Apple v10.5 Quick start guide

Brand: Apple

Model: v10.5

Category: Software

Type: Quick start guide

Apple v10.5 provides the user with a variety of different features and potential use cases. For instance, the device enables the installation and usage of Windows on an Intel based Mac computer. It comes with a built-in optical disc drive, or allows to connect a compatible external optical drive, that is necessary to run the Windows installation. Furthermore, at least 10 GB of free space on the disk that is going to be used for the installation are required.

Boot Camp

Installation &

Setup Guide

Contents

3 Boot Camp

Introduction

What You Need

If You’ve Already Used a Beta Version of Boot Camp

Upgrading Windows XP to Windows Vista

Installation Overview

6 Step 1:

Run Boot Camp Assistant

Creating a Partition for Windows

8 Step 2:

Install Windows

Selecting the Windows Partition

Formatting the Windows Partition

Setting Up Windows

12 Step 3:

Install the Boot Camp Drivers for Windows

Starting Up Using Mac OS X or Windows

Setting the Default Operating System

Selecting an Operating System During Startup

Using Windows on Your Mac

Using an Apple Keyboard with Windows

Using the Function Keys on an Apple Keyboard

Right-Clicking

Scrolling with a Trackpad

Using an Apple Remote

Using Bluetooth Devices with Windows

Ejecting Discs

Setting Your Computer to Restart Automatically After a Power Failure

Using Third-Party Utilities

Removing Windows from Your Computer

Troubleshooting

Learning More, Support, and Feedback

Boot Camp

Run Microsoft Windows on an Intel-based Mac computer.

Introduction

Boot Camp enables you to install Windows on your Intel-based Mac computer, using a

Microsoft Windows install disc that you provide. Windows is installed on its own

partition. After installation, you can use either Windows or Mac OS X on your Mac

computer.

The Boot Camp Assistant application helps you create the Windows partition and

restart your Mac using your Windows installation disc. Then you can follow these

instructions to install Windows and install software drivers that enable Windows to

work with your Mac hardware.

Important:

Before you use Boot Camp Assistant, print this document. It contains

information you’ll need while installing Windows.

NOTICE:

Make sure to back up all of your data before using Boot Camp, and regularly

back up data while using the software.

What You Need

Here’s what you need to install and set up Windows on your Mac:

An Intel-based Mac computer, with:

a USB keyboard and mouse, or a built-in keyboard and trackpad

Mac OS X version 10.5 or later (the latest version of Mac OS X is strongly

recommended)

a built-in optical disc drive, or, if your computer doesn’t have a built-in optical

drive, a compatible external optical drive

For information on using your computer with an external optical drive, see the

documentation that came with your computer.

all firmware updates for your computer

For information about updating your computer’s system software and firmware, see

page 21.

A Mac OS X Leopard installation disc, which can be either of the following:

a Mac OS X Leopard disc (included with all purchased copies of Leopard)

a Mac OS X Install Disc 1 (included with all Macs that have Leopard preinstalled)

At least 10 GB of free space on the disk you’re installing on

Boot Camp Assistant (located in /Applications/Utilities/)

Windows XP Home Edition or Professional with Service Pack 2 or later, or Windows

Vista Home Basic, Home Premium, Business, or Ultimate

Important:

You must use a single full-install Windows installation disc (Service Pack 2 is

required for Windows XP installations). Do not use an upgrade version of Windows and

do not install an earlier version of Windows XP and attempt to update it later to SP2 or

later. Use only 32-bit versions of Windows. If you have a Mac Pro or a MacBook Pro

introduced in early 2008 or later, you can use a 64-bit version of Windows Vista.

If You’ve Already Used a Beta Version of Boot Camp

If this is your first time using Boot Camp, skip this section and go to “Installation

Overview” on page 5.

If you’ve already installed Boot Camp Beta on your computer and used it to create a

Windows partition and install Windows, you don’t need to repartition your hard disk or

reinstall Windows. Follow the instructions below to install new and updated Mac

drivers for Windows.

Important:

If you’ve customized your Windows environment, write down your settings

before updating the drivers.

To install new and updated Mac drivers for Windows:

Restart your Mac using Windows.

Insert your Mac OS X Leopard installation disc.

If the installer doesn’t start automatically, browse the disc using Windows Explorer and

double-click the setup.exe file in the Boot Camp directory.

Click Repair.

