Cembre MARKINGenius MG2 Operating instructions

Cembre
Brand
Cembre
Model
MARKINGenius MG2
Category
Networking
Type
Operating instructions

Cembre MARKINGenius MG2 is a high-tech portable inkjet printer designed for industrial marking applications. It offers a wide range of features, including the ability to print text, logos, and barcodes on a variety of materials, including metal, plastic, and glass. The MG2 is also capable of printing on uneven surfaces and can be used for a variety of applications, including product identification, date coding, and traceability. With its compact size and lightweight design, the MG2 is easy to transport and can be used in a variety of work environments.

Cembre MARKINGenius MG2 is a high-tech portable inkjet printer designed for industrial marking applications. It offers a wide range of features, including the ability to print text, logos, and barcodes on a variety of materials, including metal, plastic, and glass. The MG2 is also capable of printing on uneven surfaces and can be used for a variety of applications, including product identification, date coding, and traceability. With its compact size and lightweight design, the MG2 is easy to transport and can be used in a variety of work environments.

2
230V 50Hz
115V 60Hz
1
Click
Add Printer
and follow the Wizard.
Click Next
Select
Local printer attached
to this computer
Deselect Automatically
detect and install my
Plug and Play printer
Click Next
On the Windows applications bar, click Start then select
Printers and Faxes
Alternatively click Start, select Control Panel then double click
Printers and Faxes
Click Have Disk
Click Browse
Select Use the following port
Select latest USB port in the drop-down
From My Computer select the location:
System (C:)\
Program fil e s\
Cembre\
GENIUSPRO\
Driver\
Genius II\
2000-XP-Vista-7\
Select the file
Genius II.inf
Click Open
The location of the driver
file is shown in the lower
field, click OK
In Printers window select
Genius II
Click Next
Confirm by clicking NEXT
Insert Name and Organization in appropriate range.
Click NEXT
The following window shows the path of the software installa-
tion. To continue, click NEXT
Waiting for GENIUSPRO
®
installation
Click CLOSE to exit
cont.
Insert the CD
into the computer.
The installation
procedure will autostart
within seconds.
On “Ready to Install” GENIUSPRO
®
window, click INSTALL
The setup checks for the presence of additional components
including Microsoft .Net Framework 4; if necessary confirm
the components installation.
When installation is completed
GENIUSPRO
®
icon will appear on the desktop
REMOVE THE CD
Connect the USB cable between MG2 and the computer.
Connect MG2 to mains power and switch on at the back of the
printer.
Windows XP will indicate that it has found new hardware.
D
o
n
o
t
c
o
n
n
e
c
t
t
h
e
p
r
i
n
t
e
r
Y
e
t
Click Next
2 43
English
+
+
12 I 100 E
1
2
3
4
Printer
GENIUSPRO
®
software
on CD
USB cableMains power cable
mg2
installation on Windows
®
XP (SP3)
Read the Installation and Maintenance Manual
before commencing this procedure
SYSTEM REQUIREMENTS
•
Processor Pentium
®
4 (2,4 GHz), equivalent
or above (recommend Pentium
®
Dual-Core inside
TM
)
•
1 Gb RAM
•
USB Connection
•
2 Gb available hard disk space
•
Microsoft
©
.Net Framework 4
• Video resolution 1024x768 (recommend 1280x1024)
•
CD drive
•
Windows
®
: XP (SP3) or later
•
Facility to receive software updates by connecting
directly to Cembre website or via network or via
portable memory device
To ensure a correct installation of MG2
proceed carefully as follows:
Install the software
Install the printer driver
Configure the USB connection
Configure GENIUSPRO
®
software
Cembre S.p.A.
Tel: +39 030 36921
info@cembre.com
Cembre Ltd.
Tel: 01675 470440
[email protected].uk
Cembre Inc.
Tel: (732) 225-7415
Sales.US@cembreinc.com
www.cembre.com
cont.
From
Start - Printers and Fax
Right click
Genius II printer icon
Select General
Select Print Test Page
Click OK
If MG2 fails to function, repeat the process of changing USB
ports and test printing until MG2 functions correctly.
ATTENTION: always connect MG2 to the same physical USB
port on the computer, otherwise it will be necessary to recon-
figure the connection each time a different port is used.
If the selected USB port is configured correctly, the MG2 car-
riage will move out, in and out again, then start to alarm.
Cancel the alarm by pushing the red button.
Click OK then close the Printers and Faxes window
If the selected USB port is not correctly configured, the printer
will not function and Windows will indicate a printing error:
In this case select Ports
Select a different USB port
in the drop-down
Click Apply
Select
Properties
in the
drop-down
In General select
Print Test Page
GENIUSUITE
Double click on
GENIUSPRO
®
icon on the desktop, a Loa-
ding window will appear until the Start window indica-
tes the program is ready.
In Start window, click
Settings
, then
Printers
In Printer Configuration
window,
click Add Printer and
select GeniusII
from the list
Select
Advanced
In Plate
drop-down
select Plate 1
Click OK on 3
open windows to
return to System
Default Settings
Now read the User Manual to calibrate MG2
and commence working.
GENIUSPRO
®
The configuration is finished.
Now you can print with GeniusII.
If, when printing, GeniusII rejects the configurations,
configure templates thus.
TEMPLATE CONFIGURATION – Select GeniusII printer and
click one of the four printing configurations (here FLAT).
Click OK for all the open windows to confirm the new settings.
Return to Printer Configuration window.
Repeat the operation for the other printing configurations by
setting:
MG-CPM plate 2
MG-TPM plate 3
MG-TDM/TDMO plate 4
EDIT OFFSET – System default print position values.
Normally these values are set to 0 and do not require
adjustment. Please refer to the user manual for individual
media print position fine tuning.
Click OK to save and EXIT
Click on
Preferences
Printer name defaults to Genius II, overwrite this if required
In Do you want to use this printer as the default printer?
Select No
Click Next
Select Do not share this printer
In Do you want to
print a test page?
Select No
Click Next
Click Finish
To complete the
installation click
Continue Anyway
The Genius II printer icon will appear in the Printer and faxes
folder
Click Next
  • Page 1 1
  • Page 2 2

Cembre MARKINGenius MG2 Operating instructions

Cembre
Brand
Cembre
Model
MARKINGenius MG2
Category
Networking
Type
Operating instructions

Cembre MARKINGenius MG2 is a high-tech portable inkjet printer designed for industrial marking applications. It offers a wide range of features, including the ability to print text, logos, and barcodes on a variety of materials, including metal, plastic, and glass. The MG2 is also capable of printing on uneven surfaces and can be used for a variety of applications, including product identification, date coding, and traceability. With its compact size and lightweight design, the MG2 is easy to transport and can be used in a variety of work environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents