
bulbs.Forimprovedenergyefciency,lowerwattagePARhalogenoodbulbsmaybeused.
CompactFluorescent(CFL)bulbscontainelectronicswhichmayinterferewiththemotion
sensingfunctionofyourxtureandarenotrecommended.
HOW IT WORKS
Yourmotionactivatedoodlightsensesheatimagesfrom
objectssuchaspeople,largeanimalsandautomobileengines.
Whenmotionisdetected,thelightswillautomaticallyturn
on.Oncemotionhasstopped,thelightswillturnoffaftera
preselectedtimedelay.Yourmotionactivatedoodlightmay
alsobeusedasastandardoodlight.
WARNINGS AND CAUTIONS
•Readtheseinstructions.
•Keeptheseinstructions.
•Heedallwarnings.
•Followallinstructions.
•Foroutdooruseonly.
•cULusLISTEDforwetlocations.
•Connectxturetoa120volt,60Hzpowersource.Anyotherconnectionvoidsthewarranty.
•Fixtureshouldbeinstalledbypersonswithexperienceinhouseholdwiringorbyaqualied
electrician.Theelectricalsystem,andthemethodofelectricallyconnectingthexturetoit,
mustbeinaccordancewiththeNationalElectricalCodeandlocalbuildingcodes.
•Fixtureshouldbemountedtoagroundedrecessedmountedstandardjunctionboxmarked
foruseinwetlocations.
•NOTsuitableforgroundmountinstallation.
•Keepawayfromammableobjects.Donotpositionxturewithin
twoinchesofanycombustiblematerials.
•Alwaysreplacebulbwiththesamewattageorlowerwattagethanincluded.Installinga
bulbofahigherwattagecouldcreatearehazard.Useofahigherwattagebulbwillvoid
thewarranty.
•Donotallowsensorheadtotouchlighthousing–maintainatleast1inchspacebetween
xtureandsensor.
•Forproperoperationandprotectionagainstdamage,themotionsensorheadadjustment
knobsmustbefacingtheground.
•MINIMUM90°CSUPPLYCONDUCTORS.
MS34 (Black)
MS34W (White)
ENGLISH
Upto
60feet
110degrees
D. (2) #6 and (2) #8 mounting screws
(use the size that fits your junction box)
(2) Tornillos #6 y (2) tornillos #8 de montaje
(utilice el tamaño que mejor se adecue a
su caja de conexión)
Fig.1
A. Motion detector and light fixture
Detector de movimiento y
artefacto de luz
B. Coverplate gasket
Junta de la placa de cubierta
C. (2) Lampholder gaskets
(2) Juntas obturadoras
del receptáculo
E. (2) Wire nuts
(2) Tuercas para alambre
Fig.2
OctagonalRound
1-1/2inch 1-1/2inch
Fig.3
Wallmount
Eavemount
A
D
A
B
E
E
C
D
C
2
8. Turnpoweronatmainfuse/breakerbox.
9. Aimsensorheadindesiredposition.
NOTE:Maintainairspacingbetweenlampsand
sensorhead,atleast1inch.Makesuresensor
headispositionedwithcontrolswitchesfacing
towardstheground.
OPERATING YOUR FIXTURE
1. Rotatebothknobsonbottomofthesensorto“T”
(test)(Fig.4).
2. Turnonxtureatwallswitch.Allowxturetowarm
upapproximately1minutebeforetesting.(Lightwill
comeonandstayonduringwarm-upperiod.)
3. Readjustsensorheadup,down,left,orrightuntil
desireddetectionareaisachieved.
4. Turnsensitivitylightknobtodesiredlocation.Turn
knobcloserto“moonsymbol”forlighttoturnon
(withmotion)atnightorturncloserto“T”forlight
tostartdetectingmotionatdusk(Fig.5).
NOTE:Makesureyoustandmotionlesswhileyouwait
forthelightstoturnoff;otherwisethemotionsensor
willkeepthelightxtureon.
5. Oncethelightxturegoesoff,movethetime
adjustmentcontrolstothedesiredlengthoftime.
Theoodlightwillremainonafterthelastmotionis
detected(5secondsto12minutes)(Fig.6).
SELECTING YOUR DESIRED FEATURE
TROUBLESHOOTING
Mode of MODE Knob How to Set
Operation Adjustment Power Switch
Test Setting
LightsshouldturnONwith
motionbothdayandnight.
LightsshouldturnOFF
after4seconds.
Keepthepower
tothextureON.
TEST
(Bothknobsat“T”)
“Auto” Setting
(motion activated)
LightsshouldturnONwith
motiononlyatnightand
onaccordingtothetimelevel
selectedbythetime
adjustmentknob.
5seconds
to
12minutes
Keepthepower
tothextureON.
Standard Floodlight Setting
LightsshouldstayON
continuouslybothdayandnight
(mustberesetmanually).
(Anyposition) TurnpowerOFFandturn
powerONoncebywall
switchwithin2secondsto
setbacktoManual
OverrideMode.TurnOFF
for10secondstoreset
toAutoMode.
Fig.4
Fig.5
Fig.6
Problem Cause / Solution
Light Does Not
Come On With
Motion At Night
Nopowertothexture.
• Checkifcircuitbreakertripped.
• ConrmwallswitchisON.
Bulbisfaulty.
•Replacebulb.
Surroundingexternalambientlightistoobright.(Ifso,theunitmay
thinkitisdaytime.)
• Re-aimthehead.
• Relocateorrepositiontheunitawayfromthelight.
TURN OFF POWER BEFORE CONTINUING
Wiringtotheunitisloose.
• Checkwiringandreconnectifnecessaryusingwire
nuts(E)provided.
Problem Cause / Solution
Light Comes On
For No Apparent
Reason At Night
Thereismotioninthedetectionzone.
• Makesurethesensorisnotpickingupmovingobjectssuchas
trees,trafc,etc.
TEST FOR YOURSELF.
• Coverthesensorlenswithcardboardtopreventsensorfrom
detectingmotionandcoverthephotocellonthebottomofthe
sensorhead.Ifthelightstaysoff,somethinginthedetection
zoneistriggeringthesensor.
• Repositionthesensor.
*Ifthelightstaysonwiththesensorlenscovered,contact
customerservice.
Light Stays On At
Night And Does
Not Turn Off
Thereismotioninthedetectionzone.
• MakesurethesensorisnotinManualOverrideMode.
• Makesurethesensorisnotpickingupmovingobjectssuchas
trees,trafc,etc.
• Repositionthesensor.
Light
Continuously
Blinks On and
Off At Night
Thelightgivenfromtheunit’sownlampisaffectingthephoto
eyeinsensor.(Lightcouldbereectingoffofnearbysurface.)
• Re-aimthelamp.
• Repositionmotionsensor.
Light Is On
During The Day
Theswitchonthebottomofthemotionsensorisinthetest
(“T”)mode.
• Referto“OPERATINGYOURFIXTURE.”
Themotiondetectorisshadowed.
• Repositionmotionsensor.
Cannot Activate
Standard
Floodlight
Setting
(Override)
Surroundingexternalambientlightistoobright.(Ifso,theunitmay
thinkitisdaytime.)
• Re-aimthehead.
• Relocateorrepositiontheunitawayfromthelight.
Notenoughtimeisallowedtoenterthedusktodawnmode.
• TurnpowerOFF-ON-OFF-ONwithin2seconds.
2-YEAR LIMITED WARRANTY
THEFOLLOWINGWARRANTYISEXCLUSIVEANDINLIEUOFALLOTHERWARRANTIES,
WHETHEREXPRESS,IMPLIEDORSTATUTORYINCLUDING,BUTNOTLIMITEDTO,ANY
WARRANTYOFMERCHANTABILITYORFITNESSFORANYPARTICULARPURPOSE.
CooperLighting,LLC(“CooperLighting”)warrantstocustomersthat,foraperiodoftwoyears
fromthedateofpurchase,CooperLighting’sproductswillbefreefromdefectsinmaterials
andworkmanship.TheobligationofCooperLightingunderthiswarrantyisexpresslylimited
totheprovisionofreplacementproducts.Thiswarrantyisextendedonlytotheoriginal
purchaseroftheproduct.Apurchaser’sreceiptorotherproofofdateoforiginalpurchase
acceptabletoCooperLighting.Thisisrequiredbeforewarrantyperformanceshallberendered.
ThiswarrantydoesnotapplytoCooperLightingproductsthathavebeenalteredorrepaired
orthathavebeensubjectedtoneglect,abuse,misuseoraccident(includingshippingdamages).
ThiswarrantydoesnotapplytoproductsnotmanufacturedbyCooperLightingwhichhavebeen
supplied,installed,and/orusedinconjunctionwithCooperLightingproducts.Damagetothe
productcausedbyreplacementbulbsorcorrosionordiscolorationofbrasscomponentsare
notcoveredbythiswarranty.
LIMITATIONOFLIABILITY:
INNOEVENTSHALLCOOPERLIGHTINGBELIABLEFORSPECIAL,INDIRECT,INCIDENTAL,OR
CONSEQUENTIALDAMAGES(REGARDLESSOFTHEFORMOFACTION,WHETHERINCONTRACT,
STRICTLIABILITY,ORINTORTINCLUDINGNEGLIGENCE),NORFORLOSTPROFITS;NORSHALL
THELIABILITYOFCOOPERLIGHTINGFORANYCLAIMSORDAMAGEARISINGOUTOFOR
CONNECTEDWITHTHESETERMSORTHEMANUFACTURE,SALE,DELIVERY,USE,MAINTENANCE,
REPAIRORMODIFICATIONOFCOOPERLIGHTINGPRODUCTS,ORSUPPLYOFANYREPLACEMENT
PARTSTHEREFORE,EXCEEDTHEPURCHASEPRICEOFCOOPERLIGHTINGPRODUCTSGIVINGRISE
TOACLAIM.NOLABORCHARGESWILLBEACCEPTEDTOREMOVEORINSTALLFIXTURES.
Toobtainwarrantyservice,pleasecontactCooperLighting,LLC,at1-800-334-6871,press
option2forCustomerService,orviae-mail[email protected]and
includethefollowinginformation:
•Name,addressandtelephonenumber
•Dateandplaceofpurchase
•Catalogandquantitypurchase
•Detaileddescriptionofproblem
AllreturnedproductsmustbeaccompaniedbyaReturnGoodsAuthorizationNumberissued
bytheCompanyandmustbereturnedfreightprepaid.AnyproductreceivedwithoutaReturn
GoodsAuthorizationNumberfromtheCompanywillberefused.
CooperLighting,LLCisnotresponsibleformerchandisedamagedintransit.Repairedor
replacedproductsshallbesubjecttothetermsofthiswarrantyandareinspectedwhen
packed.Evidentorconcealeddamagethatismadeintransitshouldbereportedatonceto
thecarriermakingthedeliveryandaclaimledwiththem.
ReproductionsofthisdocumentwithoutpriorwrittenapprovalofCooperLighting,LLCarestrictlyprohibited.
For assistance, call 1-800-334-6871 or e-mail us at [email protected]
PrintedinChina
/