Note:

If you use MediaFour’s MacDrive application, you may not see the Boot Camp

directory. To see it, right-click the CD drive in Windows Explorer and choose

MacDrive > Show Windows Files.

Upgrading Windows XP to Windows Vista

You can upgrade Windows XP to Windows Vista using a licensed copy of Windows Vista

Home Basic, Home Premium, Business, or Ultimate. After upgrading to Windows Vista,

you must reinstall the Boot Camp drivers.

To upgrade Windows XP to Windows Vista:

Restart your Mac using Windows.

Insert your Windows Vista installation or upgrade disc.

Follow the instructions that came with Windows Vista.

After completing the Windows Vista upgrade, insert your Mac OS X Leopard installation

disc.

If the installer doesn’t start automatically, browse the disc using Windows Explorer and

double-click the setup.exe file in the Boot Camp directory.

Installation Overview

Installing Windows on your Mac computer involves the following steps:

Step 1: Run Boot Camp Assistant.

Boot Camp Assistant helps you with these tasks:

Creating a partition for Windows

Boot Camp Assistant creates a partition for Windows on your computer’s startup or

other internal disk.

Starting the Windows installation

Boot Camp Assistant gets you started with the Windows installation.

Step 2: Install Windows.

Step 3: Install the Boot Camp drivers on your Windows volume.

Important:

Before you begin, make sure you have a backup of the important

information on your computer.

Step 1:

Run Boot Camp Assistant

Boot Camp Assistant helps you create a new partition for Windows and gets you

started with the Windows installation.

Important:

If you are using a portable computer, connect the power adapter before

continuing.

To use Boot Camp Assistant:

log out any other users on your computer.

Open Boot Camp Assistant (located in /Applications/Utilities/) and follow the onscreen

instructions.

Refer to the following sections for more information.

Creating a Partition for Windows

Boot Camp Assistant helps you create a new partition for Windows on an internal disk.

The assistant dynamically partitions your startup disk, creating a new partition for

Windows without erasing your existing Mac OS X system. If you have a computer with

multiple internal disks, you can create a second partition on any of those disks or use

an entire disk for Windows. See “Creating a Partition on a Computer with Multiple

Internal Disks” on page 7.

When you create the Windows partition, you can choose to use 32 GB, use half of the

disk for Windows, or set a custom size. The Windows partition must be at least 5 GB

and leave at least 5 GB of free space on the Mac OS X partition.

To create a partition for Windows:

Set the size of your Windows partition.

Refer to your Windows installer documentation to help you determine the best

partition size for your system. Windows Vista requires more disk space than

Windows XP.

Note:

A partition larger than 32 GB cannot be formatted as a FAT volume. See

“Formatting the Windows Partition” on page 10.

Click Partition.

Boot Camp Assistant creates the new Windows partition. Your original Mac OS

partition, with all your software and information, remains intact.

You can use Boot Camp Assistant later to remove the partition if you want to restore

the disk to a single-partition Mac OS X volume (see page 20).

Creating a Partition on a Computer with Multiple Internal Disks

If you are installing Windows on a computer with more than one internal disk, select

which disk to partition for Windows. You can:

create a second partition for Windows on any internal disk

erase a non-startup disk and create a single partition for Windows

If you have already partitioned a disk, you can restore it to a single Mac OS X partition.

In the “Create or Remove a Windows Partition” window, select a disk to see the options

available for that disk.

Step 2:

Install Windows

Read and follow these instructions for installing Windows on your Mac computer. Refer

to your Windows documentation for general information about installing and setting

up Windows.

Important:

Unless you’re using a portable computer, you’ll need a USB keyboard and

mouse during installation.

Important:

If your computer doesn’t have a built-in optical disc drive, you must install

Windows and Windows drivers using a compatible external optical drive.

You can install any of the following versions of Windows:

Windows XP Home Edition or Professional

Windows Vista Home Basic, Home Premium, Business, or Ultimate

Important:

You must use a single full-install Windows installation disc (Service Pack 2

or later is required for Windows XP installations). Do not install an earlier version of

Windows XP and attempt to update it later to SP2.

To install Windows on your Mac computer:

If you already quit Boot Camp Assistant without installing Windows:

Open Boot Camp Assistant.

Select “Start the Windows installer.”

Click Continue.

If you are using a computer with more than one internal disk, select the disk on which

you want to install Windows, and then click Continue.

Insert your Windows installation disc.

In Boot Camp Assistant, click Start Installation.

