VTech LS5105 - Cordless Extension Handset Quick start guide

Brand: VTech

Model: LS5105 - Cordless Extension Handset

Type: Quick start guide

Quick start guide for model LS5105

Battery installation

Install the battery as shown below.

Press the tab and slide

the battery compartment

cover downwards.

Insert the plug as indicated.

Make sure it is plugged

securely and matches the

color-coded label inside the

battery compartment.

Place the battery with

the label THIS SIDE

UP facing up and the

wires inside the battery

compartment.

3. Align the cover at against

the battery compartment,

then slide it upwards until

it clicks into place.

Charger

Electrical outlet

not controlled by

a wall switch

Power

adapter

Charge light

Battery charging

For optimal performance, charge the handset battery for at least 16

hours before use.

Registering a handset

To register a new handset:

1. Place the unregistered handset in the

telephone base.

2. Press the MENU softkey on the telephone

base while in idle mode.

3. Press the UP and DOWN Navkeys to

highlight Register Handset, then press the

SELECT softkey.

Registering Handset will appear on the

telephone base display.

Registration in progress... will appear on

the handset display.

The registration process may take up to

90 seconds to complete.

When the registration process is complete, the

telephone base and handset will generate a

conrmation tone. The newly registered handset will

be assigned the next handset registration number.

•

12:00AM

Registration

in progress...

12:00AM

Place in

Charger

12:00AM

Press MENU in the

base. Find 'Register

Handset' in the Main

Menu. Press SELECT.

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-MH

WARNING: DO NOT BURN OR PUNCTURE BATTERIES

MADE IN CHINA

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-MH

WARNING: DO NOT BURN OR PUNCTURE BATTERIES

MADE IN CHINA

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-MH

WARNING: DO NOT BURN OR PUNCTURE BATTERIES

MADE IN CHINA

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-MH

WARNING: DO NOT BURN OR PUNCTURE BATTERIES

MADE IN CHINA

NOTE:

Use only the power adapter and battery supplied with your VTech

telephone.

Replacing a handset

When you are replacing rather than adding a

handset, you need to delete all the handset

registrations from the telephone base for the

handsets to be numbered sequentially.

To delete registration on all handsets:

Press the MENU softkey on the telephone

base when in idle mode to enter the main

menu.

Press the UP and DOWN NavKeys to select

Settings, then press the SELECT softkey to

enter the Settings menu.

Press the UP and DOWN NavKeys to

highlight Delete Handsets, then press the

SELECT softkey. The screen will show

Delete Registration of all handsets?

Press the YES softkey.

After deleting the registrations of all handsets,

you will need to register each handset individually

with the telephone base.

Settings

Voice Mail Codes

Default Settings

Delete Handsets

SELECT

Delete Handsets

YES

Delete Registration

of all handsets?

NOTE:

For complete feature instructions, please refer to your user’s

manual.

IMPORTANT!

If your product is not working properly:

Refer to the Troubleshooting section of the user’s manual.

Visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com

or 1 (800) 267-7377.

•

96-006551-010-100

issue 0

VTech LS5105 - Cordless Extension Handset Quick start guide

VTech LS5105 - Cordless Extension Handset Quick start guide

VTech LS5105 - Cordless Extension Handset Quick start guide

Related papers

Other documents