Quick start guide
for model LS5105
Battery installation
Install the battery as shown below.
Press the tab and
slide the battery
compartment cover
downwards.
1. Insert the plug as
indicated. Make sure
it is plugged securely
and matches the color-
coded label inside the
battery compartment.
2.
Place the battery
with the label THIS
SIDE UP facing
up and the wires
inside the battery
compartment.
3.
Align the cover at
against the battery
compartment, then
slide it upwards until it
clicks into place.
4.
Power
adapter
Battery charging
For optimal performance, charge the handset
battery for at least 16 hours before use.
Registering a handset
To register a new handset:
1. Place the unregistered
handset in the telephone
base.
2. Press the MENU softkey on
the telephone base while in
idle mode.
3. Press the UP and DOWN
Navkeys to highlight Register
Handset, then press the
SELECT softkey.
Registering Handset will
appear on the telephone
base display.
Registration in progress...
will appear on the handset
display.
The registration process
may take up to 90 seconds
to complete.
When the registration process is complete, the
telephone base and handset will generate a
conrmation tone. The newly registered handset
will be assigned the next handset registration
number.
•
•
•
12:00AM
Registration
in progress...
12:00AM
Place in
Charger
12:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the Main
Menu. Press SELECT.
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
Charger
Electrical outlet
not controlled by
a wall switch
Charge light
NOTE:
Use only the power adapter and battery supplied
with your VTech telephone.
NOTE:
For complete feature instructions, please refer
to your user’s manual.
IMPORTANT!
If your product is not working properly:
Refer to the Troubleshooting section of the
user’s manual.
Visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.
vtechcanada.com or 1 (800) 267-7377.
•
•
96-006551-020-100
issue 1