Your computer starts up from the Windows installation disc. Follow the onscreen

instructions. Refer to the following sections for more information.

Selecting the Windows Partition

It is very important to select the correct partition when installing Windows so that you

don’t overwrite Mac OS X on your computer.

To select the correct partition for Windows XP:

Select “C: Partition3 <BOOTCAMP> [FAT32].”

To select the correct partition for Windows Vista:

Select “Disk 0 Partition 3 BOOTCAMP.”

NOTICE:

Do not create or delete a partition, or select any partition other than as

noted below. Doing so may delete the entire contents of your Mac OS X partition.

Formatting the Windows Partition

Even though Boot Camp pre-formats the Windows partition, this partition can’t be

used to boot the computer. You must reformat the new Windows partition using the

Windows installer.

To format the partition for Windows XP:

Select an NTFS or FAT format:

NTFS—Provides better reliability and security, but you will not be able to save files to

the Windows volume from Mac OS X.

Â FAT—Provides better compatibility, allowing you to read and write files on the

Windows volume from Mac OS X. This option is available only if the Windows

partition you created in Step 2 is 32 GB or smaller.

Important: Do not select “Leave the current file system intact.” To successfully install

Windows XP, you must select one of the other options.

To format the partition for Windows Vista:

1 Click “Drive options (advanced).”

2 Click Format, and then click OK.

3 Click Next.

The Windows Vista partition is formatted using the NTFS file system.

Setting Up Windows

After you install the Windows software, your computer automatically restarts using

Windows. Use the Windows setup screens to configure Windows.

Step 3: Install the Boot Camp Drivers for Windows

After installing Windows, install Mac-specific drivers and other software for

Windows using your Mac OS X Leopard installation disc.

The Mac OS X disc installs drivers to support Mac components, such as:

Â graphics

Â networking

Â audio

Â AirPort wireless connectivity

Â Bluetooth®

Â Built-in iSight camera (external iSight cameras aren’t supported)

Â Apple keyboards

Â Apple Remote

Â brightness control for built-in displays

The Mac OS X disc also installs the Boot Camp control panel for Windows and the

Apple Boot Camp system tray item.

To install the Boot Camp drivers:

1 Eject the Windows installation disc.

a Go to My Computer.

b Select the optical drive (D:).

c Click “Eject this disk” in the System Tasks list.

2 Insert the Mac OS X disc.

If the installer doesn’t start automatically, browse the disc using Windows Explorer and

double-click the setup.exe file in the Boot Camp directory.

3 Follow the onscreen instructions.

If a message appears that says the software you are installing has not passed Windows

Logo testing, click Continue Anyway.

Windows that appear only briefly during the installation don’t require your input.

If nothing appears to be happening, there may be a hidden window that you must

respond to. Check the taskbar and look behind open windows.

Important: Do not click the Cancel button in any of the installer dialogs.

4 After your computer restarts, follow the instructions in the Found New Hardware

Wizard to update your software drivers (Windows XP only).

5 Follow the instructions for any other wizards that appear.

Note: Periodically, Apple may provide updated Boot Camp drivers, which you can

download and install using Apple Software Update. To check for updated drivers

manually, go to www.apple.com/support/bootcamp.

Starting Up Using Mac OS X or Windows

Once you’ve installed Windows and the Boot Camp drivers, you can start using

Windows on your Mac. Boot Camp makes it easy to start up your computer using either

Mac OS X or Windows. You can set the default operating system for your computer

using Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows).

You can also select an operating system as your computer is starting up.

Setting the Default Operating System

You can use the Startup Disk pane of System Preferences in Mac OS X to set the default

operating system for starting up your computer. Boot Camp also installs a Boot Camp

control panel that lets you set the default operating system when you’re running

Windows.

To set the default operating system in Mac OS X:

1 In Mac OS X, choose Apple () > System Preferences.

2 Click Startup Disk.

3 Select the startup disk with the operating system you want to use by default.

4 If you want to start up that operating system now, click Restart.

To set the default operating system in Windows:

1 In Windows, click the Boot Camp system tray item and choose Boot Camp Control

Panel.

Note: Your screen may look different, depending on which computer you’re using.

2 Select the startup disk with the operating system you want to use by default.

3 If you want to start up that operating system now, click Restart.

To restart in Mac OS X using the Boot Camp system tray item:

m In Windows, choose “Restart in Mac OS X” from the Boot Camp system tray item.

Restarting in Mac OS X using the Boot Camp system tray item also sets the default

operating system to Mac OS X.

Selecting an Operating System During Startup

You can select which operating system to use during startup by holding down the

Option key. This displays icons for all available startup disks, and lets you override the

default setting for the startup disk in Startup Disk preferences (Mac OS X) or the Boot

Camp control panel (Windows) without changing that setting.

To select an operating system during startup:

1 Restart your computer and hold down the Option key until disk icons appear onscreen.

2 Select the startup disk with the operating system you want to use, and then click the

arrow beneath the icon.

Using Windows on Your Mac

The following sections provide information about running Windows on a Macintosh

computer. If you’re not already familiar with how to use Windows, refer to the

documentation that came with your Windows software.

Using an Apple Keyboard with Windows

Boot Camp sets the keys on your Apple keyboard to emulate a standard PC keyboard.

This enables Control-Alt-Delete, Print Screen, and other common key commands to

work with Windows.

The following table tells you how to type PC key commands on an external Apple

Keyboard, Apple Wireless Keyboard, and Mac portable computer built-in keyboards. For

details, see: docs.info.apple.com/article.html?artnum=304270

PC key command Apple Keyboard

Portable Mac built-in keyboard/

Apple Wireless Keyboard

Control-Alt-Delete Control-Option-Delete ;

Control-Option-Delete

Alt Option Option

AltGr Control-Option Control-Option

Backspace Delete Delete

Delete Delete ;

Fn-Delete

Enter Return Return

Enter (numeric keypad) Enter Enter

(with some built-in keyboards only)

Insert Fn-Enter or Help Fn-Enter

Num lock Clear Fn-F6

(with some built-in keyboards only)

Pause/Break F16 Fn-Esc

Print Screen F14 Fn-Shift-F11

Print active window Option-F14 Fn-Shift-Option-F11

Scroll/Lock F15 Fn-F12

Windows Command (x) Command (x)

Use the Delete key above the navigation keys.

Some Mac portable computers have a group of keys with small numbers on them that can be used as a numeric

keypad. To use these keys as a keypad, press the F6 key to engage Num Lock, or hold down the Fn key while you

press the keys in the keypad.

Using the Function Keys on an Apple Keyboard

Pressing function keys (F1–F12) on Mac portable built-in keyboards and on newer

external Apple keyboards controls hardware features, such as volume, display

brightness, and, on some keyboards, media playback.

By holding down the Fn key as you press function keys, you can also use them to

trigger application-specific software features. For example, if you open iTunes and press

Fn-F1, iTunes Help opens.

You can set the keyboard so that the function keys control application-specific features

without pressing Fn. You then hold down Fn to use the function keys to control

hardware features.

To set whether the function keys control hardware or software features:

1 In Windows, click the Boot Camp system tray item and choose Boot Camp Control

Panel.

2 Click the Keyboard tab.

3 Select or deselect “Use the F1–F12 keys to control software features.”

Right-Clicking

You can right-click when running Windows on your Mac using an Apple Mighty Mouse.

If you are using a Mac portable computer, you can also right-click using the trackpad.

To right-click using a Mighty Mouse:

m Click the upper-right side of the mouse.

To right-click using a trackpad:

m Place two fingers on the trackpad and click the trackpad button.

Scrolling with a Trackpad

If you are using a Mac portable computer, you can use two fingers to scroll with the

trackpad.

To scroll using a trackpad:

m Move two fingers on the trackpad simultaneously, vertically or horizontally.

Using an Apple Remote

If your computer is equipped with a built-in infrared receiver, you can use an Apple

Remote to control iTunes and Windows Media Player (not included with Boot Camp).

The remote lets you change the sound volume, start or pause playback, and skip to the

next or previous item. You can also use the remote to open iTunes in Windows.

To open iTunes using an Apple Remote:

m Press the Menu button.

If iTunes is already open, you can press the Menu button to bring iTunes to the front.

The Apple Remote uses an infrared transmitter, and works with Mac computers that

have an infrared receiver. If the remote has an unobstructed line of sight to the

receiver, it can work at a distance of up to 30 feet.

Pairing Your Computer with an Apple Remote

If you have more than one infrared-equipped computer at the same location, you can

“pair” each computer with a specific Apple Remote. Otherwise, the computer takes

commands from any remote within range.

Pairing sets the computer to take commands only from the specified remote. You can

pair your computer with only one remote at a time.

To pair your computer with a remote:

1 Hold the remote close to the computer (3 to 4 inches) and point the remote at the

front of the computer.

2 Press and hold both » and ‘ on the remote for about 5 seconds, until a chain link

( ) symbol appears onscreen.

Unpairing Your Computer from an Apple Remote

Pairing your computer with a remote tells the computer to take commands only from

the specified Apple Remote. You can pair your computer with only one remote at a

time. If you’ve paired your computer with an Apple Remote, you must unpair the

computer before you can use the computer with a different remote.

To unpair your computer from an Apple Remote:

1 In Windows, open the Boot Camp control panel and click the Remote tab.

2 Click Unpair.

Disabling Remote Control

You can use the Boot Camp control panel to disable the infrared receiver and prevent

remote control of your computer.

To disable the infrared receiver:

1 In Windows, open the Boot Camp control panel and click the Remote tab.

2 Select the “Disable remote control infrared receiver” checkbox.

To turn infrared reception back on, deselect the option.

Using Bluetooth Devices with Windows

Before you can use a Bluetooth wireless device with Windows on your Mac, you must

pair the device with your computer while running Windows.

To pair a wireless Mighty Mouse or Apple keyboard with your Mac:

1 In Windows, open the Bluetooth Devices control panel.

2 In the Devices pane, click Add.

3 Follow the Bluetooth Device Wizard to set up your device.

a To make your Apple wireless device discoverable, turn the device off and then on

again.

b In the passkey pane, select “Let me choose my own passkey” and enter a numeric

code.

Wireless Mighty Mouse: Enter four zeros (“0000”).

Apple Wireless Keyboard: Enter six to sixteen digits.

Passkeys for wireless devices are used to encrypt the information transmitted from the

devices to your computer. You don’t need to remember the passkey.

Ejecting Discs

You can eject a CD or DVD using the Eject (C) key on an Apple keyboard. If your

computer has an optical drive with a tray, use the Eject key to open or close the tray.

You can also eject a disc by using Windows Explorer.

To eject a disc, do one of the following:

m Press and hold the Eject key on your Apple keyboard until the eject (C) symbol appears

onscreen.

m Right-click the disc icon in Windows Explorer and choose Eject from the menu that

appears.

m Select the disc icon in Windows Explorer and click Eject.

m Hold down the primary mouse button as you start up your computer, until the disc

ejects.

If you have a Mac Pro computer, you can press Option-Eject to open or close the tray of

an optional second optical drive.

Setting Your Computer to Restart Automatically After a Power Failure

Setting your computer to restart automatically after a power failure might be useful if

you need to access your computer remotely.

To set your computer to restart automatically after a power failure:

1 Click the Boot Camp system tray item and choose Boot Camp Control Panel.

2 Click the Power tab.

3 Select “Restart automatically after a power failure.”

Using Third-Party Utilities

Before installing and using a third-party disk utility for Windows, check with the vendor

to make sure the utility is compatible with Boot Camp.

NOTICE: Data loss can occur when using a disk utility that is not compatible with

Boot Camp.

Removing Windows from Your Computer

How you remove Windows from your computer depends on whether you installed

Windows on a single-volume disk or on a second disk partition.

If you installed Windows on a second disk partition: Using Boot Camp Assistant as

described below, remove Windows by deleting the Windows partition and restoring

the disk to a single-partition Mac OS X volume.

If your computer has multiple disks and you installed Windows on a disk that has only one

partition: Start up in Mac OS X and use Disk Utility, in /Applications/Utilities, to erase

the disk and reformat it as a Mac OS X volume.

To delete Windows and the Windows partition:

1 Start up in Mac OS X.

2 Quit all open applications and log out any other users on your computer.

3 Open Boot Camp Assistant.

4 Select “Create or remove a Windows partition” and click Continue.

5 Do one of the following:

Â If your computer has a single internal disk, click Restore.

Â If your computer has multiple internal disks, select the disk with Windows on it, and

then select “Restore to a single Mac OS partition” and click Continue.

NOTICE: Make a backup of the important information on your computer before

removing Windows. Windows software and all other information on the Windows

partition will be erased.

Page is loading ...

Apple v10.5 Quick start guide

Brand: Apple

Model: v10.5

Category: Software

Type: Quick start guide

Download PDF

report

Apple v10.5 Quick start guide

Apple v10.5 Quick start guide

Related papers

Other documents